Shimamura Yoshinobu 島村佳伸

… Alternative Names

島村佳伸シマムラヨシノブ

SHIMAMURA Yoshinobu 島村佳伸

Less

Researcher Number	80272673
Other IDs	https://orcid.org/0000-0003-1698-9012
External Links
Affiliation (Current)	2025: 静岡大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2023: 静岡大学, 工学部, 教授 2019 – 2021: 静岡大学, 工学部, 教授 2015 – 2017: 静岡大学, 工学部, 教授 2013 – 2014: 静岡大学, 工学研究科, 准教授 2013: 静岡大学, 工学(系)研究科(研究院), 准教授 … More 2007 – 2012: Shizuoka University, 工学部, 准教授 2006: 静岡大学, 工学部, 助教授 2000 – 2004: Tokyo Institute of Technology, Graduate School of Science and Engineering, Research Assistant, 大学院・理工学研究科, 助手 1995 – 1999: 東京工業大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Basic Section 18010:Mechanics of materials and materials-related / Materials/Mechanics of materials Except Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials / Composite materials/Physical properties
Keywords	Principal Investigator 炭素繊維強化プラスチック / 超高サイクル疲労 / 超音波疲労試験 / 超高サイクル / 疲労 / 複合材料 / CFRP / 疲労強度 / 超音波疲労試験法 / ひずみ速度 … More / 炭素繊維強化プラスチック積層板 / 擬似等方性積層板 / 直交積層板 / 積層板 / 繊維強化プラスチック / 疲労機構 / 疲労特性 / バイオマスプラスチック / 天然繊維 / バイオマス / 機械材料・材料力学 / 植物由来材料 / テクスチャ解析 / 配向制御 / カーボンナノチューブ / 吸湿 / ボルト継手 / ヘルスモニタリング / 電気ポテンシャル法 … More Except Principal Investigator 複合材料 / Delamination / CFRP / ひずみ / Composites / 電気抵抗 / 層間はく離 / Inverse Analysis / Reinforcement of Weld / Welding Residual Stresses / Eigen-Strain / Bead Flush Method / 非破壊評価 / 寿命延伸 / 逆問題解析 / 溶接残留応力 / 固有ひずみ / ビードフラッシュ法 / Smart structure / 損傷 / FRP / スマート構造 / 機械材料・材料力学 / 放電プラズマ焼結 / 生体適合傾斜機能材料 / 複合材料・物性 / 残留応力 / セラミックス / 材料設計 / 材料試験 / 異材界面相 / Electrical Potential / Electrical Resistance / Monitoring / Carbon Fiber / 硬化 / 電気インピーダンス / 無線 / マトリックス割れ / 電気抵抗変化 / 電位差 / モニタリング / はく離 / 炭素繊維 / Damage / Monitor / モニター / Welding Simulation / 溶接シミュレーション / Response surface / Electric resistance / Composite materials / 知的構造 / 応答曲面 / Life Extension / 溶接 / 適切化法 / 余盛り / Fe-H potential / Molecular Dynamics / Ddformation / Fracture / Hydrogen Diffusion / Interface / 強度 / 水素侵入 / α鉄 / Fe-Hポテンシャル / Fe-H ポテンシャル / 分子動力学 / 変形 / 破壊 / 水素拡散 / 界面 / Strain sensor / Strain / Optical fiber / ひずみセンサー / 光ファイバー / CNT紡績糸 / CNT複合材 / 紡績糸 / 機械特性 / カーボンナノチューブ / シミュレーション工学 / 構造・機能材料 / 化合物 / 部分安定化ジルコニア / 経年変化割れ / 強度特性 / 粉末冶金 / 傾斜機能複合材料 / チタン / ハイドロキシアパタイト / 金属射出成形法 / 粉末冶金法 / 医用傾斜機能材料 / オーステナイト系ステンレス鋼 / 分布き裂 / 表面き裂 / き裂進展 / き裂合体 / き裂発生 / モンテカルロ・シミュレーション / 応力腐食割れ / 接合強度 / 熱応力 / 太陽電池 / 薄膜 / 接合界面 / カテゴリーウェイト / ファジ-集合 / メンバーシップ関数 / 推論モデル / 破損事故解析 / ファジ-数量化理論 / 形状効果 / 引張強度 / 金属接合 / 接合 Less

Vildation of Evaluating Fatigue Strength of Carbon Fiber Reinforced Plastic Laminates by Using Ulatrasonic Fatigue Testing MethdPrincipal Investigator
- Principal Investigator
  
  島村佳伸
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Shizuoka University
Investigation of Very High Cycle Fatigue Property of CFRP Laminate by using Ultrasonic Fatigue Testing MachinePrincipal Investigator
- Principal Investigator
  
  Shimamura Yoshinobu
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Shizuoka University
Fabrication of biocompatible functionally graded materials considering creation of bimaterials-interphase in spark plasma sintering
- Principal Investigator
  
  TOHGO KEIICHIRO
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
Development of Accelerated Testing Method for Very High Cycle Fatigue of CFRPPrincipal Investigator
- Principal Investigator
  
  Shimamura Yoshinobu
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
Numerical simulation of spark plasma sintering process and fabrication of titanium-based biocompatible functionally graded materials
- Principal Investigator
  
  TOHGO KEIICHIRO
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
Study of novel carbon materials using spinnable CNT structural materials
- Principal Investigator
  
  INOUE YOKU
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Composite materials/Physical properties
- Research Institution
  Shizuoka University
Fatigue Property of Natural Fiber Reinforced Biomass PlasticsPrincipal Investigator
- Principal Investigator
  
