AOKI Shigeru 青木繁

Researcher Number	90016436
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2004 – 2005: 東洋大学, 工学部, 教授 1995 – 2000: Tokyo Institute of Technology, Professor, 大学院・情報理工学研究科, 教授 1998: Graduate School of Information Science and Engineerng, Tokyo Institute of Techno, 大学院情報理工学研究科, 教授 1994: 東京工業大学, 大学院情報理工学研究科, 教授 1987 – 1992: Tokyo Institute of Technology, 工学部, 教授 1986: Tokyo Institute of Technology, Associate Professor, 工学部, 助教授 1986: 東京工業大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / 材料力学 / 機械材料工学 / Materials/Mechanics of materials Except Principal Investigator 材料力学 / Materials/Mechanics of materials
Keywords	Principal Investigator 逆解析 / 境界要素法 / Inverse Analysis / 分極特性 / カソード防食 / 分極曲線 / 最適化 / ラプラス方程式 / Inverse Problem / Optimization … More / 高速多重極境界要素法 / 鉄筋コンクリート / Polarization curve / Boundary element method / Cathodic protection / 領域分割法 / 複雑構造物 / 大規模問題 / 多重極境界要素法 / Polarization Curve / 境界要素解析 / Fuzzy Set / Cathodic Protection / カソ-ド防食 / 最適設計 / 動的応力拡大係数 / 逆問題解析 / 衝撃破壊靭性 / Newton-Laphson Method / Laplace Equation / Boundary Element Analysis / Galvanic Corrosion / 逆問題 / モニタリング / ニュートン・ラフソン法 / エキスパートシステム / 特異値分解法 / 悪条件の方程式 / カソ-ド防食の最適化 / 溶液の電導度 / 解の収束性 / 電流密度分布 / ガルバニック腐食 / Tough material / J-integral / Mixed mode elastic plastic fracture toughness test / Finite element analysis based on the finite deformation / Mixed mode loading / Ductile Fracture / J積分の適用限界 / 微小空孔の発生と成長 / き裂先端近傍の弾塑性応力変位場 / 予き裂の先鋭化と鈍化 / 全ストレッチゾーン長さ / 破壊進行領域 / アルミニウム合金 / ディンプル破壊 / せん断破壊 / 高靱性材料 / J積分 / 混合モード弾塑性破壊靱性試験 / 有限変形理論に基づく有限要素解析 / 混合モード荷重 / 延性破壊 / Detecting fracture initiation / Fracture under large scale yield condition / Simple method for estimating J-integral / High toughness material / Impact 3-point bend specimen / Dynamic fracture toughness / 高速き裂 / FFTアナライザによる衝撃力の計測 / 破壊開始の検出 / 落重式衝撃三点曲げ試験機 / 【J!^】積分の簡便評価法 / 動的破壊靭性値 / Magnetic Field Measurement / Net Structure / Impedance / Complex Electric Conductivity / Fast Multipole Boundary Flement Method / Corrosion Detection / Reinforced Concrete / 領域分割境界要素法 / 網目腐食特殊要素 / 境界要素逆解析 / 遺伝的アルゴリズム / 磁場計測 / 網目特殊要素 / インピーダンス / 複素電気伝導度 / 腐食検出 / Initial values / Pipe element / Complicated structure / Fast Multipole BEM (FMBEM) / Corrosion analysis / 腐食解析 / 非線形境界条件 / 初期値設定 / 最適実施条件 / 効率的最適化 / Non-destructive test / Corroded rebar / Concrete structure / Inverse analysis / Potential mapping method / AC impedance method / 精度向上 / 鉄筋腐食位置の同定 / 非破壊検査 / 複素インピーダンス / 鉄筋腐食の検出 / ポテンシャルマッピング法 / 交流インピーダンス法 / Optuimization / Fundamental solution / Gradient electrical conductivity / Corrosion / Structure buried in soil / 複雑な電気伝導度変化 / 長大構造物 / 複雑地盤 / 非軸対称パイプ要素 / 干渉 / 土壌腐食 / 反復計算 / パイプ要素 / 基本解 / ゆるやかに変化する電気伝導度 / 腐食 / 地中埋設構造物 / Impact Problems / Measurement Error / Split Hopkinson Bar test / Visco-Plastic Material / Elastic / Kalman Filter / Finite Element Method / Gurson's Material / 試験片形状 / ホプキンソン棒 / 空孔発生 / 有限変形弾塑性論 / ガ-ソン材特性値 / ひずみ速度依存性 / 衝撃問題 / 測定誤差 / スプリット・ホプキンソン棒試験 / 粘塑性体 / 弾 / カルマンフィルタ / 有限要素法 / ガ-ソン材 / Impact fracture / Molecular dynamics / Interfacial strength / Inhomogeneous material / Computational Mechanics / Mesoscopic / Damage / Fracture / 衝撃破壊 / 分子動力学 / 界面強度 / 不均質材料 / 計算機シミュレーション / メゾスコピック / 損傷 / 破壊 / Scanning Vibrating Electrode Technique / Ill-posedness / Effective Boundary Element Analysis / A priori Information / Set of Solutions / 測定プローブによる誤差 / 測定精度の向上 / 解析の階層化 / 特異値分解 / ファジ-集合 / Fuzzy集合 / 先験情報 / 悪条件の緩和 / 効率的解析手法 / 走査型振動電極法 / Identification of Paint Defect / Effective Method of Corrosion Analysis / Sensitivity Analysis / Boundary Element Method / Optimum Design / ポアソン方程式 / ペナルティ関数 / 共役勾配法 / 熱交換器 / 効率的3次元境界要素法 / ペイント欠陥の同定 / ファジー理論 / 効率的腐食解析 / 感度解析 / Caustics Method / Finite Element Simulation / Ceramic-Reinforced Metal / Ceramics / Simple Formula / One-Point Bend-Impact Tester / Linear Dynamic Fracture Mechanics / Impact Fracture Toughness / き裂面の接触力 / 動的有限要素解析 / アルミナ-ジルコニア複合材料 / アルミナ / 一点曲げ衝撃試験装置 / 衝撃破壊靭性K_<Id> / 高衝撃負荷速度 / 動的塑性域補正 / 有限要素シミュレ-ション / コ-スティックス法 / セラミックス強化金属 / セラミックス / 1点曲げ試験 / 動的破壊じん性 / 動的線形破壊力学 / き裂面接触力 / 縦衝撃試験 / 破壊開始時刻の検出 / 一点曲げ試験 / 構造用セラミックス / 高速き裂進展靭性 … More Except Principal Investigator J積分 / Dynamic Stress Intensity Factor / J-integral / 境界要素法 / 適切化手法 / 非破壊検査 / 逆問題 / Simple Formula / One-point-bend / Three-point-bend / Plastic Zone Correction / Impact Fracture Toughness / J[D4^]D4積分 / 曲げ試験 / 落重式衝撃試験 / 衝撃破壊靭値 / 簡便評価式 / 一点曲げ試験 / 三点曲げ試験 / 塑性域補正 / 動的応力拡大係数 / 衝撃破壊靱性 / Mixed Mode / Crystal Model / Void Volume Fraction / Gurson's Yield Function / Intense Strain Region / Process Zone / Slip line Theory / Large Deformation Analysis / Finite Element Method / Ductile Fracture / 有限要素法 / 空孔率 / 破壊進行域 / 混合モード破壊 / 塑性変形 / き裂 / ボイド率、混合モード / 楔形き裂開口 / 局所化 / 混合モード / ボイド率 / 結晶すべりモデル / ガーソンの降伏関数 / 強変形域 / プロセス・ゾーン / せん断破壊 / ディンプル破壊 / すべり線場 / 有限変形有限要素解析 / 延性破壊 / Impact Fracture Toughness One-Poine-Bend Specimen / Impact Test / Cetamics / 高温衝撃破壊靱性 / 部分安定ジルコニア / 窒化珪素 / 炭化珪素 / 簡便式 / 計測システム / 高温衝撃破壊靭性 / 動的破壊力学 / 構造用セラミックス / Degradation / Stress / Strain / Mechanics of Materials / Eddy Current / Magnetoacoustic Emission / Permeability / Resistivity / 劣化 / 応力 / ひずみ / 材料力学 / 渦電流 / 磁気AE / 透磁率 / 抵抗率 / Governing-Equation Identification / Boundary Element Method / Boundary Value Identification / Regularization / Force Identification / Crack Identification / Non-Destructive Inspection / Inverse Problems / 支配方程式同定 / 境界値同定 / 外力同定 / 欠陥・き裂同定 / Finite Element Analyses / Welded Materials / Near CrackーTip Parameters / Simple Estimation Scheme / Crack Growth Simulation / Inhomogeneous Materials and Structures / ElasticーPlastic Fracture Mechanics / 有限要素解析 / 溶接材料 / 近接経路積分 / 簡易評価法 / き裂進展解析 / 非均質構造材料 / 弾塑性破壊力学 / 特異値分解 / 破壊力学 / 数値計算 / 数理解析 Less

