Tanaka Tomohisa 田中智久

… Alternative Names

田中智久タナカトモヒサ

TANAKA Tomohisa 田中智久

Less

Researcher Number	70334513
Other IDs
Affiliation (Current)	2025: 東京科学大学, 工学院, 准教授
Affiliation (based on the past Project Information) *help	2025: 東京科学大学, 工学院, 准教授 2018 – 2023: 東京工業大学, 工学院, 准教授 2016: 名古屋大学, 工学研究科, 准教授 2014 – 2015: 名古屋大学, 工学(系)研究科(研究院), 准教授 2012: 東京工業大学, 理工学研究科, 准教授 … More 2010 – 2011: 東京工業大学, 大学院・理工学研究科, 准教授 2006: 東京工業大学, 大学院理工学研究科, 助教授 2002 – 2005: 東京工業大学, 大学院・理工学研究科, 助手 Less
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 90:Biomedical engineering and related fields / Production engineering/Processing studies / Design engineering/Machine functional elements/Tribology Except Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related / 設計工学・機械要素・トライボロジー
Keywords	Principal Investigator 選択的切除 / 局所剛性計測 / 超音波 / 振動応答 / センシング / 生体組織 / 剛性 / 荷重計測 / 超音波加振 / リアルタイム剛性計測 … More / 高周波メス / 非線形振動応答 / 自由曲面 / YAGレーザ / 酸化膜 / 明度 / 色相 / チタン / 酸化被膜形成 / レーザマルチカラーリング / 二酸化チタン / 表面粗さ / YVO4レーザ / 微細加工 / 薄膜干渉 / 酸化被膜 / レーザカラーリング / 全反射顕微鏡 / 直接数値接触解析 / プラトー率 / 機能表面 / 統計的接触解析 / 接線力 / 全反射 / トランケーション / 真実接触面積 / 粗さ接触面 … More Except Principal Investigator 多軸制御 / テクスチャリング / しゅう動面 / 摩擦制御 / 超音波応用加工 / 転写 / 塑性加工 / 圧縮力 / 転写加工 / 超音波 / 摩擦力 / 押付力 / テクスチャ / ローレット加工 / 超音波振動 / 振動利用技術 / thermal melting / thermal decomposition / not-wire cutting / proto-typing / multi-axes control / polystyrene foam / 発泡スチロール / 熱分解 / 熱溶解 / 熱線加工 / プロトタイピング / 発砲スチロール / Tangential Force / Burwell-Strang's Hypothesis / Surface Roughness / Real Contact / Wear Mode / Adhesion / Wear / Contact / 摩擦 / 接線力 / Burwell-Strangの仮説 / 表面粗さ / 真実接触 / 摩耗形態 / 凝着 / 摩耗 / 接触 / CG技術 / 機械工作・生産工学 / 画像簡略化 / 三次元形状計測 / 自由曲面加工 / 生産システム Less

伸縮/ねじれ複合振動による切削作用を用いた革新的穴加工技術の開発Principal Investigator
- Principal Investigator
  
  田中智久
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Institute of Science Tokyo
Development of a safe and efficient electrical scalpel by real-time measurement of local tissue stiffnessPrincipal Investigator
- Principal Investigator
  
  田中智久
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 90:Biomedical engineering and related fields
- Research Institution
  Tokyo Institute of Technology
Development of Micro Ultrasonic Knurling Technology for High Strength Texturing to Large Area Sliding Surface
- Principal Investigator
  
  Aoki Shigeru
- Project Period (FY)
  2018 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Tokyo Metropolitan College of Industrial Technology
Clarification of the laser coloring mechanism and its application to high precision multi-color printingPrincipal Investigator
- Principal Investigator
  
  Tanaka Tomohisa
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Construction of Combined System of Machining and Measuring processes for Free-Form Surface of Polystyrene Foam usingsimplification procedure in CG Technology.
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
機能表面の幾何形状がすべり接触特性に及ぼす影響Principal Investigator
- Principal Investigator
  
  田中智久
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Tokyo Institute of Technology
Development of 3D Digital Proto-Typing Machine Based on Multi-Axes Controlled Hot-Wire Cutting for Polystyrene Foam
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Development of wear-mode transition model based on analysis of contact mechanics of rough surfaces
- Principal Investigator
  
  KYOGOKU Keiji
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Tokyo Institute of Technology

All 2022 2021 2020 2019 2013 2012 2011 2010 2005 2003

All Journal Article Presentation

[Journal Article] Reduction of Pressing Force and Friction Force in Micro Ultrasonic Knurling Technology Creating High precision Texture2021
- Author(s)
  Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
- Journal Title
  