  SHIMAMURA Yoshinobu
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
ハイドロキシアパタイト-チタン医用傾斜機能材料のMIM法による創生技術と強度評価
- Principal Investigator
  
  東郷敬一郎, 荒木弘安
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
Study on multi-scale behavior of stress corrosion cracking and life prediction based on unified simulation
- Principal Investigator
  
  TOHGO Keiichiro
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
High performance carbon nanotube composite using nano-network morphology controlPrincipal Investigator
- Principal Investigator
  
  SHIMAMURA Yoshinobu
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Shizuoka University
History Memorable Monitoring System for Composites using Electrical Impedance Changes
- Principal Investigator
  
  TODOROKI Akira
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
複合材料ボルト継手のスマート化によるヘルスモニタリングPrincipal Investigator
- Principal Investigator
  
  島村佳伸
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
Plug & Monitor Type Delamination Diagnostic CFRP Structure System using Electric Resistance Change Method
- Principal Investigator
  
  TODOROKI Akira
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
Evaluation of Welding Eigenstrain Characteristics and Its Application to the Bead Flush Method
- Principal Investigator
  
  NAKAMURA Haruo
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Development of Computer-aided nondestructive Evaluation Method of Welding Residual Stresses for Life Extension of Large Plants
- Principal Investigator
  
  KOBAYASHI Hideo
- Project Period (FY)
  1999 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
CFRP電気抵抗変化の応答曲面を用いたLAN型損傷検知統合システム
- Principal Investigator
  
  TODOROKI Akira
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
Research on Improvement of Endurance against Hydrogen for Multi-Layered Electrode in Flexible Module Like Solar Cell Structure
- Principal Investigator
  
  NAKAMURA Haruo
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
フレキシブルアモルファスシリコン太陽電池モジュールの薄膜積層構造の最適化
- Principal Investigator
  
  中村春夫
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
セラミックス/金属接合材の疲労破壊プロセスと疲労強度評価手法の提案
- Principal Investigator
  
  KOBAYASHI Hideo
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
ファジ-数量化理論に基づく破損事故解析の推論モデル構築に関する研究
- Principal Investigator
  
  中村春夫
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
Development of Smart Structure for Thermo-Insulating-FRP-Support-Structure by Using Optical Fiber Sensor
- Principal Investigator
  
  KOBAYASHI Hideo
- Project Period (FY)
  1994 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology

[Journal Article] Fabrication of alumina-titanium composites by spark plasma sintering and their mechanical properties2018
- Author(s)
  Tomoyuki Fujii, Keiichiro Tohgo, Masahiro Iwao, Yoshinobu Shimamura
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 744 Pages: 759-768
- DOI
  10.1016/j.jallcom.2018.02.142
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H03891
[Journal Article] Fabrication of a PSZ-Ti functionally graded material by spark plasma sintering and its fracture toughness2017
- Author(s)
  1.Tomoyuki Fujii, Keiichiro Tohgo, Hiroshi Isono, Yoshinobu Shimamura
- Journal Title
  
  Materials Science & Engineering A
  
  Volume: 682 Pages: 656-663
- DOI
  10.1016/j.msea.2016.11.091
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H03891
[Journal Article] Densification process in fabrication of PSZ-Ti composites by spark plasma sintering technique2017
- Author(s)
  Tomoya Shinohara, Tomoyuki Fujii, Keiichiro Tohgo, Yoshinobu Shimamura
- Journal Title
  
  Materials Characterization
  
  Volume: 132 Pages: 230-238
- DOI
  10.1016/j.matchar.2017.08.016
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H03891
[Journal Article] Tensile Mechanical Properties of Carbon Nanotube/Epoxy Composite Fabricated by Pultrusion of Carbon Nanotube Spun Yarn Preform2014
- Author(s)
  Y. Shimamura, K. Oshima, K. Tohgo, T. Fujii,K. Shirasu, G. Yamamoto, T. Hashida, K. Goto, T. Ogasawara, K. Naito, T. Nakano, Y. Inoue
- Journal Title
  
  Composites Part A
  
  Volume: 62 Pages: 32-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360293
[Journal Article] Influence of particle size and debonding damage on an elastic-plastic singular field around a crack-tip in particulate-reinforced composites2014
- Author(s)
  K.Tohgo, T.Fujii, D.Kato, Y.Shimamura
- Journal Title
  
  Acta Mechanica
  
  Volume: Vol.225 Issue: 4-5 Pages: 1373-1389
- DOI
  10.1007/s00707-013-1052-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360053
[Journal Article] Nanoscopic observations for evaluating the failure process of aligned multi-walled carbon nanotube / epoxy composites2013
- Author(s)
  T. Tsuda, T. Ogasawara, S-Y Moon, K. Nakamoto, N. Takeda, Y. Shimamura, Y. Inoue
- Journal Title
  
  Composites Science and Technology
  
  Volume: 88 Pages: 48-56
- DOI
  10.1016/j.compscitech.2013.08.034
- NAID
  120006832358
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360293, KAKENHI-PROJECT-23560823
[Journal Article] 配向カーボンナノチューブ/エポキシ複合材料の力学特性2013
- Author(s)
  小笠原俊夫, 仲本兼悟, 津田皓正, 小川武史, 文淑英, 島村佳伸, 井上翼
- Journal Title
  
  日本複合材料学学会誌
  
  Volume: 39 Pages: 240-247
- NAID
  130004872165
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360293
[Journal Article] Nanoscopic observations for evaluating the failure process of aligned multi-walled carbon nanotube/epoxy composites2013
- Author(s)
  T. Tsuda, T. Ogasawara, S-Y Moon, K. Nakamoto, N. Takeda, Y. Shimamura, Y. Inoue
- Journal Title
  
