Yoshioka Hayato 吉岡勇人

… Alternative Names

YOSHIOKA Hayato 吉岡勇人

Less

Researcher Number	90361758
Other IDs
External Links
Affiliation (Current)	2025: 東京大学, 生産技術研究所, 教授
Affiliation (based on the past Project Information) *help	2022 – 2024: 東京大学, 生産技術研究所, 教授 2015 – 2021: 東京工業大学, 科学技術創成研究院, 准教授 2013 – 2014: 東京工業大学, 理工学研究科, 准教授 2007 – 2013: 東京工業大学, 精密工学研究所, 准教授 2006: Precision and Intelligence Laboratory, Associate Professor, 精密工学研究所, 助教授 2003 – 2005: 東京工業大学, 精密工学研究所, 助手
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related Except Principal Investigator Production engineering/Processing studies / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields / 機械工作・生産工学
Keywords	Principal Investigator 精密位置決め / モニタリング / 高速工具サーボ / 超磁歪素子 / 工具 / 位置決め / 加工計測 / 超精密加工 / 加工力 / 振動 … More / プロセス制御 / 刃先位置決め / 主軸 / 接触検知 / 機械加工 / フライス加工 / 高能率加工 / パターニング / 精密加工 / 微細加工 / 機能性表面 / 微細パターン / 自由曲面 / 自己検知 / 切削加工 / 工作機械 / 回転主軸 / 工具サーボ / ダイヤモンド / 非接触 / 工作物 / エバネッセント光 / 接触状態 / 静圧軸受 / 空気静圧軸受 / 超精密位置決め / 回転テーブル / 電磁アクチュエータ / 空気圧アクチュエータ / ハイブリッド駆動 / 熱変形抑制 / 誤差要因 / レーザ計測 / サブナノメートル / リニアモータ / レーザ干渉計 / 超精密 / 加工制御 / 加工状態認識 / ナノ加工 / 切削温度 / マイクロセンサ / 能動制御 / インプロセス … More Except Principal Investigator 工作機械 / ナノ運動制御 / 超精密加工 / 生産工学 / Nano-motion control / ナノ計測 / 超微細加工 / ナノメートル位置決め / ナノ加工 / マザーマシン / モジュール型 / AGV / 生産ライン / フレキシブル / ダイナミックケイパビリティ / 生産システム / Mechanical engineering / Precision machine system / Production engineering / Machine tool / Machining system / Ultrafine machining / Ultraprecision machining / インプロセスモニタリング / ハイブリッド駆動機構 / 給気冷却 / エアタービン / 空気静圧スピンドル / 高速・超精密スピンドル / リニアモータ / 空気静圧案内 / 超精密スピンドル / 熱変形抑制 / インプロセスセンサ / 鉛直方向位置決め / 機械工学 / 精密機械システム / 加工システム / 複合加工 / ナノ制御 / 加工 / 生産 / 機械工作 / 精密加工 / 研究開発 / レーザ加工 / 位置決め機構 / 回転主軸 / 設計工学 / 超精密計測 / 精密部品加工 / 機械工作・生産工学 / エネルギー加工 / 機械加工 / 計測 / 生産加工 / 構造設計 / Probe / Measuring machine / Nano-geometry / Scanning Tunneling Microscopy / Three-dimensional profile / Nano-measuring / Nano-profiler / 原子間力 / トンネル電流 / プローブシステム / ナノ形状計測 / コンパクト構造 / 三次元計測 / 高安定構造 / ナノパターン / 多軸同時制御 / ナノ位置決め / 超精密加工システム / 微細形状創成 / ナノモーション制御 / ナノ加工特性 Less

Machining process control with active spindle equipped with positioning and sensing functionsPrincipal Investigator
- Principal Investigator
  
  吉岡勇人
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  The University of Tokyo
Machine tools based on inovation of design and informatics
- Principal Investigator
  
  Sugita Naohiko
- Project Period (FY)
  2019 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
- Research Institution
  The University of Tokyo
Realization of nano-structured free form surface and optimization of functional pattern on the surfacePrincipal Investigator
- Principal Investigator
  
  Yoshioka Hayato
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
An advanced integrated mother machine system(AIMS) and formulation of machine tool engineering based on the development process
- Principal Investigator
  
  Shinno Hidenori
- Project Period (FY)
  2012 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Development of fast tool servo system for milling processPrincipal Investigator
- Principal Investigator
  
  YOSHIOKA Hayato
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Direct monitoring of contact condition between tool and workpiecein ultraprecision cutting using evanescent lightPrincipal Investigator
- Principal Investigator
  
  YOSHIOKA Hayato
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Hybrid actuator-driven ultraprecision 2-DOF rotary table systemPrincipal Investigator
- Principal Investigator
  
  YOSHIOKA Hayato
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
A Newly Developed Compact Tree-Dimensional Profile Measuring System "Compact Nano-Profiler"
- Principal Investigator
  
  SHINNO Hidenori
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Development of a sub-nano positioning system with long stroke by minimizing error factors of the systemPrincipal Investigator
- Principal Investigator
  
  YOSHIOKA Hayato
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
A Newly Developed of Advanced Nano-pattern Generator with Large Work Area (ANGEL) and Investigation on the Nano-machinability
- Principal Investigator
  
  SHINNO Hidenori
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
センサ機能付加切削工具を用いた超精密切削加工の能動制御に関する研究Principal Investigator
- Principal Investigator
  
  吉岡勇人
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Development of Ultraprecision ＆ Ultrafine Machining System for Fabricating Nano-Devices
- Principal Investigator
  
  SHINNO Hidenori
- Project Period (FY)
  2002 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Institute of Technology

[Book] 磁性材料・部品の最新開発事例と応用技術2018
- Author(s)
  吉岡勇人（分担第６章第５節）
- Total Pages
  7
- Publisher
  技術情報協会
- Data Source
  KAKENHI-PROJECT-17H03153
[Book] 磁性材料・部品の最新開発事例と応用技術2018
- Author(s)
  吉岡勇人
- Total Pages
  7
- Publisher
  技術情報協会
- Data Source
  KAKENHI-PROJECT-24226004
[Book] 日刊工業新聞第２部：超精密加工における工具と工作物との相対距離の直接検知2018
- Author(s)
  吉岡勇人
- Total Pages
  2
- Publisher
  日刊工業新聞
- Data Source
  KAKENHI-PROJECT-24226004
[Book] 日本機械学会RC266次世代産業を牽引する工作機械に関する研究分科会研究報告書2016
- Author(s)
  新野秀憲，吉岡勇人
- Total Pages
  9
- Publisher
  一般社団法人　日本機械学会
- Data Source
  KAKENHI-PROJECT-24226004
[Book] ＪＳＭＥテキストシリーズ・機械工学総論（分担：3.3 材料加工）2012
- Author(s)
  新野秀憲，吉岡勇人
- Total Pages
  11
- Publisher
  日本機械学会
- Data Source
  KAKENHI-PROJECT-24226004
[Book] 日本機械学会RC216研究分科会成果報告書2006
- Author(s)
  吉岡勇人, 新野秀憲
- Total Pages
  250
- Publisher
  日本機械学会
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Book] Development and Performance Evaluation of Planar Nano- Motion Table System2006
- Author(s)
  Yoshioka, H., Shinno, H.
- Publisher
  JSME RC216 Research Report on Multiple-Axis Controlled Machine Tools and Their Utilizing Technologies(JSME)(in Japanese)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Machine-Learning-Based Model Parameter Identification for Cutting Force Estimation2024
- Author(s)
  Kouguchi Junichi、Tajima Shingo、Yoshioka Hayato
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 18 Issue: 1 Pages: 26-38
- DOI
  10.20965/ijat.2024.p0026
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2024-01-05
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H00735
[Journal Article] Monitoring method of cutting forces and vibrations by using frequency separation of acceleration sensor signals during milling process with small ball end mills2024
- Author(s)
  Kouguchi Junichi、Yoshioka Hayato
- Journal Title
  
  Precision Engineering
  
  Volume: 85 Pages: 337-356
- DOI
  10.1016/j.precisioneng.2023.10.013
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K26009
[Journal Article] Thermal error and energy-saving performance evaluation of the energy-saving machine tool using new structural materials2020
- Author(s)
  加藤慎，河野大輔，吉岡勇人，杉田直彦，浜口顕秀，高野和雅, 飯島一憲，柿沼康弘
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 86 Issue: 884 Pages: 20-00002-20-00002
- DOI
  10.1299/transjsme.20-00002
- NAID
  130007835949
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H00735
[Journal Article] Micro patterning on curved surface with a fast tool servo system for micro milling process2020
- Author(s)
  Hayato Yoshioka, Kotaro Kojima, Daisuke Toyota
- Journal Title
  
  CIRP Annals Manufacturing Technology
  
  Volume: 69
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03153
[Journal Article] A Newly Developed Zero-gravity Vertical Motion Mechanism for Precision Machining2017
- Author(s)
  Hayato YOSHIOKA, Hidenori SHINNO, Jiang ZHU, Manabu UCHIUMI
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 66-1 Issue: 1 Pages: 389-392
- DOI
  10.1016/j.cirp.2017.04.057
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] 微細パターン表面加工を目的とした回転工具サーボ2017
- Author(s)
  吉岡勇人，新野秀憲，田村勇樹
- Journal Title
  
  自動車技術
  
  Volume: 71‐6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] Determination of the zero-position for an optical angle sensor2016
- Author(s)
  Jun TAMADA, Yukitoshi KUDO, Yuan-Liu CHEN, Yuki SHIMIZU and Wei GAO
- Journal Title
  