Effective Detection of Steel Corrosion in Concrete Structure and Optimal Design of Protection by Using Boundary Element MethodPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Toyo University
Optimization of cathodic protection for complicated structures using fast multipole boundary element method and equivalent boundary conditionPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of technology
A Combined method of AC Impedance Measurement and BE Inverse Analysis for Detecting Corroded Rebar in Concrete StructurePrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
固体力学における逆問題と逆解析手法の構造解明と適切化手法の確立に関する企画調査
- Principal Investigator
  
  KUBO Shiro
- Project Period (FY)
  1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Osaka University
Meso-Mechanical Aspects of Material Strength and FracturePrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for international Scientific Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Research on Highly Sensitive Measurement and Evaluation of Electromagnetic Properties and Quantities in Relation to Strain and Stress, and Materials Degradation
- Principal Investigator
  
  ABE Hiroyuki
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Identification of Gurson's Material Constants by Using Finite Deformation/Elastic Plastic Finite Element Method and Kalman FilterPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Institute of Technology
Development of Optimization System of Cathodic Protection for a Long Buried Structure by Boundory Element MethodPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Development of Corrosion Estimation System With Scanning Vibrating Electrode Technique by usint Boundary Element Inverse AnalysisPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
逆問題解析手法を利用した衝撃破壊靭性および高速き裂進展靭性の計測Principal Investigator
- Principal Investigator
  
  青木繁
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  Tokyo Institute of Technology
Optimization of Cathodic protection system by Boundary Element MethodPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械材料工学
- Research Institution
  Tokyo Institute of Technology
Proposal and Examination of Numerical-Experimental Hybrid Inversion Analysis Schemes Relevant to Potential Problems in Solid Mechanics
- Principal Investigator
  
  KUBO Shiro
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  材料力学
- Research Institution
  Osaka University
Study on Elastic ー Plastic Fracture Machanics in Nonhomogeneous Materials and Structures
- Principal Investigator
  
  YAGAWA Genki
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for international Scientific Research
- Research Institution
  The University of Tokyo
A Study on the Applicability of Dynamic Linear Fracture Mechanics and Its ExtensionPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  Tokyo Institute of Technology
Study on Simple Method to Measure the Dynamic Fracture Toughness of Ductile Material
- Principal Investigator
  
  KISHIMOTO Kikuo
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Development of an expert system for analyzing galvanic corrosion problems by using the Boundary Element MethodPrincipal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  機械材料工学
- Research Institution
  Tokyo Institute of Technology
Analytical Studies on Ductile Fracture Behavior Near the Crack-Tip
- Principal Investigator
  
  SAKATA Masaru
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  材料力学
- Research Institution
  Tokyo Institute of Technology
RESEARCH ON DUCTILE FRACTURE OF TOUGH MATERIAL UNDER MIXED MODE LOADINGPrincipal Investigator
- Principal Investigator
  
  AOKI SHIGERU
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Research on Dynamic Fracture Toughness for High Toughness Material ----Measuring Method and Property------Principal Investigator
- Principal Investigator
  
  AOKI Shigeru
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  Tokyo Institute of Technology
Development for Mesurment System on Impact Fracture Toughness of Ceramic Material at Elevated Temperature
- Principal Investigator
  
  SAKATA Masaru
- Project Period (FY)
  1985 – 1987
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  材料力学
- Research Institution
  Tokyo Institute of Technology

All 2005 2004 Other

All Journal Article

[Journal Article] Application of Fast Multipole Boundary Element Method to Corrosion Problems2005
- Author(s)
  S.AOKI, K.AMAYA, M.URAGO, A.NAKAYAMA
- Journal Title
  
  The 4th International Conference on Numerical Analysis in Engineering 2005, Yogyakarta, Indonesia
- NAID
  110002293667
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Boundary Element Simulation for Identification of SteelCorrosion in Concrete Usng Magnetic Field Measurement2005
- Author(s)
  M.Ridha, K.Amaya, S.Aoki
- Journal Title
  
  Corrosion(NACE) 61・8
  
  Pages: 784-791
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Optimum design of Cathodic protection using the Boundary Element Method2005
- Author(s)
  K.AMAYA, S.AOKI
- Journal Title
  
  Trans. WIT. Simulation of Electrochemical Processes, Engineering Sciences vo1.48
  
  Pages: 25-37
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Boundary Element Inverse Analysis for Determining the Complex Admittance of Concrete with Embedded Steel2005
- Author(s)
  M.RIDHA, S.AOKI, Y.SHIBUTYA, M.YOSHIDA, K.AMAYA
- Journal Title
  