  Composites Science and Technology
  
  Volume: 88 Pages: 48-56
- NAID
  120006832358
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360293
[Journal Article] Effect of Matrix Properties on Fatigue Strength of Unidirectional Jute Spun Yarn Reinforced PLA2013
- Author(s)
  加藤木秀章,島村佳伸,東郷敬一郎,藤井朋之,竹村兼一
- Journal Title
  
  Journal of the Japan Society for Composite Materials
  
  Volume: 39 Issue: 1 Pages: 24-30
- DOI
  10.6089/jscm.39.24
- NAID
  10031170963
- ISSN
  0385-2563, 1884-8559
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760072
[Journal Article] 配向カーボンナノチューブ/エポキシ複合材料の力学特性2013
- Author(s)
  小笠原俊夫、仲本兼悟、津田皓正、小川武史、文淑英、島村佳伸、井上翼
- Journal Title
  
  日本複合材料学会誌
  
  Volume: 39 Pages: 240-247
- NAID
  130004872165
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360293
[Journal Article] Fatigue Behavior of Unidirectional Jute Spun Yarn Reinforced PLA2012
- Author(s)
  Hideaki Katogi, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii
- Journal Title
  
  Advanced Composite Materials
  
  Volume: Vol.21, No.1 Pages: 1-10
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760072
[Journal Article] Fatigue Property and Mechanism of Unidirectional Jute Spun Yarn Reinforced PLA2011
- Author(s)
  加藤木秀章, 島村佳伸, 東郷敬一郎, 藤井朋之
- Journal Title
  
  Journal of the Japan Society for Composite Materials
  
  Volume: 37 Issue: 6 Pages: 203-208
- DOI
  10.6089/jscm.37.203
- NAID
  10030409121
- ISSN
  0385-2563, 1884-8559
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760072
[Journal Article] Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method2011
- Author(s)
  Toshio Ogasawara, Sook-Young Moon, Yoku Inoue, Yoshinobu Shimamura
- Journal Title
  
  Composites Science and Technology
  
  Volume: 71 Pages: 1826-1833
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360293
[Journal Article] Monte Carlo simulation of stress corrosion cracking on a smooth surface of sensitized stainless steel type 3042009
- Author(s)
  K. Tohgo, H. Suzuki, Y. Shimamura, G. Nakayama, T. Hirano
- Journal Title
  
  Corrosion Science Vol.51
  
  Pages: 2208-2217
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360047
[Journal Article] ステンレス鋼SUS 304における応力腐食割れの表面き裂効果を考慮したモンテカルロ・シミュレーション2008
- Author(s)
  東郷敬一郎, 鈴木洋光, 島村佳伸, 中山元, 平野隆
- Journal Title
  
  日本機会学会論文集A編 74巻
  
  Pages: 128-136
- NAID
  110006571954
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360047
[Journal Article] 応力分布下における応力腐食割れのモンテカルロ・シミュレーション2008
- Author(s)
  鈴木洋光, 東郷敬一郎, 島村佳伸, 中山元, 平野隆
- Journal Title
  
  材料 57巻
  
  Pages: 1191-1197
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360047
[Journal Article] 交流電場によるカーボンナノフィラー/エポキシ複合材料の微視構造制御2007
- Author(s)
  島村佳伸, 奥田尚紀, 東郷敬一郎, 荒木弘安
- Journal Title
  
  材料 56
  
  Pages: 393-398
- NAID
  130002085882
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18760078
[Journal Article] Monte Carlo Simulation of Stress Corrosion Cracking in Structural Metal Materials Taking Account of Surface Crack Effects2007
- Author(s)
  K. Tohgo, H. Suzuki, Y. Shimamura
- Journal Title
  
  Key Engineering Materials Vol.353-358
  
  Pages: 1068-1071
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360047
[Journal Article] 非対称電流負荷による電位差法を用いたCFRP積層板のはく離モニタリング2006
- Author(s)
  上田政人, 轟章, 島村佳伸, 小林英男
- Journal Title
  
  日本機械学会論文集,A編 72・714
  
  Pages: 157-164
- NAID
  110004659090
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560062
[Journal Article] Electrical Resistance Change Method for Monitoring Delaminations of CFRP Laminates : Effect of Spacing between Electrodes2005
- Author(s)
  Akira Todoroki, Miho Tanaka, Yoshinobu Shimamura
- Journal Title
  
  Composites Science and Technology 65・1
  
  Pages: 37-46
- Data Source
  KAKENHI-PROJECT-15560062
[Journal Article] Electrical Resistance Change Method for Monitoring Delaminations of CFRP Laminates : Effect of Spacing between Electrodes2005
- Author(s)
  Akira Todoroki, Miho Tanaka, Yoshinobu Shimamura
- Journal Title
  
  Composites Science and Technology 65(1)
  
  Pages: 37-46
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560062
[Journal Article] 電気抵抗変化を用いたCFRPマトリックス割れの検知2004
- Author(s)
  小曲一臣, 轟章, 島村佳伸, 小林英男
- Journal Title
  