  JAMDSM
  
  Volume: 10 Issue: 5 Pages: JAMDSM0072-JAMDSM0072
- DOI
  10.1299/jamdsm.2016jamdsm0072
- NAID
  130005266534
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15H05759, KAKENHI-PROJECT-24226004
[Journal Article] Rotary-axial Positioning System with Giant Magnetostrictive Element2016
- Author(s)
  Yuuki TAMURA, Hayato YOSHIOKA, Hidenori SHINNO
- Journal Title
  
  Procedia CIRP
  
  Volume: 46 Pages: 315-318
- DOI
  10.1016/j.procir.2016.03.137
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] 総論：流体軸受の現状と今後の展望2016
- Author(s)
  吉岡勇人
- Journal Title
  
  砥粒加工学学会誌
  
  Volume: 60-7 Pages: 358-361
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] On-Machine Surface Texture Measuring System Using Laser Speckle Pattern Analysis2016
- Author(s)
  Motochika Shimizu, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 10 Issue: 1 Pages: 69-77
- DOI
  10.20965/ijat.2016.p0069
- NAID
  130007673844
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2016-01-05
- Language
  English
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A low-profile planar motion table system driven by steel belt2015
- Author(s)
  Hayato Yoshioka, Hidenori Shinno, HIroshi Sawano
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 9-6 Pages: 739-745
- NAID
  130007673932
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] Nano-positioning system using self-sensing function of giant magnetostrictive actuator2015
- Author(s)
  田村勇樹，吉岡勇人，新野秀憲，澤野宏
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 81 Issue: 832 Pages: 15-00292-15-00292
- DOI
  10.1299/transjsme.15-00292
- NAID
  130005118088
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] High performance hydrostatic bearing using a variable inherent restrictor with a thin metal plate2015
- Author(s)
  Hiroshi Sawano, Yuske Nakamura, Hayato Yoshioka, Hidenori Shinno
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 41 Pages: 78-85
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] Surface texture assessment of ultra-precision machined parts based on laser speckle pattern analysis2014
- Author(s)
  Motochika Shimizu, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
- Journal Title
  
  Precision Engineering
  
  Volume: 38 Pages: 1-8
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] Monitoring of distance between diamond tool edge and workpiece surface in ultraprecision cutting using evanescent light2014
- Author(s)
  Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 63 Pages: 341-344
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A thermally stable aerostatic spindle system equipped with self-cooling function2014
- Author(s)
  Yuuki Tamura, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: 8-6 Pages: 1-10
- NAID
  130004948839
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] Magnetically preloaded aerostatic guideway for high speed nanometer positioning2014
- Author(s)
  Takumi Tsumura, Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufcturing
  
  Volume: 8-4 Pages: 1-11
- NAID
  130004705820
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A framework for systematizing machine tool engineering2013
- Author(s)
  Hidenori Shinno, Hayato Yoshioka, Hiroshi Sawano
- Journal Title
  
  Internationl Journal of Automation Technology
  
  Volume: 7-6 Pages: 760-768
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A newly developed rotary-linear motion platform with a giant magnetostrictive actuator2013
- Author(s)
  Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 62 Pages: 371-374
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A newly developed rotary-linear motion platform with a giant magnetostrictive actuator2013
- Author(s)
  Yoshioka, H., Shino H., Sawano, H.
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 62 Issue: 1 Pages: 371-374
- DOI
  10.1016/j.cirp.2013.03.137
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360052
[Journal Article] A Newly Developed STM-Based Coordinate Measuring Machine2012
- Author(s)
  H.Sawano, T.Gokan, H.Yoshioka, H.Shinno
- Journal Title
  
  Precision Engineering
  
  Volume: 36-4 Issue: 4 Pages: 538-545
- DOI
  10.1016/j.precisioneng.2012.02.007
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A Newly Developed Ripple Free Precision Toroidal Type Motor2012
- Author(s)
  H.Yoshioka, Y.Kurisaki, H.Sawano, H.Shinno
- Journal Title
  
  CIRP Annals – Manufacturing Technology
  
  Volume: 61-1 Issue: 1 Pages: 363-366
- DOI
  10.1016/j.cirp.2012.03.140
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24226004
[Journal Article] A Newly Developed Ripple-Free Precision Toroidal Type Motor2012
- Author(s)
  Hayato Yoshioka, Yugo Kurisaki, Hiroshi Sawano, Hidenori Shinno
- Journal Title
  
  CIRP Annals-Manufacturing Technology
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22686016
[Journal Article] Three-Dimensional Profile Measuring System with AFM Probe2011
- Author(s)
  綾田翔, 深野宏, 吉岡勇人, 新野秀憲
- Journal Title
  
  TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
  
  Volume: 77 Issue: 782 Pages: 3597-3607
- DOI
  10.1299/kikaic.77.3597
- NAID
  130001433445
- ISSN
  0387-5024, 1884-8354
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Newly Developed Long Range Positioning Table System with a Sub-Nanometer Resolution2011
- Author(s)
  Hidenori Shinno, Hayato Yoshioka, Hiroshi Sawano
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: Vol.60,No.1 Issue: 1 Pages: 403-406
- DOI
  10.1016/j.cirp.2011.03.027
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] On-Machine Optical Surface Profile Measuring System for Nano-Machining2011
- Author(s)
  Sawano Hiroshi, Takahashi Motohiro, Yoshioka Hayato, Shinno Hidenori, Mitsui Kimiyuki
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: Vol.5, No.3 Pages: 369-376
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] 精密機械システム用非接触構造アクティブ除振ユニット2011
- Author(s)
  清水一力, 澤野宏, 吉岡勇人, 新野秀憲
- Journal Title
  
  日本機械学会論文集
  
  Volume: Vol.77, No.782 Pages: 3572-3580
- NAID
  130001433442
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] On-Machine Optical Surface Profile Measuring System for Nano-Machining2011
- Author(s)
  Hiroshi Sawano, Motohiro Takahashi, Hayato Yoshioka, Hidenori Shinno, Kimiyuki Mitsui
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: Vol.5,No.3 Pages: 369-376
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] AFMプローブを用いた三次元形状計測システム2011
- Author(s)
  綾田翔, 澤野宏, 吉岡勇人, 新野秀憲
- Journal Title
  
  日本機械学会論文集
  
  Volume: Vol.77, No.782 Pages: 3597-3607
- NAID
  130001433445
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Developed Non-Contact Active Vibration Isolation Unit for Precision Machining Systems2011
- Author(s)
  清水一力, 深野宏, 吉岡勇人, 新野秀憲
- Journal Title
  
  TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
  
  Volume: 77 Issue: 782 Pages: 3572-3580
- DOI
  10.1299/kikaic.77.3572
- NAID
  130001433442
- ISSN
  0387-5024, 1884-8354
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] Three-Dimensional Nano-Motion System for SPM-Based CMM2010
- Author(s)
  H.Sawano, T.Gokan, H.Yoshioka, H.Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems and Manufacturing
  
  Volume: Vol.4, No.6 Pages: 1192-1200
- NAID
  130000428100
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Newly Developed Three-Dimensional Profile Scanner with Nanometer Spatial Resolution2010
- Author(s)
  Shinno Hidenori, Yoshioka Hayato, Gokan Toshimichi, Sawano Hiroshi
- Journal Title
  
  Cirp Annals-Manufacturing Technology
  
  Volume: Vol.59, No.1 Pages: 525-528
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Range2010
- Author(s)
  Kurisaki Yugo, Sawano Hiroshi, Yoshioka Hayato, Shinno Hidenori
- Journal Title
  
  Journal of Advanced Mechanical Design Systems and Manufacturing
  
  Volume: Vol.4, No.5 Pages: 976-984
- NAID
  130000335371
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Newly Developed Long Range Positioning Table System with a Sub-Nanometer Resolution2010
- Author(s)
  Shinno Hidenori, Yoshioka Hayato, Sawano Hiroshi
- Journal Title
  
  Cirp Annals. Manufacturing Technology
  
  Volume: Vol.4, No.6 Pages: 1192-1200
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] Three-Dimensional Nano-Motion System for SPM-Based CMM, Journal of Advanced Mechanical Design2010
- Author(s)
  Sawano Hiroshi, Gokan Toshimichi, Yoshioka Hayato, Shinno Hiden
- Journal Title
  
  Systems and Manufacturing
  
  Volume: Vol.4, No.6 Pages: 1192-1200
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Range2010
- Author(s)
  Y.Kurisaki, H.Sawano, H.Yoshioka, H.Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems and Manufacturing
  
  Volume: Vol.4. No.5 Pages: 976-984
- NAID
  130000335371
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] A Newly Developed Three-Dimensional Profile Scanner with Nanometer Spatial Resolution2010
- Author(s)
  H.Shinno, H.Yoshioka, T.Gokan, H.Sawano
- Journal Title
  
  CIRP(International Academy for Production Engineering) Annals-Manufacturing Technology
  
  Volume: Vol.59, No.1 Pages: 525-528
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] 特集未来技術【超精密加工機"ANGEL"】.2009
- Author(s)
  新野秀憲, 吉岡勇人.
- Journal Title
  
  生産財マーケティング 46
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A High Performance Tilting Platform Driven by Hybrid Actuator2009
- Author(s)
  Shinno, H., Yoshioka, H., Hayashi, M.
- Journal Title
  
  Cirp Annals-Manufacturing Technology (Annals of the International Academy for Production Engineering) 58/1
  
  Pages: 363-366
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] 超精密加工機「a ngel」の特徴と今後の展開2009
- Author(s)
  吉岡勇人, 新野秀憲
- Journal Title
  
  型技術 v24,n4
  
  Pages: 103-106
- Data Source
  KAKENHI-PROJECT-20686011
[Journal Article] A High Performance Tilting Platform Driven by Hybrid Actuator2009
- Author(s)
  Hidenori SHINNO, Hatato YOSHIOKA, Mamoru HAYASHI
- Journal Title
  
  Annals of the CIRP(Annals of the International Academy for Production Engineering) Vol.58 No.1
  