  The 4th International Conference on Numerical Analysis in Engineering 2005, Yogyakarta, Indonesia
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Boundary Element Simulation for Identification of Steel Corrosion in Concrete Usng Magnetic Field Measurement2005
- Author(s)
  M.Ridha, K.Amaya, S.Aoki
- Journal Title
  
  Corrosion (NACE) Vol.61, No.8
  
  Pages: 789-791
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Aplication of BEM to Evaluate the Potential Mapping Technique for Corrosion Monitoring2005
- Author(s)
  M.Ridha, S.Aoki
- Journal Title
  
  Proceedings of the NationalSeminar on Computational and Experimental Mechanics (CEM) 2005
  
  Pages: 437-444
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Optimum design of Cathodic protection using the Boundary Element Method2005
- Author(s)
  K.Amaya, S.Aoki
- Journal Title
  
  Trans.WIT.Simulation of Electrochemical Processes, Engineering Sciences Vol.48
  
  Pages: 25-37
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Aplication of BEM to Evaluate the Potential Mapping Technique for Corrosion Monitoring2005
- Author(s)
  M.Ridha, S.Aoki
- Journal Title
  
  Proceedings of the NationalSeminar on Computational and Experimental Mechanics (CEM)2005
  
  Pages: 437-444
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Optimum design of Cathodic protection using the Boundary Elemen Method2005
- Author(s)
  K.AMAYA, S.AOKI
- Journal Title
  
  Trans. WIT. Simulation of Electrochemical Processes, Engineering Sciences Vol.48
  
  Pages: 25-37
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Boundary Element Simulation for Identification of Steel Corrosion in Concrete Usng Magnetic Field Measurement2005
- Author(s)
  M.RIDHA, K.AMAYA, S.AOKI
- Journal Title
  
  Corrosion 61・8
  
  Pages: 784-791
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Application of Genetic Algorithm to the Reinforced Concrete Corrosion Detection2004
- Author(s)
  M.Ridha, K.Amaya, S.Aoki
- Journal Title
  
  Proceedings of Indonesia-Japan Joint Scientific Symposium 2004 (IJJS'04)
  
  Pages: 375-380
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Potential Mapping Technique for Reinforced Concrete Corrosion Monitoring -Analysis some factors affecting its accuracy using BEM2004
- Author(s)
  M Ridha, S.Aoki
- Journal Title
  
  Proceeding of Indonesian Scientific Conference 2004.
  
  Pages: 230-239
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Fast Multipole Boundary Element Analysis of Corrosion Problems2004
- Author(s)
  S.Aoki, K.Amaya, M.Urago, A.Nakayama
- Journal Title
  
  Computer Modelling in Engineering and Sciences Vol.6, No.2
  
  Pages: 123-131
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Potential Mapping Technique for Reinforced Concrete Corrosion Monitoring-Analysis some factors affecting its accuracy using BEM2004
- Author(s)
  M Ridha, S.Aoki
- Journal Title
  
  Proceeding of Indonesian Scientific Conference 2004.
  
  Pages: 230-239
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Application of Genetic Algorithm to the Reinforced Concrete Corrosion Detection2004
- Author(s)
  M Ridha, K.Amaya, S.Aoki
- Journal Title
  
  Proceedings of Indonesia-Japan Joint Scientific Symposium 2004(IJJS'04)
  
  Pages: 375-380
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Fast Multipole Boundary Element Analysis of Corrosion Problems2004
- Author(s)
  S.Aoki, K.Amaya, M Urago, A.Nakayama
- Journal Title
  
  Computer Modelling in Engineering and Sciences 6-2
  
  Pages: 123-131
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Potential Mapping Technique for Reinforced Concrete Corrosion Monitoring - Analysis some factors affecting its accuracy using BEM2004
- Author(s)
  M.Ridha, S.Aoki
- Journal Title
  
  Proceeding of Indonesian Scientific Conference 2004
  
  Pages: 230-239
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Fast Multipole Boundary Element Analysis of Corrosion Problems2004
- Author(s)
  S.Aoki, K.Amaya, M Urago, A.Nakayama
- Journal Title
  
  Computer Modelling in Engineering and Sciences 6・2
  
  Pages: 123-131
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Boundary Element Inverse Analysis for Determining the Complex Admittance of Concrete with Embedded Steel
- Author(s)
  M.RIDHA, S.AOKI, Y.SHIBUYA, M.YOSHIDA, K.AMAYA
- Journal Title
  