  材料 53・9
  
  Pages: 962-966
- NAID
  10012459205
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560062
[Presentation] CFRP擬似等方性積層板の超高サイクル域における疲労損傷発生と疲労破損に関する研究2021
- Author(s)
  川島大輝，島村佳伸，藤井朋之，細井厚志，川田宏之
- Organizer
  第46回複合材料シンポジウム
- Data Source
  KAKENHI-PROJECT-19K04071
[Presentation] 炭素繊維強化プラスチック積層板への超音波疲労試験技術の適用2019
- Author(s)
  島村佳伸, 林卓矢, 宮崎陸, 東郷敬一郎, 藤井朋之
- Organizer
  64th CON-EX2019講演会
- Data Source
  KAKENHI-PROJECT-19K04071
[Presentation] 超音波疲労試験技術による炭素繊維強化プラスチック擬似等方性積層板の超高サイクル疲労特性の評価2019
- Author(s)
  島村佳伸, 林卓矢, 東郷敬一郎, 藤井朋之
- Organizer
  M&M2019 材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-19K04071
[Presentation] 超音波疲労試験技術による CFRP の超高サイクル疲労試験2019
- Author(s)
  島村佳伸, 林卓矢, 東郷敬一郎, 藤井朋之
- Organizer
  日本材料学会第68期学術講演会信頼性フォーラム
- Invited
- Data Source
  KAKENHI-PROJECT-19K04071
[Presentation] 超音波疲労試験技術の繊維強化プラスチック積層板への適用2019
- Author(s)
  島村佳伸
- Organizer
  日本複合材料学会東北・北海道支部特別講演会
- Invited
- Data Source
  KAKENHI-PROJECT-19K04071
[Presentation] Very High Cycle Fagitue of CFRP Laminate2019
- Author(s)
  Yoshinobu Shimamura, Takuya Hayashi, Hitoshi Miyazaki, Keiichiro Tohgo and Tomoyuki Fujii
- Organizer
  The 2nd International Conference on Nanomaterials & Advanced Composites
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04071
[Presentation] 放電プラズマ焼結により作製したAl2O3/Ti 界面の焼結過程と機械的特性の評価2017
- Author(s)
  後藤健太、藤井朋之、東郷敬一郎、島村佳伸
- Organizer
  日本機械学会、M&M2017材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-15H03891
[Presentation] 放電プラズマ焼結によるAl2O3-Ti複合材料の作製と機械的特性評価2017
- Author(s)
  藤井朋之、東郷敬一郎、岩尾優宏、島村佳伸
- Organizer
  日本材料学会、高温強度・破壊力学合同シンポジウム・第18回破壊力学シンポジウム
- Data Source
  KAKENHI-PROJECT-15H03891
[Presentation] Fabrication of alumina-titanium composites by spark plasma sintering and their mechanical properties2016
- Author(s)
  2.Masahiro Iwao, Tomoyuki Fujii, Keiichiro Tohgo, Yoshinobu Shimamura
- Organizer
  The 10th Asia-Pacific Conference on Fracture and Strength(APCFS2016)
- Place of Presentation
  富山国際会議場、富山県、富山市
- Year and Date
  2016-09-19
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03891
[Presentation] 放電プラズマ焼結によるセラミックス－金属界面相の形成と力学特性の評価2016
- Author(s)
  藤井朋之, 東郷敬一郎, 篠原智也, 島村佳伸
- Organizer
  日本機械学会M&M2016材料力学カンファレンス
- Place of Presentation
  神戸大学六甲台第二キャンパス、兵庫県、神戸市
- Year and Date
  2016-10-08
- Data Source
  KAKENHI-PROJECT-15H03891
[Presentation] Fabrication of PSZ-Ti functionally graded material by spark plasma sintering and its mechanical properties2016
- Author(s)
  1.Tomoyuki Fujii, Keiichiro Tohgo, Hiroshi Isono, Yoshinobu Shimamura
- Organizer
  International Conference of Advances in Mechanical Engineering 2016 (ICAME2016)/14th Joint Symposium among Sister Universities in Mechanical Engineering (JSSUME2016)
- Place of Presentation
  済州島（韓国）
- Year and Date
  2016-09-02
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03891
[Presentation] 放電プラズマ焼結によるPSZ-Ti 複合材料の作製と強度評価2013
- Author(s)
  藤井朋之, 東郷敬一郎, 原田将孝, 島村佳伸
- Organizer
  日本機械学会M&M2013材料力学カンファレンス
- Place of Presentation
  岐阜
- Year and Date
  2013-10-12
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] 諸撚糸プリフォームを用いたカーボンナノチューブ強化エポキシの高強度化2013
- Author(s)
  大島かほり, 島村佳伸, 東郷敬一郎, 藤井朋之, 井上翼
- Organizer
  第38回複合材料シンポジウム
- Place of Presentation
  鹿児島
- Year and Date
  2013-09-24
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 放電プラズマ焼結によるPSZ-Ti 複合材料の作製と機械的特性評価2013
- Author(s)
  原田将孝,藤井朋之,東郷敬一郎,島村佳伸
- Organizer
  日本機械学会東海支部第62期総会講演会
- Place of Presentation
  津
- Year and Date
  2013-03-19
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Mechanical Property of Unidirectional MWNT Tape/PE Composite2013
- Author(s)
  Satoshi Suzuki, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  FEOFS2013
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Investigation of oxygen diffusion behavior in PSZ-Ti composites during spark plasma sintering by multi-physics simulation2013
- Author(s)
  Y.Fukui, T.Fujii, K.Tohgo, Y.Shimamura
- Organizer
  FEOFS2013
- Place of Presentation
  Jeju, Korea
- Year and Date
  2013-06-10
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Mechanical Property of Carbon Nanotube Yarn Reinforced Epoxy2013
- Author(s)
  Yoshinobu Shimamura, Kahori Oshima, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  ICCM-19
- Place of Presentation
  Montreal, Canada
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Tensile Property of CNT Spun Yarn Strand Reinforced Epoxy2013
- Author(s)
  Kahori Oshima, Yoshinobu Shimamura, Keiichirou Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  JISSE-13
- Place of Presentation
  Nagoya, Japan
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Influence of particle size and debonding damage on an elastic-plastic singular field around a crack-tip in particulate-reinforced composites2013
- Author(s)
  K.Tohgo, T.Fujii, D.Kato, Y.Shimamura
- Organizer
  The 9th Japan-Korea Joint Symposium on Composite Materials
- Place of Presentation
  鹿児島
- Year and Date
  2013-09-25
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Fabrication and Strength Evaluation of Biocompatible Ceramic-Metal Composite Materials2013
- Author(s)
  K.Tohgo, T.Fujii, Y.Shimamura
- Organizer
  7th ISAME
- Place of Presentation
  Changwon, Korea
- Year and Date
  2013-01-10
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Influence of Particle Size and Debonding Damage on an Elastic-Plastic Singular Field around a Crack-Tip in Particulate- Reinforced Composites, Society of Engineering Science (SES 2013)2013
