Osada Toshiko 長田稔子

… Alternative Names

OSADA Toshiko 長田稔子

Less

Researcher Number	90452812
Other IDs
Affiliation (Current)	2025: 東京都立大学, システムデザイン研究科, 特任助教
Affiliation (based on the past Project Information) *help	2020: 東京都立大学, システムデザイン研究科, 特任助教 2018 – 2019: 首都大学東京, システムデザイン研究科, 特任助教 2015: 九州大学, 大学院工学研究院, 助教 2012 – 2015: 九州大学, 工学(系)研究科(研究院), 助教 2013: 九州大学, 大学院工学研究院, 助教
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Basic Section 26050:Material processing and microstructure control-related Except Principal Investigator Material processing/treatments / Material processing/Microstructural control engineering
Keywords	Principal Investigator 金属粉末射出成形 / 機械的特性 / 変形 / 脱脂 / バインダ / 熱伝導率 / 繊維配向 / 炭素繊維 / 銅 / 粒径 / その場観察 … More Except Principal Investigator … More ＭＩＭ / 異方性 / 機械的性質 / 一方向組織制御 / スーパーアロイ / レーザフォーミング / Ｔｉ合金 / 脱脂プロセス / バインダ / 寸法精度 / 複雑大形化 / チタン合金 / 金属粉末射出成形 / 有限要素法 / 超強靭化 / 転造 / ネット構造 / ヘテロ組織 / MIM Less

Innovative process for high aspect ratio structure of metal injection molded productsPrincipal Investigator
- Principal Investigator
  
  Osada Toshiko
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Tokyo Metropolitan University
Challenge for development of advanced 4D processing technique
- Principal Investigator
  
  Miura Hideshi
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kyushu University
Development of innovative debinding system for micro metal injection moldingPrincipal Investigator
- Principal Investigator
  
  Osada Toshiko
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyushu University
Ultrahigh strengthening sintered low alloy steels by advanced powder processing for heterogeneous microstructural control
- Principal Investigator
  
  Miura Hideshi
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyushu University
Challenge to More Complicated and Large Sized Components Using Next Generation Ti Alloys Trough MIM process.
- Principal Investigator
  
  MIURA Hideshi
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyushu University
Development of an innovative binder system for high quality and functional micro metal injection molding productsPrincipal Investigator
- Principal Investigator
  
  OSADA Toshiko
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyushu University

All 2023 2021 2020 2019 2016 2015 2014 2013 Other

All Journal Article Presentation

[Journal Article] Anisotropic Mechanical Properties of Ni-base Superalloy Compacts by Direct Laser Forming Technology2016
- Author(s)
  Naoto YOSHIGAI, Keita KAJIHARA, Toshiko OSADA, Kentaro KUDO, Fujio TSUMORI, Hideshi MIURA
- Journal Title
  
  Journal of the Japan Society of Powder and Powder Metallurgy
  
  Volume: 63
- NAID
  130005164647
- Data Source
  KAKENHI-PROJECT-26630367
[Journal Article] Control the distortion of large and complex shaped parts by metal injection molding process2016
- Author(s)
  Ryuichi HASHIKAWA, Toshiko OSADA, Kentaro KUDO, Fujio TSUMORI, and Hideshi MIURA
- Journal Title
  
  Journal of the Japan Society of Powder and Powder Metallurgy
  
  Volume: 63
- NAID
  130005164648
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26820011
[Journal Article] 3D Modeling of Heterogeneous Microstructure for Super-high Strengthened Low Alloy Steels by MIM Process2014
- Author(s)
  Yang Xu, Fujio Tsumori, Toshiko Osada, W.S.W. Harun, H. Miura
- Journal Title
  
  Proceedings of the PM2014 World Congress
  
  Volume: CD-ROM Pages: 1505-1510
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24246123
[Journal Article] Evaluation of Heterogeneous Microstructure for Ultrahigh Strengthening MIM Sintered Low Alloy Steels2013
- Author(s)
  W.S.W. Harun, T. Osada, H.G. Kang, F. Tsumori, H. Miura
- Journal Title
  
  Proceedings of 2013 International Conference on Powder Metallurgy & Particulate Materials
  