  The 4^<th> International Conference on Numerical Analysis in Engineering 2005, Yogyakarta,lndonesia (印刷中)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Application of Fast multipole boundary Element Method to Corrosion Problems
- Author(s)
  S.Aoki, K.Amaya, M.Urago, A.Nakayama
- Journal Title
  
  Proceedings of the 4th International Conference on Numerical Analysis in Engineering 2005, Yogyakarta, Indonesia (to appear)
- NAID
  110002293667
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Boundary Element Inverse Analysis for Determining the Complex Admittance of Concrete with Embedded Steel
- Author(s)
  M.Ridha, S.Aoki, Y.Shibuya, M.Yoshida, K.Amaya
- Journal Title
  
  Proceedings of the 4th International Conference on Numerical Analysis in Engineering 2005, Yogyakarta, Indonesia (to appear)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560080
[Journal Article] Application of Fast Multipole Boundary Element Method to Corrosion Problems
- Author(s)
  S.AOKI, K.AMAYA, M.URAGO, A.NAKAYAMA
- Journal Title
  
  The 41~<th> International Conference on Numerical Analysis in Engineering 2005, Yogyakarta,lndonesia (印刷中)
- NAID
  110002293667
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560080

1. KISHIMOTO Kikuo (30111652)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
2. AMAYA Kenji (70251642)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
3. ABE Hiroyuki (00005266)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
4. MIYASAKA Matsuho

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
5. KUBO Shiro (20107139)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. KITAGAWA Hiroshi (30029095)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. SAKATA Masaru (90016296)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. YANG Wei

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. YAGAWA Genki (40011100)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. YOSHIMURA Shinobu (90201053)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. KANTO Yasuhiro (60177764)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. KIKUCHI Masanori (90107540)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. MIYAZAKI Noriyuki (10166150)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. NISHIOKA Toshihisa (60018067)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. NAKAGAKI Michihiko (90207720)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. HOMMA Hiroomi (70016583)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. MIYA Kenzo (30011191)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. KAGAWA Yukio (10019200)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. OHJI Kiyotsugu (20028939)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. TAKAGI Toshiyuki (20197065)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. SHIRATORI Masaki (60017986)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. SAKA Masumi (20158918)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. OHTANI Ryuichi (50025946)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. MATSUO Youtarou (70016608)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. OTSUKA Akio (60022993)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. MIYAMOTO Hiroshi (70010593)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. 田中博 (60155158)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. 山本昌宏 (50182647)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 磯祐介 (70203065)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 田中正隆 (40029319)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. ATLURI S. N.

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. HUTCHINSON J.

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. MAYFIELD M.

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. WILKOWSKI Gery.

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. UEDA Masakatsu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. BUI Huy Duong

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. KNAUSS Wolfgang

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
38. NISHIKAWA Akinobu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. HUY Duong BU

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
40. WEI YANG

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
41. WOLFGANG KNA

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
42. MAIGRE H.

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
43. RAVICHANDRAN ジー

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
44. ROSAKIS Ares

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
45. NAKAMURA Tos

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

AOKI Shigeru 青木 繁

Research Projects

Research Products

Co-Researchers

Effective Detection of Steel Corrosion in Concrete Structure and Optimal Design of Protection by Using Boundary Element MethodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optimization of cathodic protection for complicated structures using fast multipole boundary element method and equivalent boundary conditionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Combined method of AC Impedance Measurement and BE Inverse Analysis for Detecting Corroded Rebar in Concrete StructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

固体力学における逆問題と逆解析手法の構造解明と適切化手法の確立に関する企画調査

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Meso-Mechanical Aspects of Material Strength and FracturePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on Highly Sensitive Measurement and Evaluation of Electromagnetic Properties and Quantities in Relation to Strain and Stress, and Materials Degradation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Identification of Gurson's Material Constants by Using Finite Deformation/Elastic Plastic Finite Element Method and Kalman FilterPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Optimization System of Cathodic Protection for a Long Buried Structure by Boundory Element MethodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Corrosion Estimation System With Scanning Vibrating Electrode Technique by usint Boundary Element Inverse AnalysisPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

逆問題解析手法を利用した衝撃破壊靭性および高速き裂進展靭性の計測Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optimization of Cathodic protection system by Boundary Element MethodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Proposal and Examination of Numerical-Experimental Hybrid Inversion Analysis Schemes Relevant to Potential Problems in Solid Mechanics

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Elastic ー Plastic Fracture Machanics in Nonhomogeneous Materials and Structures

Principal Investigator

Project Period (FY)

Research Category

AOKI Shigeru 青木繁