  Information
  
  Volume: 24-2 Pages: 117-122
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03890
[Journal Article] A Fundamental Experiment for Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface2020
- Author(s)
  Shugeru Aoki, Yasunori Sakai, Tomohisa Tanaka
- Journal Title
  
  Information
  
  Volume: 23-3 Pages: 205-212
- NAID
  40022400649
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03890
[Journal Article] Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect)2020
- Author(s)
  Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
- Journal Title
  
  Information
  
  Volume: 22-1 Pages: 25-32
- NAID
  40022216304
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03890
[Journal Article] Registra- tion of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm2012
- Author(s)
  Xiaoyi Wang, Jing Chen, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka.
- Journal Title
  
  Advanced Materials Research, Trans Tech Publications
  
  Volume: Vol.472-475 Pages: 317-322
- URL
  http://www.scientific.net/AMR.472-475.317.pdf
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Generating the Measurement Points Based on Finishing NC Data2011
- Author(s)
  Asim Al-Sofi, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu
- Journal Title
  
  Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)
  
  Pages: 34-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool2011
- Author(s)
  Jiang Zhu, Tomohisa TANAKA, Yoshio SAITO, Ryuta TANABE, Masaaki TAKENAKA, Toru FUKAMI
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: 5巻4号 Pages: 240-251
- NAID
  130001293194
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] 3D Model Registra- tion Based on Feature Extraction2011
- Author(s)
  Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka,Yoshio Saito.
- Journal Title
  
  Advanced Materials Research, Trans Tech Publications Switzerland
  
  Volume: Vol.299-300 Pages: 1091-1094
- URL
  http://www.scientific.net/AMR.299-300.1091.pdf
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation2011
- Author(s)
  Jiang Zhu, Tomohisa Tanaka, Yoshio Saito, Lining Sun.
- Journal Title
  
  International Journal of Design Engineering, Interscience Enterprises Ltd.
  
  Volume: Vol.3,No.3 Pages: 218-231
- URL
  http://www.inderscience.com/IJDE030301
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] 3D Model Registration Based on Feature Extraction2011
- Author(s)
  Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka, Yoshio Saito
- Journal Title
  
  Advanced Materials Research
  
  Volume: 299-300 Pages: 1091-1094
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Tool Path Planning Assist System for Freeform Surface Machining2010
- Author(s)
  朱彊, 野村佳佑, 田中智久, 齋藤義夫
- Journal Title
  
  Key Engineering Materials
  
  Volume: 447-448 Pages: 321-325
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Excimer Laser 3D Machining Based on Irradiation Pulse Number Control2010
- Author(s)
  田中智久, 鈴木僚, 朱彊, 齋藤義夫
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: 4 Pages: 1033-1043
- NAID
  130000335377
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Automatic Manufacturing Feature Extraction of CAD Models for Machining2010
- Author(s)
  奈良部優介, 朱彊, 田中智久, 齋藤義夫
- Journal Title
  
  Key Engineering Materials
  
  Volume: 447-448 Pages: 287-291
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Tool Path Planning Assist System for Freeform Surface Machining2010
- Author(s)
  JIANG ZHU, Keisuke Nomura, TOMOHISA TANAKA, YOSHIO SAITO.
- Journal Title
  
  Key Engineering Materials, Trans Tech Publications
  
  Volume: Vol.447-448 Pages: 321-325
- URL
  http://www.scientific.net/KEM.447-448.321
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Automatic Manufacturing Feature Extraction of CAD Models for Machining2010
- Author(s)
  Yuusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO.
- Journal Title
  
  Key Engineering Materials, Trans Tech Publications
  
  Volume: Vol.447-448 Pages: 287-291
- URL
  http://www.scientific.net/KEM.447-448.287
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] 8軸制御曲面加工システムの構築とそのプログラミング2005
- Author(s)
  杉恵貴史, 田中智久, 斎藤義夫
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 939-940
- NAID
  130004657716
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] 8軸制御局面加工システムの構築とそのプログラミング2005
- Author(s)
  杉恵貴史, 田中智久, 斎藤義夫
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 939-940
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] Construction of 8 Axes Controlled Machining System for Free Form Surface and it's Programming.2005
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Yoshio Saito
- Journal Title
  
  Proceeding of Spring Annual Meeting meeting of Japan Society for Precision Engineering
  