- Author(s)
  K.Tohgo, T.Fujii, D.Kato, Y.Shimamura
- Organizer
  50th Anuual Technical meeting ASME-AMD annual summer meeting
- Place of Presentation
  Providence, USA
- Year and Date
  2013-07-29
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] PSZ-Ti複合材料における酸素拡散を考慮した放電プラズマ焼結過程のマルチフィジックス解析2013
- Author(s)
  福井大和, 藤井朋之, 東郷敬一郎, 島村佳伸
- Organizer
  日本機械学会M&M2013材料力学カンファレンス
- Place of Presentation
  岐阜
- Year and Date
  2013-10-12
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] 定荷重および繰返し荷重が作用するジュート単繊維の損傷・破壊挙動2013
- Author(s)
  植松和徳，島村佳伸，加藤木秀章,東郷敬一郎，藤井朋之
- Organizer
  第４回日本複合材料合同会議
- Place of Presentation
  東京大学（東京都）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Effect of Tension Under Curing Process on Mechanical Properties of MWNT Spun Yarn Reinforced Epoxy2013
- Author(s)
  Kahori Oshima, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  Laser Processing for CFRP and Composite Materials 2013
- Place of Presentation
  Yokohama, Japan
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] カーボンナノチューブ紡績糸をプリフォームとしたエポキシ基複合材料の引張特性2012
- Author(s)
  島村佳伸, 石原幹久, 東郷敬一郎, 藤井朋之, 井上翼
- Organizer
  第3回日本複合材料合同会議
- Place of Presentation
  キャンパスプラザ京都、京都市
- Year and Date
  2012-03-08
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 放電プラズマ焼結によるPSZ-Ti 複合材料の創製のためのTi 酸化挙動の評価2012
- Author(s)
  原田将孝,藤井朋之,東郷敬一郎,島村佳伸
- Organizer
  第56回日本学術会議材料工学連合会
- Place of Presentation
  京都
- Year and Date
  2012-10-29
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Effect of Biodegradable Resin on Fatigue Property of Unidirectional Jute Spun Yarn Reinforced Composite2012
- Author(s)
  Hideaki Katogi, Koji Iwata, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii and Kenichi Takemura
- Organizer
  IWGC-7
- Place of Presentation
  グランドホテル浜松（静岡県）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Fatigue Property of Unidirectional Jute Spun Yarn Reinforced PBS Composites2012
- Author(s)
  Koji Iwata, Hirokazu Iguchi, Hideaki Katogi, Yoshinobu Shimamura, Keiichiro Tohgo and Tomoyuki Fujii
- Organizer
  IWGC-7
- Place of Presentation
  グランドホテル浜松（静岡県）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] カーボンナノチューブ紡績糸をプリフォームとしたエポキシ基複合材料の引張特性2012
- Author(s)
  島村佳伸, 石原幹久, 東郷敬一郎, 藤井朋之, 井上翼
- Organizer
  第3回日本複合材料合同会議JCOM-41/JSCM 2012
- Place of Presentation
  京都市
- Year and Date
  2012-03-08
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] ジュート単繊維の疲労特性とその疲労機構2012
- Author(s)
  加藤木秀章, 植松和徳, 島村佳伸, 東郷敬一郎, 藤井朋之
- Organizer
  繊維学会2012年度年次大会
- Place of Presentation
  タワーホール船堀（東京都）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Fabrication of PSZ-Ti composites by spark plasma sintering method2012
- Author(s)
  M.Harada, T.Fujii, K.Tohgo, Y.Shimamura
- Organizer
  JSSUME2012
- Place of Presentation
  長崎
- Year and Date
  2012-08-25
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Effect of Biodegradable Resin on Fatigue Property of Unidirectional Jute Spun Yarn Reinforced Composite2012
- Author(s)
  Hideaki Katogi, Koji Iwata, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii and Kenichi Takemura
- Organizer
  IWGC-7
- Place of Presentation
  Hamamatsu
- Year and Date
  2012-08-30
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Fatigue Property of Jute Monofilament2012
- Author(s)
  Kazunori Uematsu, Hideaki Katogi, Yoshinobu Shimamura, Keiichiro Tohgo and Tomoyuki Fujii
- Organizer
  IWGC-7
- Place of Presentation
  グランドホテル浜松（静岡県）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Jute紡績糸強化PBS複合材料の疲労特性2012
- Author(s)
  岩田幸士, 加藤木秀章, 島村佳伸, 東郷敬一郎,藤井朋之
- Organizer
  繊維学会2012年度年次大会
- Place of Presentation
  タワーホール船堀（東京都）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] 粒子分散複合材料のき裂先端近傍の弾性・弾塑性特異場に及ぼす粒子寸法とはく離損傷の影響2012
- Author(s)
  東郷敬一郎,藤井朋之,加藤大輔,島村佳伸
- Organizer
  日本機械学会M&M2012材料力学カンファレンス
- Place of Presentation
  松山
- Year and Date
  2012-09-23
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] 粒子分散複合材料における粒子寸法効果とはく離損傷を考慮した有限要素法の開発2012
- Author(s)
  加藤大輔,藤井朋之,東郷敬一郎,島村佳伸
- Organizer
  第61回理論応用力学講演会
- Place of Presentation
  東京
- Year and Date
  2012-03-08
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Theory of the Extension of Spun Yarn Reinforced Green Composites2012
- Author(s)
  Yoshinobu Shimamura, Rie Nakamura, Koichi Goda, Keiichiro Tohgo and Tomoyuki Fujii
- Organizer
  IWGC-7
- Place of Presentation
  グランドホテル浜松（静岡県）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] ジュート単繊維の疲労特性とその疲労機構2012
- Author(s)
  加藤木秀章, 植松和徳, 島村佳伸, 東郷敬一郎, 藤井朋之
- Organizer
  繊維学会 2012年度年次大会
- Place of Presentation
  東京都
- Year and Date
  2012-06-08
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] マルチフィジックスシミュレーションによるPSZ-Ti 複合材料の放電プラズマ焼結過程の検討2012
- Author(s)
  藤井朋之,東郷敬一郎,中沢和史,島村佳伸
- Organizer
  第56回日本学術会議材料工学連合会
- Place of Presentation
  京都
- Year and Date
  2012-10-29
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] High Performance CNT Composites Using CNT Preform2012
- Author(s)
  Yoshinobu Shimamura, Mikihisa Ishihara, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  ASC 27th Technical Conference & 15th US-Japan Conference on Composite Materials
- Place of Presentation
  Arlington, USA
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 一方向ジュート紡績糸強化PBS複合材料の疲労特性2012
- Author(s)
  岩田幸士，加藤木秀章，島村佳伸，東郷敬一郎，藤井朋之
- Organizer
  M&M2012
- Place of Presentation
  愛媛大学（愛媛県）