  Pages: 363-366
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 超精密加工機「ANGEL」の特徴と今後の展開2009
- Author(s)
  吉岡勇人, 新野秀憲
- Journal Title
  
  型技術 24
  
  Pages: 103-106
- NAID
  40016576140
- Data Source
  KAKENHI-PROJECT-20686011
[Journal Article] 特集未来技術【超精密加工機"ANGEL"】2009
- Author(s)
  新野秀憲, 吉岡勇人
- Journal Title
  
  生産財マーケティン Vol.46
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] マイクロ温度センサを用いた超精密切削加工の適応制御2009
- Author(s)
  吉岡勇人
- Journal Title
  
  日本機械学会誌 Vol.112
  
  Pages: 143-143
- NAID
  110007081493
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 超精密加工機「ANGEL」の特徴と今後の展開2009
- Author(s)
  吉岡勇人, 新野秀憲
- Journal Title
  
  型技術 24
  
  Pages: 103-106
- NAID
  40016576140
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] マイクロ温度センサを用いた超精密切削加工の適応制御2009
- Author(s)
  吉岡勇人
- Journal Title
  
  日本機械学会誌 112
  
  Pages: 143-143
- NAID
  110007081493
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A High Performance Tilting Platform Driven by Hybrid Actuator2009
- Author(s)
  Shinno Hidenori, Yoshioka Hayato, Hayashi Mamoru
- Journal Title
  
  Cirp Annals. Manufacturing Technology
  
  Volume: Vol.58, No.1 Pages: 363-366
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246026
[Journal Article] 超精密加工機「ANGEL」の特徴と今後の展開2009
- Author(s)
  吉岡勇人, 新野秀憲
- Journal Title
  
  型技術 Vol.24
  
  Pages: 103-106
- NAID
  40016576140
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A Newly Developed Long Stroke Vertical Nano-Motion Platform with Gravity Compensation2008
- Author(s)
  M. Takahashi, H. Yoshioka, H. Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.2
  
  Pages: 356-365
- NAID
  130000080808
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A Newly Developed Long-Stroke Vertical Nano-Motion Platform with Gravity Compensator, Journal of Advanced Mechanical Design2008
- Author(s)
  Takahashi, M., Yoshioka, H., Shinno, H.
- Journal Title
  
  Systems, and Manufacturing Vol.2,No.3
  
  Pages: 356-365
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20686011
[Journal Article] An Adaptive Control of Ultraprecision Machining with an In-Process Micro- Sensor2008
- Author(s)
  M. Hayashi, H. Yoshioka, H. Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.2
  
  Pages: 322-331
- NAID
  130000080810
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] Design and Nanomotion Control of a Noncontact Stage with Squeeze Bearings2008
- Author(s)
  Hayato YOSHIOKA, Toshimichi GOKAN, Hidenori SHINNO
- Journal Title
  
  International Journal of Automation Technology Vol.2
  
  Pages: 18-23
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] Design and Nanomotion Control of a Noncontact Stage with Squeeze Bearings2008
- Author(s)
  Hayato YOSHIOKA, Toshimichi GOKAN, Hidenori SHINNO
- Journal Title
  
  International Journal of Automation Techonology 2
  
  Pages: 18-23
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 完全非接触XY平面位置決めテーブルを用いた微細加工2008
- Author(s)
  吉岡勇人
- Journal Title
  
  日本機械学会誌 Vol.111,No.1071
  
  Pages: 129-129
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20686011
[Journal Article] A Newly Developed Long Stroke Vertical Nano-Motion Platform with Gravity Compensation2008
- Author(s)
  M. Takahashi, H. Yoshioka, H. Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing 2
  
  Pages: 356-365
- NAID
  130000080808
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A Newly Developed Long Stroke Vertical Nano-Motion Platform with Gravity Compensation2008
- Author(s)
  M. Takahashi, H. Yoshioka, H. Shinno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems. and Manufacturing 2
  
  Pages: 356-365
- NAID
  130000080808
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20686011
[Journal Article] 集束イオンビームによる硬ぜい性材料のナノ加工に関する研究2008
- Author(s)
  高橋信彦, 吉岡勇人, 新野秀憲
- Journal Title
  
  精密工学会誌 Vol.74
  
  Pages: 491-497
- NAID
  110006668362
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor2008
- Author(s)
  M. Hayashi, H. Yoshioka, H. Shnno
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing 2
  
  Pages: 322-331
- NAID
  130000080810
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 集束イオンビームによる硬ぜい性材料のナノ加工に関する研究2008
- Author(s)
  高橋信彦, 吉岡勇人よ新野秀憲
- Journal Title
  
  精密工学会誌 74
  
  Pages: 491-497
- NAID
  110006668362
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 完全非接触XY平面位置決めテーブルを用いた微細加工2008
- Author(s)
  吉岡勇人
- Journal Title
  
  日本機械学会誌 111
  
  Pages: 129-129
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 完全非接触XY平面位置決めテーブルを用いた微細加工2008
- Author(s)
  吉岡勇人
- Journal Title
  
  日本機械学会誌 Vol.111
  
  Pages: 129-129
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 超精密加工機のハードウエア技術2007
- Author(s)
  新野秀憲, 吉岡勇人
- Journal Title
  
  機械の研究 60
  
  Pages: 67-72
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining2007
- Author(s)
  Hidenori SHINNO, Hayato YOSHIOKA, Koichi TANIGUCHI
- Journal Title
  
  Annals of the CIRP(Annals of the International Academy for Production Engineering) Vol.56, No.1
  
  Pages: 369-327
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 超精密加工機のハードウエア技術2007
- Author(s)
  新野秀憲, 吉岡勇人
- Journal Title
  
  機械の研究 Vol.60
  
  Pages: 67-72
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] 超精密・微細加工を実現するためのフルードパワーシステム2007
- Author(s)
  新野秀憲, 吉岡勇人
- Journal Title
  
  日本フルードパワーシステム学会論文集 Vol38, No.2
  
  Pages: 68-72
- NAID
  10024323422
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Vertical Positioning System Equipped with Gravity Compensator2007
- Author(s)
  Yoshioka, H., Shinno, H.
- Journal Title
  
  (to be applied)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining2007
- Author(s)
  Hidenori SHINNO, Hayato YOSHIOKA, Koichi TANIGUCHI
- Journal Title
  
  Annals of the CIRP (Annals of the International Academy for Production Engineering) 56
  
  Pages: 369-372
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] Fluid Power System for Realizing Ultraprecision and Ultrafine Machining System2007
- Author(s)
  Shinno, H., Yoshioka, H.
- Journal Title
  
  Journal of the Japan Fluid Power System Society Vol.38, No.2
  
  Pages: 68-72
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining2007
- Author(s)
  Shinno, H., Yoshioka, H., Taniguchi, K.
- Journal Title
  
  Annals of the CIRP(Annals of the International Academy for Production Engineering) Vo1.56, No.1
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining2007
- Author(s)
  H.Shinno, H.Yoshioka, K.Taniguchi
- Journal Title
  
  Annals of the CIRP (Annals of the International Academy for Production Engineering) Vol.56, No.1(掲載決定済み)(印刷中)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 油空圧機器と超精密加工技術=流体制御技術の適用による3次元ナノ加工の実現=2007
- Author(s)
  新野秀憲, 吉岡勇人
- Journal Title
  
  油空圧技術 47
  
  Pages: 1-6
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining2007
- Author(s)
  H.Shinno, H.Yoshioka, K.Taniguchi
- Journal Title
  
  Annals of the CIRP (Annals of the International Acadymy for Production Engineering) Vol.56, No.1(掲載決定済み、印刷中)
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 油空圧機器と超精密加工技術-流体制御技術の適用による3次元ナノ加工の実現-2007
- Author(s)
  新野秀憲, 吉岡勇人
- Journal Title
  
  油空圧技術 Vol.47
  
  Pages: 1-6
- Data Source
  KAKENHI-PROJECT-19206017
[Journal Article] Develppment of Ultraprecision Leviation Table System Driven by Linear Motor2006
- Author(s)
  Gokan, T.Yoshioka, H., Shinno, H.
- Journal Title
  
  Proceedings of the 6^<th> Manufacturing ＆ Machine Tool Conference (in Japanese) No.06-34
  
  Pages: 151-152
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Quantitative SWOT Analysis on Global Competitiveness of Machine Tool Industry2006
- Author(s)
  H.Shinno, H.Yoshioka, S.Marpaung, S.Hachiga
- Journal Title
  
  Journal of Engineering Design Vol. 17, No. 4
  
  Pages: 251-258
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Quantitative SWOT Analysis on Global Competitiveness of Machine Tool Industry2006
- Author(s)
  H.Shinno, H.Yoshioka, S.Marpaung, S.Hachiga
- Journal Title
  
  Journal of Engineering Design Vol.17, No.4
  
  Pages: 251-258
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Structured Method for Analyzing Product Specification in Product Planning for Machine Tools2006
- Author(s)
  H.Shinno, H.Yoshioka, S.Marpaung
- Journal Title
  
  Journal of Engineering Design Vol. 17, No. 3
  
  Pages: 347-356
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Air Turbine Driven Aerostatic Spindle System for Nano-Processing2006
- Author(s)
  Yoshioka, H., Hirabayashi, T., Shinno, H.
- Journal Title
  
  New Technologies of Machine Tool and Manufacturing-Abstract of Production Engineering Researchers, Joint Event of the 12^<th> International Machine Tool Engineers Conference(JMTBA)
  
  Pages: 52-53
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 超音波振動を用いた非接触ナノ位置決めテーブルシステム2006
- Author(s)
  吉岡勇人, 新野秀憲
- Journal Title
  