  Pages: 939-940
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] An Approximation of Free-Formed Surface for NC Machining2003
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito
- Journal Title
  
  International Conference on Leading Edge Manufacturing, in 21st Century
  
  Pages: 457-460
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] An Approximation of Free-Formed Surface for NC Machining2003
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito
- Journal Title
  
  International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 457-460
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] An Approximation of Free-Formed Surface for NC Machining.2003
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito
- Journal Title
  
  International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 457-460
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Presentation] テクスチャ転写技術への超音波振動の応用2022
- Author(s)
  青木繁，酒井康徳，田中智久
- Organizer
  電子情報通信学会超音波研究会
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 高精度テクスチャを創成する超音波応用転写加工技術の開発（加振振動数の影響）2021
- Author(s)
  青木繁，酒井康徳，田中智久
- Organizer
  山梨講演会2021
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] Reduction of Pressing Force and Frictiom Force in Miro Ultrasonic Knurling Techmology Creating High Precision Texture2021
- Author(s)
  Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
- Organizer
  The Tenth International Conference on Information
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface in Mechanical System (Fundamental Experiment)2021
- Author(s)
  Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka
- Organizer
  ASME 2021 Pressure Vessels & Piping Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 高精度テクスチャを創生する超音波応用転写加工技術の開発（格子状平面テクスチャの転写）2020
- Author(s)
  青木繁酒井康徳田中智久劉士豪
- Organizer
  日本機械学会北陸信越支部第57期総会講演会
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 超音波応用転写加工技術を用いた格子状平面テクスチャの転写2020
- Author(s)
  青木繁、酒井康徳、田中智久
- Organizer
  電子情報通信学会超音波研究会
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 高精度テクスチャを創生する超音波応用転写加工技術の開発（押付力と摩擦力の低減）2020
- Author(s)
  青木繁、酒井康徳、田中智久
- Organizer
  山梨講演会
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] Micro Ultrasonic Knurling Technology for Creating High Precision Teture on Sliding Surface (Fundamental Experiment)2019
- Author(s)
  青木繁，酒井康徳,田中智久
- Organizer
  International Conference on Mechanical, Electrical and Medical Intelligent System 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 超音波振動を利用した転写加工技術のための基礎研究2019
- Author(s)
  青木繁酒井康徳田中智久劉士豪
- Organizer
  電子情報通信学会超音波研究会
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 高精度テクスチャを創生する超音波応用転写加工技術の開発（基礎的実験）2019
- Author(s)
  青木繁，酒井康徳，田中智久,劉士豪
- Organizer
  日本機械学会Dynamics and Design Conference2019
- Data Source
  KAKENHI-PROJECT-18K03890
[Presentation] 三次元形状モデルからの加工工程自動決定システムの開発2013
- Author(s)
  武藤沙織, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2013年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 多分解能メッシュによる多軸加工機の粗加工の効率化2013
- Author(s)
  長谷川将臣, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2013年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] NURBS曲面の分割による高効率加工パスの生成2013
- Author(s)
  穂積昭充, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2013年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムを用いた加工システムの構築2012
- Author(s)
  関口翔太, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2012年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Year and Date
  2012-03-12
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムを用いた加工システムの構築2012
- Author(s)
  関口翔太,朱疆,田中智久,齋藤義夫.
- Organizer
  2012年度精密工学会春季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 多分解能メッシュによるターニングセンタの粗加工工程の検証2012
- Author(s)
  長谷川将臣,朱疆,田中智久,齋藤義夫.
- Organizer
  日本機械学会生産システム部門研究発表講演会2012講演論文集,日本機械学会
- Place of Presentation
  東京
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model2012
- Author(s)
  Jiang Zhu, Tomohisa Tanaka, Yoshio Saito.
- Organizer
  The 2nd IFToMM Asian Conference on Mechanism and Machine Science
- Place of Presentation
  Japan(Tokyo)
- Year and Date
  2012-11-08
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 多分解能メッシュによるターニングセンタの粗加工工程の検証2012
- Author(s)
  長谷川将臣, 朱疆, 田中智久, 齋藤義夫
- Organizer
  日本機械学会生産システム部門研究発表講演会2012講演論文集
- Place of Presentation
  東京
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 三次元形状モデルからの加工法自動決定システムの開発2011
- Author(s)
  奈良部優介,朱疆,田中智久,齋藤義夫
- Organizer
  2011年度精密工学会春季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2011-04-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] ManufacturingFeatureExtractionSystemof3D-ModelforProcessPlanning2011
- Author(s)
  JiangZhu,YusukeNarabu,TomohisaTanaka,YoshioSaito.
- Organizer
  ProceedingofThe6thInternationalConferenceonLeadingEdgeManufacturingin21stCentury(LEM21),TheJapanSocietyofMechanicalEngineers(JSME)
- Place of Presentation
  Japan(Saitama)
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムによる三次元加工2011
- Author(s)
  関口翔太, 朱疆, 田中智久, 齋藤義夫
- Organizer
  日本機械学会2011年度年次大会講演論文集
- Place of Presentation
  東京
- Year and Date
  2011-09-11
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] RP装置による三次元形状の創成と評価2011
- Author(s)
  武藤沙織,朱疆,田中智久,齋藤義夫
- Organizer
  日本機械学会2011年度年次大会講演論文集,日本機械学会
- Place of Presentation
  東京
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムによる三次元加工2011
- Author(s)
  関口翔太,朱疆,田中智久,齋藤義夫.
- Organizer
  日本機械学会2011年度年次大会講演論文集,日本機械学会
- Place of Presentation
  東京
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 三次元モデルの比較による形状評価システムの構築2011
- Author(s)
  武隈裕一,朱疆,田中智久,齋藤義夫
- Organizer
  2011年度精密工学会春季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2011-04-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] GeneratingtheMeasurementPointsBasedonFinishingNCData2011
- Author(s)
  AsimAl-Sofi,YoshioSaito,TomohisaTanaka,JiangZhu
- Organizer
  Proceedingof2011IEEEInternationalConferenceonMechatronics(ICM)
- Place of Presentation
  Turkey(Istanbul)
- Year and Date
  2011-04-13
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] RoughMachiningToolPathGenerationforMulti-axisTurningCenterBasedonMulti-resolutionMesh2010
- Author(s)
  JiangZhu,KeisukeNomura,TomohisaTanaka,YoshioSaito
- Organizer
  Proceedingofthe14thInternationalConferenceonMechatronicsTechnology
- Place of Presentation
  Japan(Oosaka)
- Year and Date
  2010-11-24
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 2.5軸輪郭加工に適した高効率加工パスの生成2010
- Author(s)
  西山浩司,朱疆,田中智久,齋藤義夫
- Organizer
  2010年度精密工学会秋季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2010-09-29
- Data Source
  KAKENHI-PROJECT-22360058