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] カーボンナノチューブ紡績強化エポキシの硬化時の張力が引張特性に及ぼす影響2012
- Author(s)
  大島かほり, 島村佳伸, 東郷敬一郎, 藤井朋之, 井上翼
- Organizer
  第37回複合材料シンポジウム, 日本複合材料学会
- Place of Presentation
  名古屋市
- Year and Date
  2012-10-18
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Fatigue Properties of Unidirectional Jute Spun Yarn Reinforced Biodegradable Resin2011
- Author(s)
  Yoshinobu Shimamura, Hideaki Katogi, Keiichiro Tohgo and Tomoyuki Fujii
- Organizer
  JISSE-12
- Place of Presentation
  Tokyo
- Year and Date
  2011-11-09
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Mechanical properties of millimeter-long unidirectional MWCNT-polymer composites2011
- Author(s)
  Yoku Inoue, Hidenori Mimura, Yoshinobu Shimamura
- Organizer
  2011 MRS Fall Meeting
- Place of Presentation
  ボストン国際会議場、ボストン、米国
- Year and Date
  2011-11-30
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Unidirectional MWCNT sheet/epoxy composites2011
- Author(s)
  Yoku Inoue, Yoshitaka Minami, Junichi Muramatsu, Naoki Morisawa, Mikihisa Ishihara, Yoshinobu Shimamura, Morihiro Okada, Hidenori Mimura
- Organizer
  NT11 International conference on the Scienee and Application of Nanotubes
- Place of Presentation
  ケンブリッジ大学、ケンブリッジ、英国
- Year and Date
  2011-07-10
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Mechanical properties of millimeter-long unidirectional MWCNT-polymer composites2011
- Author(s)
  Yoku Inoue, Hidenori Mimura, Yoshinobu Shimamura
- Organizer
  2011 MRS Fall Meeting
- Place of Presentation
  Boston, USA
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Tensile Property of Carbon Nanotube Spun Yarn Reinforced Composite2011
- Author(s)
  Mikihisa Ishihara, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii, Yoku Inoue, Junichi Muramatsu
- Organizer
  ATEM'11
- Place of Presentation
  神戸国際会議場、神戸市
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 配向性カーボンナノチューブプリフォームを用いたナノコンポジットの成形とその機械的特性2011
- Author(s)
  島村佳伸, 石原幹久, 森澤直樹, 東郷敬一郎, 藤井朋之, 井上翼
- Organizer
  プラスチック成形加工学会第19回秋季大会
- Place of Presentation
  秋田大学、秋田市
- Year and Date
  2011-10-14
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Evaluation of Mechanical Properties of PSZ-Ti Biocompatible Composite Fabricated by MIM Method2011
- Author(s)
  T.Fujii, K.Tohgo, M.Ishikura, Y.Shimamura
- Organizer
  ATEM'11
- Place of Presentation
  神戸
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-23360053
[Presentation] Mechanical Properties of Unidirectional MWNT Sheet/Epoxy Composites2011
- Author(s)
  Naoki Morisawa, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii, Yoku Inoue
- Organizer
  ICCM-18
- Place of Presentation
  国際コンベンションセンター、チェジュ、韓国
- Year and Date
  2011-08-21
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 配向性カーボンナノチューブプリフォームを用いたナノコンポジットの成形とその機械的特性2011
- Author(s)
  島村佳伸, 石原幹久, 森澤直樹, 東郷敬一郎, 藤井朋之, 井上翼
- Organizer
  プラスチック成形加工学会第19回秋季大会
- Place of Presentation
  秋田市
- Year and Date
  2011-10-14
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 一方向ジュート紡績糸強化グリーンコンポジットの疲労特性2011
- Author(s)
  島村佳伸
- Organizer
  56th FRP CON-EX 2011講演会
- Place of Presentation
  大阪市立工業研究所(大阪府)
- Year and Date
  2011-11-01
- Data Source
  KAKENHI-PROJECT-22760072
[Presentation] Tensile Property of Carbon Nanotube Spun Yarn Reinforced Composite2011
- Author(s)
  Mikihisa Ishihara, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii, Yoku Inoue and Junichi Muramatsu
- Organizer
  ATEM'11
- Place of Presentation
  Kobe, Japan
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Mechanical Property of Carbon Nanotube Composite Using Spun Yarn Reinforcement2011
- Author(s)
  Mikihisa Ishihara, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii, Yoku Inoue, Junichi Muramatsu
- Organizer
  ICCM-18
- Place of Presentation
  国際コンベンションセンター、チェジュ、韓国
- Year and Date
  2011-08-21
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] カーボンナノチューブプリフォームを用いた高分子基複合材料の機械的特性2011
- Author(s)
  島村佳伸, 石原幹久, 森澤直樹, 東郷敬一郎, 藤井〓之, 井上翼
- Organizer
  M&M2011カンファレンス
- Place of Presentation
  九州工業大学、北九州市
- Year and Date
  2011-07-16
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Monte Carlo simulation of stress corrosion cracking on smooth surface under non-uniform stress condition2009
- Author(s)
  H. Suzuki, K. Tohgo, Y. Shimamura, G. Nakayama, T. Hirano
- Organizer
  Asian-Pacific Corrosion Forum-Corrosion in Nuclear Systems 2009
- Place of Presentation
  さいたま
- Year and Date
  2009-05-22
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] Monte Carlo simulation of stress corrosion cracking in an austenitic stainless steel type 3042009
- Author(s)
  H. Suzuki, K. Tohgo, Y. Shimamura, G. Nakayama, T. Hirano
- Organizer
  12th International Conference on Fracture
- Place of Presentation
  Ottawa, Canada
- Year and Date
  2009-07-14
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] Monte Carlo simulation of stress corrosion cracking on smooth surface of a sensitized stainless steel type 304 under non-uniform stress condition2009
- Author(s)
  H. Suzuki, K. Tohgo, Y. Shimamura, G. Nakayama, T. Hirano
- Organizer
  APCMM
- Place of Presentation
  横浜
- Year and Date
  2009-11-14
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] 一方向配向CNF/Epoxy複合材料の伝導特性および機械的特性の評価2008
- Author(s)
  千葉利博, 島村佳伸, 東郷敬一郎, 荒木弘安
- Organizer
  M&M2008 材料力学カンファレンス
- Place of Presentation
  草津
- Year and Date
  2008-09-17