  超音波テクノ(Ultrasonic Technology) Vol. 18 No. 3
  
  Pages: 48-51
- NAID
  130004657205
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Non-Contact Type Nano-Positioning Table System Using Ultrasonic Vibration2006
- Author(s)
  Yoshioka, H., Shinno, H.
- Journal Title
  
  Ultrasonic Technology (in Japanese) Vol.18, No.3
  
  Pages: 48-51
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Develppment of an Ultraprecision Planar Positioning Table System with a Belt Drive Machanism2006
- Author(s)
  Arima, H., Yoshioka, H., Shinno, H.
- Journal Title
  
  Proceedings of the 6th Manufacturing ＆ Machine Tool Conference (in Japanese) No.06-34
  
  Pages: 153-154
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Novel Linear Motor Driven Aerostatic Planar Positioning Table System for Nano-Machining2006
- Author(s)
  H.Yoshioka, K.Taniguchi, H.Shinno
- Journal Title
  
  Proceeding of the 6^<th> euspen International Conference
  
  Pages: 305-308
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air2006
- Author(s)
  H.Yoshioka, S.Matsumura, H.Hashizume, H.Shinno
- Journal Title
  
  JSME International Journal, Series C Vol.49, No.2
  
  Pages: 606-611
- NAID
  110004728881
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Structured Method for Analysing Product Specification in Product Planning for Machine Tools2006
- Author(s)
  Shinno, H., Yoshioka, H., Marpaung, W.
- Journal Title
  
  Journal of Engineering Design Vol.17, No.4
  
  Pages: 347-356
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Novel Linear Motor Driven Aerostatic Planar Positioning Table System for Nano-Machining2006
- Author(s)
  Yoshioka, H., Taniguchi.K., Shinno, H.
- Journal Title
  
  Proceedings of the 6^<th> euspen International Conference(Baden bei Wien)
  
  Pages: 305-308
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] X-Y Planar Positioning Table System for Nano-Processing, New Technologies of Machine Tool and Manufacturing-Abstract of Production Engineering Researchers, Joint Event of the 12^<th> International Machine Tool Engineers Conference2006
- Author(s)
  Yoshioka, H., Ono, Y., Shinno, H.
- Journal Title
  
  JMTBA
  
  Pages: 54-55
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Novel Linear Motor Driven Aerostatic Planar Positioning Table System for Nano-Machining2006
- Author(s)
  H.Yoshioka, K.Taniguchi, H.Shinno
- Journal Title
  
  Proceeding of the 6^t^h euspen International Conference
  
  Pages: 305-308
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Structured Method for Analyzing Product Specification in Product Planning for Machine Tools2006
- Author(s)
  H.Shinno, H.Yoshioka, S.Marpaung
- Journal Title
  
  Journal of Engineering Design Vol.17, No.3
  
  Pages: 347-356
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air2006
- Author(s)
  Yoshioka, H., Matsumura, S., Hashizume, H., SHINNO, H.
- Journal Title
  
  JSME International Journal, Series C Vol.49, No.2
  
  Pages: 606-611
- NAID
  110004728881
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] ベルト駆動X-Y精密位置決めテーブルシステム2006
- Author(s)
  有馬洋, 吉岡勇人, 新野秀憲
- Journal Title
  
  日本機械学会第6回生産加工・工作機械部門講演会 06-34
  
  Pages: 153-154
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Minimizing Thermal Deformation of Aerostatic Spindle System by Temperature Control of Supply Air2006
- Author(s)
  Hayato YOSHIOKA, Shimpei MATSUMURA, Hitoshi HASHIZUME, Hidenori SHINNO
- Journal Title
  
  JSME International Journal. Series C Vol.49, No.2
  
  Pages: 606-611
- NAID
  110004728881
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] リニアモータ駆動超音波浮上テーブルシステムの開発2006
- Author(s)
  後閑利通, 吉岡勇人, 新野秀憲
- Journal Title
  
  日本機械学会第6回生産加工・工作機械部門講演会 06-34
  
  Pages: 151-152
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Quantitative SWOT Analysis on Global Competitiveness of Machine Tool Industry2006
- Author(s)
  Shinno, H., Yoshioka, H., Marpaung, S., Hachiga, S.
- Journal Title
  
  Journal of Engineering Design Vol.17, No.3
  
  Pages: 251-258
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Developed Ultraprecision Air Spindle System for Nano-machining2005
- Author(s)
  Yoshioka, H., Okubo, M., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the ASPE 2005 Annual Meeting Vol.37
  
  Pages: 126-129
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] マイクロセンサ搭載工具によるナノ加工2005
- Author(s)
  松下幸生, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  日本機械学会関東支部・精密工学会共催山梨講演会
  
  Pages: 113-114
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 超微細加工プロセス用完全非接触XY運動テーブルシステムの開発2005
- Author(s)
  谷口浩一, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  2005年度精密工学会秋季大会,学術講演会講演論文集
  
  Pages: 43-44
- NAID
  130004656967
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] XY Planar Positioning Table System for Nano-Machining2005
- Author(s)
  H.Yoshioka, Y.Ono, H.Shinno
- Journal Title
  
  New Technologies of Machine Tool and Manufacturing, Joint Event of the 12^<th> International Machine Tool Engineers Conference
  
  Pages: 54-55
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] コンパクト構造ナノ位置決めテーブルシステムの開発2005
- Author(s)
  栗山健太郎, 石上雄三, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  2005年度精密工学会秋季大会講演論文集
  
  Pages: 873-874
- NAID
  130004657213
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Analysis on Nano-machinability in Ultraprecision Machining of Brittle Materials2005
- Author(s)
  Yoshioka, H., Hayakawa, T., Shinno, H.
- Journal Title
  
  Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya Vol.3
  
  Pages: 1133-1138
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] マイクロセンサ搭載工具によるナノ加工2005
- Author(s)
  松下幸生, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  日本機械学会関東支部・精密工学会共催山梨講演会講演論文集
  
  Pages: 113-114
- Data Source
  KAKENHI-PROJECT-17760101
[Journal Article] A Developed Ultraprecision Air Spindle System for Nano-Machining2005
- Author(s)
  Yoshioka, H., Okubo.M., Hashizume, H., Shinno, H.
- Journal Title
  
  ASPE 20^<th> Annual Meeting, Proceedings of the ASPE 2005 Annual Meeting Vol.37
  
  Pages: 126-129
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Development of Perfect Non-Contact Type X-Y Motion Table System for Ultrafine Machining2005
- Author(s)
  Taniguchi, K., Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSPE Autumn Annual Meeting (in Japanese)
  
  Pages: 43-44
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Non-Contact Type Nano-Positioning Table System Using Ultrasonic Vibration2005
- Author(s)
  Takahashi, M., Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSPE Autumn Annual Meeting (in Japanese)
  
  Pages: 859-860
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Development of Thermal Deformation Minimized High Speed spindle System2005
- Author(s)
  Marpaung, S., Ohkubo., M., Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSPE Autumn Annual Meeting (in Japanese)
  
  Pages: 31-32
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Air Turbine Driven Aerostatic Spindle System for Nano-Processing2005
- Author(s)
  H.Yoshioka, T.Hirabayashi, H.Shinno
- Journal Title
  
  New Technologies of Machine Tool and Manufacturing, Joint Event of the 12^<th> International Machine Tool Engineers Conference
  
  Pages: 52-53
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] ナノ加工用熱変形抑制高速回転主軸の開発2005
- Author(s)
  MARPAUNG Sihar, 大久保麻友, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  2005年度精密工学会秋季大会,学術講演会講演論文集
  
  Pages: 31-32
- NAID
  130004656901
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Analysis on Nano-Machinability in Ultraprecision Machining of Brittle Materials2005
- Author(s)
  Yoshioka, H., Hayakawa, T., Shinno, H.
- Journal Title
  
  Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya Vol.3
  
  Pages: 1133-1138
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Development of a Compact Nano- Positioning Table System2005
- Author(s)
  Kuriyama, K., Ishigami, Y., Yoshioka, H.Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSPE Autumn Annual Meeting (in Japanese)
  
  Pages: 873-874
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Developed Ultraprecision Air Spindle System for Nano-Machining2005
- Author(s)
  Yoshioka, H., Okubo, M., Hashizume, H., Shinno,H.
- Journal Title
  
  Proceedings of the ASPE 2005 Annual Meeting Vol. 37
  
  Pages: 126-129
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Nano-Machining Using a Tool with Microsensor2005
- Author(s)
  Matsushita, Y., Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSME Yamanashi District Conference (in Japanese)
  
  Pages: 113-114
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 超音波振動を用いた非接触ナノ位置決めテーブルシステム2005
- Author(s)
  高橋宗大, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  2005年度精密工学会秋季大会講演論文集
  
  Pages: 859-860
- NAID
  130004657205
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Analysis on Nano-Machinability in Ultraprecision Machining of Brittle Materials2005
- Author(s)
  Yoshioka, H., Hayakawa, H., Shinno, H.
- Journal Title
  
  The 3^<rd> International Conference on Leading Edge Manufacturing in 21^<th> Century(The Japan Society of Mechanical Engineers) Vol.3
  
  Pages: 1133-1138
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 給気温度制御による空気静圧主軸の熱変形抑制2004
- Author(s)
  吉岡勇人, 松村晋平, 橋詰等, 新野秀憲
- Journal Title
  
  日本機械学会論文集(C編) 70-700
  
  Pages: 3605-3610
- NAID
  110006264191
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] X-Y-θ Nano-Positioning Table System for a Mother Machine2004
- Author(s)
  Shinno, H., Hashizume, H., Yoshioka, H., Shinshi, T., Sato, K.
- Journal Title
  
  Annals of the CIRP(Annals of the International Institution for Production Engineering Research) Vol.53, No.1
  