  Volume: No.40 Pages: 24-27
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24246123
[Journal Article] Numerical Analysis for Heterogeneous Microstructure of Fe-Ni Low Alloy Steels by Metal Injection Molding2013
- Author(s)
  W.S.W. Harun, H. Miura, T. Osada, Y. Xu, H.G. Kang, F. Tsumori
- Journal Title
  
  Proceedings of International Conference on Materials Processing Technology 2013
  
  Volume: June Pages: 225-229
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] DEFORMATION OF INJECTION MOLDED CARBON FIBER AND COPPER COMPOSITES2023
- Author(s)
  Toshiko Osada and Satoshi Kobayashi
- Organizer
  TWENTY-THIRD INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM23)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の変形挙動2021
- Author(s)
  長田稔子，小林訓史，品川一成
- Organizer
  粉体粉末冶金協会2021年度春季大会
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] Development of Powder Injection Molded Carbon Fiber Reinforced Composites2021
- Author(s)
  Toshiko OSADA and Satoshi KOBAYASHI
- Organizer
  The American Ceramic Society (ACerS) 45th International Conference and Expo on Advanced Ceramics and Composites (ICACC’21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の力学的特性2020
- Author(s)
  長田稔子，小林訓史
- Organizer
  日本機械学会年次大会
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の開発2020
- Author(s)
  長田稔子，小林訓史，品川一成
- Organizer
  第11回日本複合材料会議（JCCM11）
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の力学的特性2020
- Author(s)
  長田稔子，小林訓史
- Organizer
  日本機械学会2020年度年次大会
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] 金属粉末射出成形による炭素繊維強化銅複合材料の機械的特性2019
- Author(s)
  長田稔子, 小林訓史, 品川一成
- Organizer
  粉体粉末冶金協会春季大会
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] Metal Injection Molding of Cu/CF Composites2019
- Author(s)
  Toshiko Osada, Satoshi Kobayashi, Kazunari Shinagawa
- Organizer
  22nd International Conference on Composites Materials
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] METAL INJECTION MOLDING OF CU/CF COMPOSITES2019
- Author(s)
  T. Osada, S. Kobayashi, and K. Shinagawa
- Organizer
  ICCM22
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] 金属粉末射出成形による炭素繊維強化銅複合材料の機械的特性2019
- Author(s)
  長田稔子，小林訓史，品川一成
- Organizer
  粉体粉末冶金協会春季大会
- Data Source
  KAKENHI-PROJECT-18K04782
[Presentation] Control the Deformation of MIM Parts by the Powder Size Distribution2016
- Author(s)
  Toshiko OSADA, Kentaro Kudo, Ryuichi HASHIKAWA, Fujio TSUMORI, Hideshi MIURA
- Organizer
  World PM2016
- Place of Presentation
  ハンブルグ
- Year and Date
  2016-10-09
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820011
[Presentation] Fatigue properties of MIM super-high strengthened Fe-Ni steels with heterogeneous microstructures2016
- Author(s)
  Hideshi Miura, Ziqi Song, Kenta Yasui, Kentaro Kudo, Toshiko Osada, Fujio Tsumori
- Organizer
  PowderMet2016
- Place of Presentation
  ボストン
- Year and Date
  2016-06-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] 有限要素解析による超強靭低合金鋼のメゾへテロ構造評価2015
- Author(s)
  徐楊，Wan Sharzi Wan HARUN，津守不二夫，長田稔子，三浦秀士
- Organizer
  粉体粉末冶金協会，平成27年度春季大会
- Place of Presentation
  東京