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] 応力腐食割れのモンテカルロ・シミュレーションのマルチスケール化2008
- Author(s)
  鈴木洋光, 東郷敬一郎, 島村佳伸, 原木良輔
- Organizer
  日本機械学会M&M2008材料力学カンファレンス
- Place of Presentation
  草津
- Year and Date
  2008-09-17
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] 一方向配向CNF/Epoxy複合材料の材料特性に及ぼすフィラーの種類の影響2008
- Author(s)
  千葉利博, 島村佳伸, 東郷敬一郎, 荒木弘安
- Organizer
  日本機械学会2008年度年次大
- Place of Presentation
  横浜
- Year and Date
  2008-08-04
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] 一方向配向CNF/Epoxy複合材料の伝導特性および機械的特性の評価2008
- Author(s)
  千葉利博, 島村佳伸, 東郷敬一郎, 荒木弘安
- Organizer
  M&M2008材料力学カンファレンス
- Place of Presentation
  草津
- Year and Date
  2008-09-17
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] Monte Carlo Simulation of Stress Corrosion Cracking on Smooth Surface under Non-uniform Stress Condition2008
- Author(s)
  H. Suzuki, K. Tohgo, Y. Shimamura, G. Nakayama, T. Hirano
- Organizer
  JSSUME2008
- Place of Presentation
  浜松
- Year and Date
  2008-08-25
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] Effect of the Type of CNF on Material Properties of Unidirectionally Aligned CNF/Epoxy Composites2008
- Author(s)
  Toshihiro Chiba, Yoshinobu Shimamura, Keiichiro Tohgo and Hiroyasu Araki
- Organizer
  JSSUME2008
- Place of Presentation
  Hamamatsu
- Year and Date
  2008-08-25
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] Monte Carlo Simulation of Stress Corrosion Cracking in an Austenitic Stainless Steel Type 304 Taking Account of Surface Crack Effect2008
- Author(s)
  H. Suzuki, K. Tohgo, Y. Shimamura, G. Nakayama, Y. Sakakibara, T. Hirano
- Organizer
  腐食防食協会材料と環境2008
- Place of Presentation
  大宮
- Year and Date
  2008-05-13
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] Effect of the Type of CNF on Material Properties of Uni-directionally Aligned CNF/Epoxy Composites2008
- Author(s)
  Toshihiro Chiba, Yoshinobu Shimamura, Keiichiro Tohgo and Hirovasu Araki
- Organizer
  JSSUME2008
- Place of Presentation
  浜松
- Year and Date
  2008-08-25
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] 交流電場印可法による一方向配向CSCNT複合材料の電気・熱伝導特性2007
- Author(s)
  千葉利博, 島村佳伸, 東郷敬一郎, 荒木弘安
- Organizer
  日本複合材料学会2007年度研究発表講演会
- Place of Presentation
  東京
- Year and Date
  2007-05-21
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] 応力分布下の平滑表面における応力腐食割れのモンテカルロ・シミュレーション2007
- Author(s)
  鈴木洋光, 東郷敬一郎, 島村佳伸, 中山元, 平野隆
- Organizer
  日本材料学会第13回破壊力学シンポジウム
- Place of Presentation
  熱海
- Year and Date
  2007-12-17
- Data Source
  KAKENHI-PROJECT-19360047
[Presentation] Conductive Properties of Unidirectionally Aligned Carbon Nanofiber/Epoxy composite2007
- Author(s)
  Yoshinobu Shimamura, Toshihiro Chiba, Keiichiro Tohgo, Hiroyasu Araki and Shin Ishiwata
- Organizer
  JISSE-10
- Place of Presentation
  Tokyo
- Year and Date
  2007-11-28
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] 交流電場印可を伴うCNF/Epoxy複合材料の成形とその導電特性の評価2007
- Author(s)
  千葉利博, 島村佳伸, 東郷敬一郎, 荒木弘安
- Organizer
  第32回複合材料シンポジウム
- Place of Presentation
  長崎
- Year and Date
  2007-10-18
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] Conductive Properties of Unidirectionally Aligned Carbon Nanofiber/Epoxy composite2007
- Author(s)
  Yoshinobu Shimamura, Toshihiro Chiba, Keiichiro Tohgo, Hiroyasu Araki and Shin Ishiwata
- Organizer
  JISSE-10
- Place of Presentation
  東京
- Year and Date
  2007-11-28
- Data Source
  KAKENHI-PROJECT-18760078
[Presentation] Mechanical Property of Carbon Nanotube Yarn Reinforced Epoxy
- Author(s)
  Yoshinobu Shimamura, Kahori Oshima, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  ICCM-19
- Place of Presentation
  Palais des congres Montreal（カナダ・モントリオール）
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Tensile Property of CNT Spun Yarn Strand Reinforced Epoxy
- Author(s)
  Kahori Oshima, Yoshinobu Shimamura, Keiichirou Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  JISSE-13
- Place of Presentation
  ウインク愛知（名古屋市）
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] 諸撚糸プリフォームを用いたカーボンナノチューブ強化エポキシの高強度化
- Author(s)
  大島かほり，島村佳伸，東郷敬一郎，藤井朋之，井上翼
- Organizer
  第38回複合材料シンポジウム
- Place of Presentation
  鹿児島大学（鹿児島市）
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Effect of Tension Under Curing Process on Mechanical Properties of MWNT Spun Yarn Reinforced Epoxy
- Author(s)
  Kahori Oshima, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  Laser Processing for CFRP and Composite Materials
- Place of Presentation
  パシフィコ横浜（横浜市）
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Mechanical Properties of Unidirectional MWNT Sheet/Epoxy Composites
- Author(s)
  Naoki Morisawa, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii and Yoku Inoue
- Organizer
  ICCM-18
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Mechanical Property of Carbon Nanotube Composite Using Spun Yarn Reinforcement
- Author(s)
  Mikihisa Ishihara, Yoshinobu Shimamura, Keiichiro Tohgo, Tomoyuki Fujii, Yoku Inoue and Junichi Muramatsu
- Organizer
  ICCM-18
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-23360293
[Presentation] Unidirectional MWCNT sheet/epoxy composites
- Author(s)
  Yoku Inoue, Yoshitaka Minami, Junichi Muramatsu, Naoki Morisawa, Mikihisa Ishihara, Yoshinobu Shimamura, Morihiro Okada and Hidenori Mimura
- Organizer
  NT11 International Conference on the Science and Application of Nanotubes
- Place of Presentation
  Cambridge, UK
- Data Source
  KAKENHI-PROJECT-23360293