1. ZHU Jiang (70509330)

# of Collaborated Projects: 3 results

# of Collaborated Products: 28 results
2. SAITO Yoshio (00108218)

# of Collaborated Projects: 2 results

# of Collaborated Products: 34 results
3. KYOGOKU Keiji (70153236)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. MOMOZONO Satoshi (70262300)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. Aoki Shigeru (20106610)

# of Collaborated Projects: 1 results

# of Collaborated Products: 13 results
6. AKBARI Javad (20334542)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
7. 酒井康徳 (70774769)

# of Collaborated Projects: 1 results

# of Collaborated Products: 13 results

Tanaka Tomohisa 田中 智久

田中 智久 タナカ トモヒサ

TANAKA Tomohisa 田中 智久

Research Projects

Research Products

Co-Researchers

伸縮/ねじれ複合振動による切削作用を用いた革新的穴加工技術の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of a safe and efficient electrical scalpel by real-time measurement of local tissue stiffnessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of Micro Ultrasonic Knurling Technology for High Strength Texturing to Large Area Sliding Surface

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Clarification of the laser coloring mechanism and its application to high precision multi-color printingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Construction of Combined System of Machining and Measuring processes for Free-Form Surface of Polystyrene Foam usingsimplification procedure in CG Technology.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

機能表面の幾何形状がすべり接触特性に及ぼす影響Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of 3D Digital Proto-Typing Machine Based on Multi-Axes Controlled Hot-Wire Cutting for Polystyrene Foam

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of wear-mode transition model based on analysis of contact mechanics of rough surfaces

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Reduction of Pressing Force and Friction Force in Micro Ultrasonic Knurling Technology Creating High precision Texture2021

Author(s)

Journal Title

Data Source

[Journal Article] A Fundamental Experiment for Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface2020

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect)2020

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Registra- tion of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm2012

Author(s)

Journal Title

URL

Data Source

[Journal Article] Generating the Measurement Points Based on Finishing NC Data2011

Author(s)

Journal Title

Data Source

[Journal Article] On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool2011

Author(s)

Journal Title

Tanaka Tomohisa 田中智久

田中智久タナカトモヒサ

TANAKA Tomohisa 田中智久