  Pages: 337-340
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] X-Y-θ Nano-Positioning Table System for a Mother Machine2004
- Author(s)
  H.Shinno, H.Hashizume, H.Yoshioka, K.Komatsu, T.Shinshi, K.Sato
- Journal Title
  
  Annals of the CIRP 53/1
  
  Pages: 64-67
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] In-Process Microsensor for Ultraprecision Machining2004
- Author(s)
  Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  IEE Proceedings-Science, Measurement and Technology Vol.151, No.2
  
  Pages: 121-125
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] In-Process Micro- S ensor for Ultraprecision Machining2004
- Author(s)
  H.Yoshioka, H.Hashizume, H.Shinno
- Journal Title
  
  IEE Proceedings - Science, Measurement and Technology 151-2
  
  Pages: 121-125
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] XY Nano-Positioning Table System2004
- Author(s)
  Hashizume, H., Komatsu, K., Yoshioka, H., Shinno, H., Shinshi, T., Sato, K.
- Journal Title
  
  Proceedings of the JSME Annual Meeting in 2004 (in Japanese) Vol.4
  
  Pages: 63-64
- NAID
  110004055965
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] マイクロサーモパイルによる超精密切削加工の状態モニタリング2004
- Author(s)
  吉岡勇人, 平間宣孝, 橋詰等, 新野秀憲
- Journal Title
  
  日本機械学会2004年度年次大会講演論文集 4
  
  Pages: 297-298
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] ナノ加工システム用超精密XY位置決めテーブル2004
- Author(s)
  吉岡勇人, 橋詰等, 新野秀憲, 進士忠彦, 佐藤海二
- Journal Title
  
  第5回日本機械学会生産加工・工作機械部門講演会講演論文集
  
  Pages: 103-104
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] XYナノ位置決めテーブルシステム2004
- Author(s)
  橋詰等, 小松航, 吉岡勇人, 新野秀憲, 進士忠彦, 佐藤海二
- Journal Title
  
  日本機械学会2004年度年次大会講演論文集 4
  
  Pages: 63-64
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Ultraprecision X-Y Positioning Table System for Nano-Machining, Proceedings of the 5^<th> Manufacturing ＆ Machine Tool Conference2004
- Author(s)
  Yoshioka, H., Hashizume, H.Shinno, H., Shinshi, T., Sato, K.
- Journal Title
  
  JSME (in Japanese)
  
  Pages: 103-104
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Planar Nano-Positioning Table System for Advanced Machine Tools2004
- Author(s)
  H.Yoshioka, K.Komatsu, H.Hashizume, H.Shinno, T.Shinshi, K.Sato
- Journal Title
  
  Proceedings of the ASPE 2004 Annual Conference 34
  
  Pages: 64-67
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] A Planar Motion Nano- Positioning Table System for Advanced Machine Tools2004
- Author(s)
  Yoshioka, H., Komatsu, K., Hashizume, H., Shinno, H., Shinshi, T., Sato, K.
- Journal Title
  
  Proceedings of the Nineteenth Annual Meeting of ASPE Vol.34
  
  Pages: 64-67
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Thermal Deformation Control of Aerostatic Spindle System Using Temperature Controlled Supply Air2004
- Author(s)
  Yoshioka, H., Matsumura, S., Hashizume, H., Shinno, H.
- Journal Title
  
  Transactions of the JSME : C (in Japanese) Vol.70, No.700
  
  Pages: 3605-3610
- NAID
  110006264191
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Ultraprecision Machining Status Monitoring Using Micro Termopile2004
- Author(s)
  Yoshioka, H., Hirama, N., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSME Annual Meeting in 2004 (in Japanese) Vol.4
  
  Pages: 297-298
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] X-Y-θ Nano-Positioning Table System for a Mother Machine2004
- Author(s)
  H.Shinno, H.Hashizume, H.Yoshioka, K.Komatsu, T.Shinshi, K.Sato
- Journal Title
  
  Annals of the CIRP(Annals of the International Institution for Production Engineering Research) 53/1
  
  Pages: 64-67
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 給気温度制御による空気静圧主軸の熱変形抑制2003
- Author(s)
  松村晋平, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  2003年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 153-153
- NAID
  110006264191
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Control of Thermal Deformation of Aerostatic Spindle System Using Temperature control of Supply Air2003
- Author(s)
  Matsumura, S., Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSPE Autumn Annual Meeting in 2003 (in Japanese)
  
  Pages: 153-153
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] ボイスコイルモータを用いた粗微動位置決め2003
- Author(s)
  下田寛, 吉岡勇人, 橋詰等, 新野秀憲
- Journal Title
  
  2003年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 423-423
- NAID
  130005026802
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Sensor-Less Monitoring of Cutting Force During Ultraprecision Machining2003
- Author(s)
  H.Shinno, H.Hashizume, H.Yoshioka
- Journal Title
  
  Annals of the CIRP(Annals of the International Institution for Production Engineering Research) 52/1
  
  Pages: 303-306
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Sensor-Less Monitoring of Cutting Force during Ultraprecision Machining2003
- Author(s)
  Shinno, H., Hashzume, H., Yoshioka, H.
- Journal Title
  
  Annals of the CIRP(Annals of the International Institution for Production Engineering Research) Vol.52, No.1
  
  Pages: 303-306
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Coarse and Fine Table Positioning Using Voice Coil Motor2003
- Author(s)
  Shimoda, H., Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the JSPE Autumn annual Meeting in 2003 (in Japanese)
  
  Pages: 423-423
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] In-Process Status Monitoring of Ultraprecision Cutting Using a Disturbance Observer2002
- Author(s)
  Yoshioka, H., Hashizume, H., Shinno, H.
- Journal Title
  
  Proceedings of the 6^<th> International Conference on Mechatronics Technology
  
  Pages: 47-51
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] In-Process Status Monitoring of Ultraprecision Cutting Using a Disturbance Observer2002
- Author(s)
  H.Yoshioka, H.Hashizume, H.Shinno
- Journal Title
  
  Proceedings of the 6th International Conference on Mechatronics Technology
  
  Pages: 47-51
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Product Development Methodology for Machine Tools -Usability Analysis of Man-Machine Interface2002
- Author(s)
  H.Shinno, H.Hashizume, H.Yoshioka, K.Itoh
- Journal Title
  
  JSME International Journal, Series C Vol. 45 No. 3
  
  Pages: 815-820
- NAID
  110002386042
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] An In-Process Micro-Sensor for Ultraprecision Machining2002
- Author(s)
  H.Hashizume, H.Yoshioka, H.Shinno
- Journal Title
  
  Proceedings of the 3rd euspen International Conference
  
  Pages: 729-732
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] An In-Process Micro-Sensor for Ultraprecision Machining2002
- Author(s)
  Hashizume, H., Yoshioka, H., Shinno, H.
- Journal Title
  
  Proceedings of the 3^<rd> euspen International Conference(Eindhoven)(The Netherlands)
  
  Pages: 729-732
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Product Development Methodology for Machine Tools- A Structured Method for Identifying the Success Factors in New Product Development2002
- Author(s)
  Shinno, H., Hashizume, H., Yoshioka, H.
- Journal Title
  
  Transactions of the Japan society of Mechanical Engineers (in Japanese) Vo.68, No.671
  
  Pages: 3092-3099
- NAID
  110002378604
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] Product Development Methodology for Machine Tools (Usability Analysis of Man-Machine Interface)2002
- Author(s)
  Shinno, H., Hashizume, H., Yoshioka, H., Itoh, K.
- Journal Title
  
  JSME International Journal, Series C Vol.45, No.3
  
  Pages: 815-820
- NAID
  110002386042
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Journal Article] 工作機械の製品開発方法論(新製品の開発における成功要因の構造化手法)2002
- Author(s)
  新野秀憲, 橋詰等, 吉岡勇人, 八賀聡一
- Journal Title
  