1. TODOROKI Akira (50211397)

# of Collaborated Projects: 9 results

# of Collaborated Products: 4 results
2. KOBAYASHI Hideo (00016487)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
3. NAKAMURA Haruo (40134829)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
4. TOHGO Keiichiro (10155492)

# of Collaborated Projects: 6 results

# of Collaborated Products: 33 results
5. FUJII Tomoyuki (30377840)

# of Collaborated Projects: 5 results

# of Collaborated Products: 27 results
6. ARAKI Hiroyasu (60115433)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. INOUE YOKU (90324334)

# of Collaborated Projects: 1 results

# of Collaborated Products: 32 results
8. YASHIRO Shigeki (00452681)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. KATOGI Hideaki (00625296)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 朴位坤 (60238243)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. 細井厚志 (60424800)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
12. HATTORI Toshio

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. AOYAMA Hiroshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Shimamura Yoshinobu 島村 佳伸

島村 佳伸 シマムラ ヨシノブ

SHIMAMURA Yoshinobu 島村 佳伸

Research Projects

Research Products

Co-Researchers

Vildation of Evaluating Fatigue Strength of Carbon Fiber Reinforced Plastic Laminates by Using Ulatrasonic Fatigue Testing MethdPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Investigation of Very High Cycle Fatigue Property of CFRP Laminate by using Ultrasonic Fatigue Testing MachinePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Accelerated Testing Method for Very High Cycle Fatigue of CFRPPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fatigue Property of Natural Fiber Reinforced Biomass PlasticsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High performance carbon nanotube composite using nano-network morphology controlPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

複合材料ボルト継手のスマート化によるヘルスモニタリングPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Shimamura Yoshinobu 島村佳伸

島村佳伸シマムラヨシノブ

SHIMAMURA Yoshinobu 島村佳伸