  日本機械学会論文集(C編) Vol. 68 No. 671
  
  Pages: 3092-3099
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Patent] ロータリアクチュエータ2009
- Inventor(s)
  吉岡勇人, 新野秀憲, 林遵
- Industrial Property Rights Holder
  東京工業大学
- Industrial Property Number
  2009-042043
- Filing Date
  2009-02-25
- Data Source
  KAKENHI-PROJECT-19206017
[Patent] 重力補償機構及びそれを用いる鉛直方向位置決め装置2007
- Inventor(s)
  吉岡勇人, 新野秀憲
- Industrial Property Rights Holder
  東京工業大学
- Industrial Property Number
  2007-194124
- Filing Date
  2007-07-27
- Data Source
  KAKENHI-PROJECT-19206017
[Patent] 特許(東京工業大学TLO・理工学振興会に申請中)2006
- Inventor(s)
  吉岡勇人, 新野秀憲
- Industrial Property Rights Holder
  吉岡勇人, 新野秀憲
- Filing Date
  2006-03-31
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14102015
[Presentation] 研削において加工条件の影響の取り除きに基づくAE信号の解析2024
- Author(s)
  (2)任宗偉，吉岡勇人
- Organizer
  2024年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-23K26009
[Presentation] 工作機械ボルト結合部の伝熱特性に及ぼす接触面圧の影響2022
- Author(s)
  吉岡勇人, 遠藤将貴, 田島真吾
- Organizer
  日本機械学会第14回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Estimation method of cutting forces and abnormal vibrations by using frequency separation of acceleration sensor signals2022
- Author(s)
  Kouguchi, J., Yoshioka, H.
- Organizer
  19th International Conference on Precision Engineering (ICPE2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Advanced manufacturing systems based on mechatronics2022
- Author(s)
  Yoshioka, H.
- Organizer
  25th International Conference on Mechatronics Technology (ICMT2022)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Study on the vertical vibration behavior of beam caused by driving force2022
- Author(s)
  Li, Y., Kojima, H., Tajima, S., Yoshioka, H.
- Organizer
  2022 International Symposium on Flexible Automation (ISFA2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Fine pattern fabrication on a 3D surface using fast tool servo for milling process2021
- Author(s)
  Kojima, Y., Yoshioka, H., Tajima, S.
- Organizer
  Proceedings of the10th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Non-contact observation of tooth profile error of involute spur gears by using autocollimator2021
- Author(s)
  Yamamoto, F., Yoshioka, H., Tajima, S.
- Organizer
  Proceedings of the 23rd International Symposium on Advanced Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 新構造材料適用工作機械の構成と省エネルギー特性2021
- Author(s)
  吉岡勇人
- Organizer
  日本機械学会研究分科会RC288
- Invited
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 反力利用形カウンタウェイト機構における外乱応答特性2020
- Author(s)
  岩本啓志，吉岡勇人，田島真吾，新野秀憲
- Organizer
  2020年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Improvement of thermal deformation in a newly developed steel CFRP composite ball screw2020
- Author(s)
  Yoshioka, H., Saito, S., Kato, J., Shinno, H., Goto, S., Hori, N.
- Organizer
  Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] CFRPの繊維配向を考慮した工作機械テーブルの検討2020
- Author(s)
  吉岡勇人，橋本淳哉，田島真吾，新野秀憲
- Organizer
  2020年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 超精密切削加工を実現する要素技術2019
- Author(s)
  吉岡勇人
- Organizer
  日本機械学会関東支部神奈川ブロック
- Invited
- Data Source
  KAKENHI-PROJECT-17H03153
[Presentation] 超磁歪素子を用いたフライス用工具サーボによる微細加工の基本特性評価2019
- Author(s)
  吉岡勇人，田村勇樹，小島功太郎，新野秀憲
- Organizer
  日本機械学会　第13回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-17H03153
[Presentation] Development of an Ultraprecision Machining System2019
- Author(s)
  Hayato Yoshioka
- Organizer
  The 22nd International Symposium on Advances in Abrasive Technology
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03153
[Presentation] ハイパースペクトルデータに基づく研削砥粒表面の定量的評価2018
- Author(s)
  中村優之，吉岡勇人，新野秀憲
- Organizer
  2018年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 大気圧プラズマによる材料加工の特性評価2018
- Author(s)
  礒田颯，吉岡勇人，新野秀憲，沖野晃俊，川野浩明
- Organizer
  2018年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 次代の工作機械を目指して2017
- Author(s)
  吉岡勇人
- Organizer
  第91回東京工業大学技術交流セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 精密加工機の加工状態モニタリングおよび関連研究の紹介2017
- Author(s)
  吉岡勇人
- Organizer
  長野県精密加工技術研究会講習会
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Approach Detection of Diamond Cutting Tool by Using Photoelectric Effect2017
- Author(s)
  Hayato YOSHIOKA, Masahiro AKIYAMA, Hidenori SHINNO
- Organizer
  The International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 【基調講演】超磁歪素子の自己検知機能を利用した微小位置決め機構の開発2017
- Author(s)
  吉岡勇人
- Organizer
  2017年度日本機械学会年次大会
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 加工状態モニタリングとそれを用いた精密加工の高度化2017
- Author(s)
  吉岡勇人
- Organizer
  型技術協会
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超精密直動転がり案内テーブルにおけるMasing則に基づいた摩擦特性補償2016
- Author(s)
  礒田颯，吉岡勇人，新野秀憲
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 切削形工作機械の超高精度化2016
- Author(s)
  吉岡勇人
- Organizer
  自動車技術会製造技術部門委員会
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 【基調講演】精密加工におけるインプロセス計測2016
- Author(s)
  吉岡勇人
- Organizer
  日本金属プレス工業協会
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Surface Texture Assessment Based on Analysis of Laser Speckle2016
- Author(s)
  Hayato YOSHIOKA, Hidenori SHINNO, Motochika SHIMIZU, Hiroshi SAWANO
- Organizer
  The 17th International Machine Tool Engineers' Conference(The 17th IMEC)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Rotary-axial Positioning System with Giant Magnetostrictive Element2016
- Author(s)
  Yuuki TAMURA, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 7th CIRP Conference on High Performance Cutting(HPC2016), Cheminitz, Germany
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Tool Servo System Driven by Giant Magnetostrictive Element for Milling Process2016
- Author(s)
  Hayato YOSHIOKA, Hidenori SHINNO, Yuuki TAMURA
- Organizer
  The 17th International Machine Tool Engineers' Conference(The 17th IMEC)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超磁歪素子駆動回転形高速工具サーボによるフライス加工状態のインプロセス認識2016
- Author(s)
  田村勇樹，吉岡勇人，新野秀憲
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Noncontact gravity compensator with magnetic fluid seals2015
- Author(s)
  Noriyuki Hasegawa, Hayato Yoshioka, Hidenori Shinno
- Organizer
  The 8th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Kyoto Research Park, Japan
- Year and Date
  2015-10-19
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 回転主軸対応工具サーボシステムに関する研究2014
- Author(s)
  吉岡勇人
- Organizer
  第3回日本機械学会RC266次世代産業を牽引する工作機械に関する研究分科会
- Place of Presentation
  東京ビッグサイト
- Year and Date
  2014-11-03
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 回転主軸対応工具サーボシステムに関する研究2014
- Author(s)
  吉岡勇人
- Organizer
  第3回日本機械学会RC266研究分科会
- Place of Presentation
  東京ビッグサイト（東京都・江東区）
- Year and Date
  2014-11-03
- Invited
- Data Source
  KAKENHI-PROJECT-24360052
[Presentation] STMの測定原理を応用した三次元測定器の開発2013
- Author(s)
  澤野宏，後閑利通，吉岡勇人，新野秀憲
- Organizer
  精密工学会沼田記念論文賞記念講演会
- Place of Presentation
  株式会社ミツトヨ本社（神奈川県・川崎市）
- Year and Date
  2013-05-30
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超精密加工システムANGELの開発2013
- Author(s)
  吉岡勇人
- Organizer
  砥粒加工学会次世代固定砥粒加工プロセス専門委員会第48回研究会
- Place of Presentation
  埼玉大学東京ステーションカレッジ（東京都・千代田区）
- Year and Date
  2013-04-12
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超精密加工機の開発2013
- Author(s)
  吉岡勇人
- Organizer
  第46回マイクロ加工懇談会
- Place of Presentation
  理化学研究所板橋分所（東京都・板橋区）
- Year and Date
  2013-09-05
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 高度機能集積形マザーマシンの実現をめざして2013
- Author(s)
  新野秀憲，澤野宏，吉岡勇人
- Organizer
  精密工学会沼田記念論文賞記念講演会
- Place of Presentation
  株式会社ミツトヨ本社（神奈川県・川崎市）
- Year and Date
  2013-05-30
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 広域ナノパターンジェネレータ（ＡＮＧＥＬ）の開発2012
- Author(s)
  澤野宏，吉岡勇人，新野秀憲
- Organizer
  2012年マイクロマシン展
- Place of Presentation
  東京ビックサイト（東京都）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] An Ultra-Precision Machining System Equipped with an On-Machine Noncontact Profile Measuring Function2012
- Author(s)
  H. Sawano, H. Yoshioka, H. Shinno
- Organizer
  15th International Machine Tool Engineers' Conference
- Place of Presentation
  東京ビックサイト（東京都）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 広域ナノパターンジェネレータ（ＡＮＧＥＬ）の開発2012
- Author(s)
  澤野宏，吉岡勇人，新野秀憲
- Organizer
  セミコンジャパン2012
- Place of Presentation
  幕張メッセ（千葉県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 多軸超精密加工機のためのハイブリッドアクチュエータ駆動揺動テーブルシステム2012
- Author(s)
  澤野宏，吉岡勇人，新野秀憲
- Organizer
  セミコンジャパン2012
- Place of Presentation
  幕張メッセ（千葉県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 多軸超精密加工機のためのハイブリッドアクチュエータ駆動揺動テーブルシステム2012
- Author(s)
  澤野宏，吉岡勇人，新野秀憲
- Organizer
  2012年マイクロマシン展
- Place of Presentation
  東京ビックサイト（東京都）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Surface Texture Assessment of Ultra-Precision Machined Parts Using a Laser Speckle Method2012
- Author(s)
  M. Shimizu, H. Sawano, H. Yoshioka, H. Shinno
- Organizer
  15th International Machine Tool Engineers' Conference
- Place of Presentation
  東京ビックサイト（東京都）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] エバネッセント光を用いた工具‐工作物間距離の直接的計測2012
- Author(s)
  谷川涼一,吉岡勇人,澤野宏,新野秀憲
- Organizer
  第9回日本機械学会生産加工・工作機械部門講演会
- Place of Presentation
  秋田県立大学
- Data Source
  KAKENHI-PROJECT-23656098
[Presentation] 光学的手法を用いた工具‐工作物接触状態検知に関する研究2012
- Author(s)
  吉岡勇人
- Organizer
  2012年度精密工学会秋季大会学術講演会
- Place of Presentation
  九州工業大学
- Data Source
  KAKENHI-PROJECT-23656098
[Presentation] Structural Design of Long Range Sub-Nanometer Positioning System2011
- Author(s)
  Yoshioka Hayato, Kuroyama Shota, Sawano Hiroshi, Shinno Hidenori
- Organizer
  The 11th International Conference of the euspen
- Place of Presentation
  Lake Como
- Year and Date
  2011-05-25
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] In-Process Ultrasonic Monitoring Method for Cutting Process2011
- Author(s)
  Yoshioka Hayato, Fujiki Yusuke, SawanoHiroshi, Shinno Hidenori
- Organizer
  The 6th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Saitama, Japan
- Year and Date
  2011-11-09
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Structural Design of Long Range Sub-Nanometer Positioning System2011
- Author(s)
  Hayato Yoshioka, Shota Kuroyama, Hiroshi Sawano, Hidenori Shinno
- Organizer
  11th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Lake Como, Italy
- Year and Date
  2011-05-25
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] A Newly Developed AFM-Based Three Dimensional Profile Measuring System2011
- Author(s)
  Hiroshi Sawano, Sho Ayada, Hayato Yoshioka, Hidenori Shinno
- Organizer
  11th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Lake Como, Italy
- Year and Date
  2011-05-25
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] AFMプローブを用いた三次元形状計測システム2011
- Author(s)
  綾田翔,澤野宏,吉岡勇人,新野秀憲
- Organizer
  第8回生産加工・工作機械部門講演会
- Place of Presentation
  岡山
- Year and Date
  2011-11-19
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] A newly developed toroidal type torque ripple-free precision motor2011
- Author(s)
  Hayato Yoshioka, Yugo Kurisaki, Hiroshi Sawano, Hidenori Shinno
- Organizer
  15th International Conference on Mechatronics Technology
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-12-01
- Data Source
  KAKENHI-PROJECT-22686016
[Presentation] A hybrid actuator-driven compact tilting motion table system for multi-axis ultraprecision machine tool, 11th International Conference of the euspen2011
- Author(s)
  Mamoru Hayashi, Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
- Place of Presentation
  Lake Como, Italy
- Year and Date
  2011-05-25
- Data Source
  KAKENHI-PROJECT-22686016
[Presentation] A hybrid actuator-driven compact tilting motion table system for multi-axis ultraprecision machine tool2011
- Author(s)
  Mamoru Hayashi, Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
- Organizer
  11th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Lake Como, Italy
- Year and Date
  2011-05-25
- Data Source
  KAKENHI-PROJECT-22686016
[Presentation] In-Process Ultrasonic Monitoring Method for Cutting Process2011
- Author(s)
  Hayato Yoshioka, Yusuke Fujiki, Hiroshi Sawano, Hidenori Shinno
- Organizer
  6th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Saitama, Japan
- Year and Date
  2011-11-09
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] A Newly Developed AFM-Based Three Dimensional Profile Measuring System2011
- Author(s)
  Sawano Hiroshi, Ayada Sho, Yoshioka Hayato, Shinno Hidenori
- Organizer
  The 11th International Conference of the euspen
- Place of Presentation
  Lake Como, Italy
- Year and Date
  2011-05-25
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] On-Machine Shape Measuring System by Means of Optical Stylus for Nano-Machining2010
- Author(s)
  H.Sawano, M.Takahashi, H.Yoshioka, H.Shinno, K.Mitsui
- Organizer
  Proceedings of 4th CIRP International Conference on High performance Cutting
- Place of Presentation
  Gifu, Japan
- Year and Date
  2010-10-27
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Three-Dimensional Nano-Positioning System for Compact CMM2010
- Author(s)
  Sawano Hiroshi, Gokan Toshimichi, Yoshioka Hayato, Shinno Hidenori
- Organizer
  The 10th International Conference of the euspen
- Place of Presentation
  Delft, Netherland
- Year and Date
  2010-06-02
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Three-Dimensional Nano-Positioning System for Compact CMM2010
- Author(s)
  H.Sawano, T.Gokan, H.Yoshioka, H.Shinno
- Organizer
  Proceedings of the euspen International Conference-Delft-June 2010
- Place of Presentation
  Delft, Netherland
- Year and Date
  2010-06-02
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] AFMプローブを用いた三次元形状計測システム2010
- Author(s)
  綾田翔, 澤野宏, 吉岡勇人, 新野秀憲
- Organizer
  第8回生産加工・工作機械部門講演会講演前刷集
- Place of Presentation
  岡山
- Year and Date
  2010-11-19
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] System by Means of Optical Stylus for Nano-Machining2010
- Author(s)
  Sawano Hiroshi, Takahashi Motohiro, Yoshioka Hayato, Shinno Hidenori, Mitsui Kimiyuki
- Organizer
  Conference on High Performance Cutting
- Place of Presentation
  Gifu, Japan
- Year and Date
  2010-10-27
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Ultraprecision Machining System for Fabricating Nano-Devices, (poster session)2009
- Author(s)
  Takahashi, M., Yoshioka, H., Shinno, H.
- Organizer
  Proceedings of the 9th International Conference of the euspen, San Sebastian
- Place of Presentation
  Spain
- Data Source
  KAKENHI-PROJECT-20686011
[Presentation] High Torque and High Precision Rotary Table System Driven by Hybrid Actuator2009
- Author(s)
  Hayashi Mamoru, Sawano Hiroshi, Yoshioka Hayato, Shinno Hidenori
- Organizer
  The 9th International Conference of the euspen
- Place of Presentation
  San Sebastian, Spain
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Torque Error Compensation in Pneumatic Rotary Actuator System Using an Electromagnetic Force2009
- Author(s)
  Hayashi, M., Sawano, H., Yoshioka, H., Shinno, H.
- Organizer
  The 5^<th> International Conference on Leading Edge Manufacturing in 21^<st> Century
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Torque Error Compensation in Pneumatic Rotary Actuator System Using an Electromagnetic Force2009
- Author(s)
  Hayahi Mamoru, Sawano Hiroshi, Yoshioka Hayato, Shinno Hidenori
- Organizer
  The 5th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Ranges2009
- Author(s)
  Kurisaki, Y., Sawano, H., Yoshioka, H., Shinno, H.
- Organizer
  The 5^<th> International Conference on Leading Edge Manufacturing in 21^<st> Century
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Ranges2009
- Author(s)
  Yugo KURISAKI, Hiroshi SAWANO, Hayato YOSHIOKA, Hidenori Shinno
- Organizer
  The 5th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Osaka, Japan
- Data Source
  KAKENHI-PROJECT-20686011
[Presentation] High Torque and High precision Rotary Table System Driven by Hybrid Actuator2009
- Author(s)
  Hayashi, M., Sawano, H., Yoshioka, H., Shinno, H.
- Organizer
  The 9^<th> International Conference of the euspen
- Place of Presentation
  San Sebastian, Spain
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] Ultraprecision Machining System for Fabricating Nano-Devices2009
- Author(s)
  M. Takahashi, H. Yoshioka, H. Shinno
- Organizer
  The 9th euspen International Conference
- Place of Presentation
  スペイン・サンセバスチャン
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] A Newly Developed X-Y Planar Nano-Motion Table System with Large Travel Ranges2009
- Author(s)
  Kurisaki Yugo, Sawano Hiroshi, Yoshioka Hayato, Shinno Hidenori
- Organizer
  The 5th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-21246026
[Presentation] High Torque and High Precision Rotary Table System Driven by Hybrid Actuator2009
- Author(s)
  M. Hayashi, H. Yoshioka, H. Shinno
- Organizer
  The 9th euspen International Conference
- Place of Presentation
  スペイン・サンセバスチャン
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Vertical Nano-Positioning Stage with Noncontact Gravity Compensator.2008
- Author(s)
  Hidenori SHINNO, Motohiro TAKAHASHI, Hayato YOSHIOKA.
- Organizer
  The 13th International Machine Tool Engineers' Conference
- Place of Presentation
  東京・東京ビッグサイト
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Vertical Nano- Positioning Stage with Noncontact Gravity Compensator2008
- Author(s)
  H. SHINNO, M. TAKAHASHI, H. YOSHIOKA
- Organizer
  The 13th International Machine Tool Engineers' Conference
- Place of Presentation
  東京・東京ビッグサイト
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Adaptive Control for Ultraprecision Machining Using an In-Process Micro Thermosensor.2008
- Author(s)
  Hayato YOSHIOKA, Mamoru HAYASHI, Hidenori SHINNO.
- Organizer
  The 13th International Machine Tool Engineers' Conference
- Place of Presentation
  東京・東京ビッグサイト
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] ハイブリッドアクチュエータを用いた高トルク高精度回転機構の開発2008
- Author(s)
  林遵, 吉岡勇人, 新野秀憲
- Organizer
  第7回日本機械学会生産加工・工作機械部門講演会
- Place of Presentation
  岐阜県・長良川国際会議場
- Year and Date
  2008-11-22
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Vertical Nano-Positioning System for Precision Machine2008
- Author(s)
  H. Yoshioka, M. Takahashi and H. Shinno
- Organizer
  8th euspen International Conference
- Place of Presentation
  スイス・チューリッヒ
- Year and Date
  2008-05-20
- Data Source
  KAKENHI-PROJECT-20686011
[Presentation] Vertical nano-positioning system for precision machine2008
- Author(s)
  Yoshioka, H., Takahashi. M., Shinno, H.
- Organizer
  Proceedings of the 10th Anniversary International Conference of the euspen, Zurich
- Place of Presentation
  Switzerland
- Data Source
  KAKENHI-PROJECT-20686011
[Presentation] Vertical Nano-Positioning System for Precision Machine2008
- Author(s)
  H. Yoshioka, M. Takahashi, H.Shinno
- Organizer
  The 8th euspen International Conference
- Place of Presentation
  スイス・チューリッヒ
- Year and Date
  2008-05-20
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Vertical Nano-Positioning System for Precision Machine2008
- Author(s)
  H. Yoshioka, M. Takahashi, H. Shinno
- Organizer
  8th euspen International Conference
- Place of Presentation
  スイス・チューリッヒ
- Year and Date
  2008-05-20
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Adaptive Control for Ultraprecision Machining Using an In-Process Micro Thermosensor2008
- Author(s)
  Hayato YOSHIOKA, Mamoru HAYASHI, Hidenori SHINNO
- Organizer
  The 13th International Machine Tool Engineers' Conference
- Place of Presentation
  東京・東京ビッグサイト
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Vertical Nano-Positioning System with Gravity Compensator2007
- Author(s)
  Motohiro TAKAHASHI, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor2007
- Author(s)
  Mamoru HAYASHI, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 4th International conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] A Newly Developed Compact Nano-Positioning Table System Using Squeeze Bearing2007
- Author(s)
  Toshimichi GOKAN, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] Vertical Nano-Positioning System with Gravity Compensator2007
- Author(s)
  Motohiro TAKAHASHI, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 4th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] An Adaptive Control of Ultraprecision Machining with an In-Process Micro-Sensor2007
- Author(s)
  Mamoru HAYASHI, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 4th International conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] A Newly Developed Compact Nano-Positioning Table System Using Squeeze Bearing2007
- Author(s)
  Toshimichi GOKAN, Hayato YOSHIOKA, Hidenori SHINNO
- Organizer
  The 4th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19206017
[Presentation] エバネッセント光を用いた工具‐工作物間距離の直接的計測
- Author(s)
  谷川涼一，吉岡勇人，澤野宏，新野秀憲
- Organizer
  第9回生産加工・工作機械部門講演会
- Place of Presentation
  秋田県立大学（秋田県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] A long-range straightness measurement with motion error compensation
- Author(s)
  Takuya Komiyama, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
- Organizer
  Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  ホテル松島大観荘（宮城県・松島町）
- Year and Date
  2013-11-07 – 2013-11-08
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Magnetic attraction force-preloaded aerostatic guideway for high speed nano positioning system
- Author(s)
  Takumi Tsumura, Hayato Yoshioka, Hidenori Shinno, Hiroshi Sawano
- Organizer
  Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  ホテル松島大観荘（宮城県・松島町）
- Year and Date
  2013-11-07 – 2013-11-08
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Direct measurement of relative distance between tool and workpiece using an evnecent light
- Author(s)
  Hayato Yoshioka, Ryoichi Tanigawa, Hiroshi Sawano, Hidenori Shinno
- Organizer
  Proceedings of the 16th International Machine Tool Engineers' Conference
- Place of Presentation
  Tokyo Big Sight
- Year and Date
  2014-10-31 – 2014-11-04
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 磁束密度を用いた超磁歪素子駆動微動機構の位置決め
- Author(s)
  田村勇樹，澤野宏，吉岡勇人，新野秀憲
- Organizer
  2015年度精密工学会春季大会
- Place of Presentation
  東洋大学（東京都・文京区・白山キャンパス）
- Year and Date
  2015-03-17 – 2015-03-19
- Data Source
  KAKENHI-PROJECT-24360052
[Presentation] Ultraprecision machinery system for manufacturing
- Author(s)
  Hayato YOSHIOKA
- Organizer
  JSPS-DST Asian Academic Seminar 2012
- Place of Presentation
  Indian Institute of Technology, Bombay (インド・ムンバイ)
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] ナノ位置決め技術を用いた超精密機械システム
- Author(s)
  吉岡勇人
- Organizer
  2012精研公開　技術セミナー
- Place of Presentation
  東京工業大学（神奈川県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超磁歪素子の自己検知機能を用いた微小位置決め機構
- Author(s)
  田村勇樹，澤野宏，吉岡勇人，新野秀憲
- Organizer
  第10回日本機械学会生産加工・工作機械部門講演会
- Place of Presentation
  徳島大学
- Year and Date
  2014-11-15 – 2014-11-16
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 可変自成絞りのよる油静圧軸受の高性能化
- Author(s)
  中村悠亮，澤野宏，吉岡勇人，新野秀憲
- Organizer
  2013年度精密工学会春季大会学術講演会
- Place of Presentation
  東京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超磁歪素子の自己検知機能を用いた微小位置決め機構
- Author(s)
  田村勇樹，澤野宏，吉岡勇人，新野秀憲
- Organizer
  第10回日本機械学会生産加工・工作機械部門講演会
- Place of Presentation
  徳島大学（徳島県・徳島市・常三島キャンパス）
- Year and Date
  2014-11-15 – 2014-11-16
- Data Source
  KAKENHI-PROJECT-24360052
[Presentation] Precision Engineering in Tokyo Institute of Technology
- Author(s)
  H. Yoshioka
- Organizer
  Technical Meeting in PTB
- Place of Presentation
  PTB（ドイツ物理工学研究所）（ドイツ）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 工作機械要素技術を応用した超精密三次元形状計測システム
- Author(s)
  吉岡勇人
- Organizer
  第３３回工作機械技術振興賞贈賞式講演会
- Place of Presentation
  東海大学校友会館（東京都）
- Invited
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 低融点合金を用いた高速回転主軸用オートバランサ
- Author(s)
  澤野宏，綾田翔，吉岡勇人，新野秀憲
- Organizer
  第9回生産加工・工作機械部門講演会
- Place of Presentation
  秋田県立大学（秋田県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Hydrostatic Bearing with High Bulk Modulus Fluid
- Author(s)
  K. Kuze, H. Sawano, H. Yoshioka, H. Shinno
- Organizer
  14th International Conference on Precision Engineering
- Place of Presentation
  淡路夢舞台（兵庫県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 超多点法による高速かつロバストな広範囲表面形状測定
- Author(s)
  村井花菜，澤野宏，吉岡勇人，新野秀憲
- Organizer
  第10回日本機械学会生産加工・工作機械部門講演会
- Place of Presentation
  徳島大学
- Year and Date
  2014-11-15 – 2014-11-16
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] A Thermally Stable High Speed Spindle System Equipped with Self-Cooling Function
- Author(s)
  Y. Tamura, H. Sawano, H. Yoshioka, H. Shinno
- Organizer
  14th International Conference on Precision Engineering
- Place of Presentation
  淡路夢舞台（兵庫県）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] A Newly Developed Nano-Pattern Generator Equipped with an On-Machine Measuring Function
- Author(s)
  H. Sawano, H. Yoshioka, H. Shinno
- Organizer
  12th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  ストックホルム（スウェーデン）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Surface Texture Characterization of Ultra-Precision Machined Parts Based on Laser Speckle Pattern Analysis
- Author(s)
  M. Shimizu, H. Sawano, H. Yoshioka, H. Shinno
- Organizer
  12th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  ストックホルム（スウェーデン）
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Multi-dimensional assessment of precision machined surfact texture based on laser speckel pattern analysis
- Author(s)
  Motochika Shimizu, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
- Organizer
  Proceedings of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering
- Place of Presentation
  Capri, Italy
- Year and Date
  2014-07-23 – 2014-07-25
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] Magnetic fluid seal for linear motion system with gravity compensator
- Author(s)
  Yuichi Mizutani, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno
- Organizer
  Proceedings of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering
- Place of Presentation
  Capri, Italy
- Year and Date
  2014-07-23 – 2014-07-25
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] High performence hydrostatic bearing using a variable inherent restrictor
- Author(s)
  Hiroshi Sawano, Yusuke Nakamura, Hayato Yoshioka, Hidenori Shinno
- Organizer
  Proceedings of the 16th International Machine Tool Engineers' Conference
- Place of Presentation
  Tokyo Big Sight
- Year and Date
  2014-10-31 – 2014-11-04
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] High performance hydrostatic bearing with a variable inherent resrictor
- Author(s)
  Hiroshi Sawano, Yusuke Nakamura, Hayato Yoshioka, Hidenori Shinno
- Organizer
  Proceedings of the 12th International Symposium in Fluid Control, Measurement and Visualization
- Place of Presentation
  奈良県新公会堂（奈良県・奈良市）
- Year and Date
  2013-11-18 – 2013-11-23
- Data Source
  KAKENHI-PROJECT-24226004
[Presentation] 光学的手法を用いた工具‐工作物接触状態検知に関する研究
- Author(s)
  吉岡勇人，井手隼人，澤野宏，新野秀憲
- Organizer
  2012年度精密工学会秋季大会学術講演会
- Place of Presentation
  九州工業大学（福岡県）
- Data Source
  KAKENHI-PROJECT-24226004

1. SHINNO Hidenori (40196639)

# of Collaborated Projects: 5 results

# of Collaborated Products: 191 results
2. SAWANO Hiroshi (40514295)

# of Collaborated Projects: 4 results

# of Collaborated Products: 69 results
3. Sugita Naohiko (70372406)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. 橋詰等 (50218400)

# of Collaborated Projects: 1 results

# of Collaborated Products: 44 results
5. 柿沼康弘 (70407146)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 小池綾 (70781417)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 河野大輔 (80576504)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 福井類 (80607416)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. ニンシューイ (30926118)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 田島真吾 (70862308)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Yoshioka Hayato 吉岡 勇人

YOSHIOKA Hayato 吉岡 勇人

Research Projects

Research Products

Co-Researchers

Machining process control with active spindle equipped with positioning and sensing functionsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Machine tools based on inovation of design and informatics

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Realization of nano-structured free form surface and optimization of functional pattern on the surfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

An advanced integrated mother machine system(AIMS) and formulation of machine tool engineering based on the development process

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of fast tool servo system for milling processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Direct monitoring of contact condition between tool and workpiecein ultraprecision cutting using evanescent lightPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Hybrid actuator-driven ultraprecision 2-DOF rotary table systemPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Newly Developed Compact Tree-Dimensional Profile Measuring System "Compact Nano-Profiler"

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a sub-nano positioning system with long stroke by minimizing error factors of the systemPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Newly Developed of Advanced Nano-pattern Generator with Large Work Area (ANGEL) and Investigation on the Nano-machinability

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

センサ機能付加切削工具を用いた超精密切削加工の能動制御に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Ultraprecision ＆ Ultrafine Machining System for Fabricating Nano-Devices

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 磁性材料・部品の最新開発事例と応用技術2018

Author(s)

Total Pages

Yoshioka Hayato 吉岡勇人

YOSHIOKA Hayato 吉岡勇人