- Year and Date
  2015-05-27
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] Anisotropic Mechanical Properties of Ni-base Superalloy Compacts by Direct Laser Forming Technology2015
- Author(s)
  Naoto YOSHIGAI, Keita KAJIHARA, Toshiko OSADA, Kentaro KUDO, Fujio TSUMORI, Hideshi MIURA
- Organizer
  The 3rd International Conference on Powder Metallurgy in Asia (APMA2015)
- Place of Presentation
  京都
- Year and Date
  2015-11-09
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630367
[Presentation] 3Dレーザ積層造形法によるNi基スーパーアロイ構造体の機械的特性2015
- Author(s)
  吉開　巨都，梶原　啓太，津守　不二夫，長田　稔子，三浦　秀士
- Organizer
  粉体粉末冶金協会，平成27年度春季大会
- Place of Presentation
  東京
- Year and Date
  2015-05-26
- Data Source
  KAKENHI-PROJECT-26630367
[Presentation] Control the Distortion of the Large and Complex Shaped Parts by the Metal Injection Molding Process2015
- Author(s)
  Ryuichi HASHIKAWA, Toshiko OSADA, Kentaro KUDO, Fujio TSUMORI, and Hideshi MIURA
- Organizer
  The 3rd International Conference on Powder Metallurgy in Asia (APMA2015)
- Place of Presentation
  京都
- Year and Date
  2015-11-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820011
[Presentation] MIM大形部品の変形に及ぼす原料粉末粒度分布の影響2014
- Author(s)
  長田稔子
- Organizer
  粉体粉末冶金協会，第26回射出成形技術・評価研究会
- Place of Presentation
  京都
- Year and Date
  2014-10-24
- Data Source
  KAKENHI-PROJECT-26820011
[Presentation] 原料粉末粒度分布制御によるMIM大形複雑形状品の変形抑制2014
- Author(s)
  長田稔子，櫻井亮輔，徐楊，津守不二夫，三浦秀士，戸田欽二
- Organizer
  粉体粉末冶金協会平成26年度春季大会
- Place of Presentation
  東京
- Year and Date
  2014-06-03
- Data Source
  KAKENHI-PROJECT-26820011
[Presentation] レーザ積層造形法によるNi基スーパーアロイ構造体の機械的特性2014
- Author(s)
  吉開巨都, 梶原啓太, 津守不二夫, 長田稔子, 三浦秀士
- Organizer
  平成26年度塑性加工学会九州若手技術交流会
- Place of Presentation
  鹿児島大学郡元キャンパス・稲盛会館
- Year and Date
  2014-11-21
- Data Source
  KAKENHI-PROJECT-26630367
[Presentation] マイクロ金属粉末射出成形のための脱脂挙動観察およびバインダシステム2013
- Author(s)
  長田稔子， Shinta Virdhian，姜賢求，津守不二夫，三浦秀士
- Organizer
  日本粉末冶金工業会　技術情報懇談会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-24760079
[Presentation] マイクロ金属粉末射出成形のための脱脂挙動観察およびバインダシステム2013
- Author(s)
  長田稔子,Shinta Virdhian,姜賢求,津守不二夫,三浦秀士
- Organizer
  日本粉末冶金工業会技術情報懇談会
- Data Source
  KAKENHI-PROJECT-24760079
[Presentation] マイクロ金属粉末射出成形のためのバインダと脱脂挙動観察2013
- Author(s)
  長田稔子
- Organizer
  第25回射出成形技術・評価研究会
- Data Source
  KAKENHI-PROJECT-24760079
[Presentation] 焼結低合金鋼の超強靭化を目的とした有限要素法によるメゾヘテロ組織設計
- Author(s)
  徐楊，長田稔子，津守不二夫，三浦秀士
- Organizer
  （一社）粉体粉末冶金協会，平成26年度春季大会
- Place of Presentation
  早稲田大学（国際会議場）
- Year and Date
  2014-06-03 – 2014-06-05
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] ヘテロ組織を利用した超強靭焼結合金鋼の創製と解析
- Author(s)
  三浦秀士，W. S. W. Harun，長田稔子，徐楊，津守不二夫
- Organizer
  （一社）日本機械学会，機械材料・材料加工部門，第21回機械材料・材料加工技術講演会（Ｍ＆Ｐ2013）
- Place of Presentation
  首都大学東京（東京都八王子市）
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] レーザ粉末溶融積層法による3D部材の機械的特性
- Author(s)
  馬場園卓哉，長田稔子，津守不二夫，三浦秀士
- Organizer
  （一社）粉体粉末冶金協会，平成26年度秋季大会
- Place of Presentation
  大阪大学コンベンションセンター
- Year and Date
  2014-10-29 – 2014-10-30
- Data Source
  KAKENHI-PROJECT-26630367
[Presentation] マイクロ金属粉末射出成形のためのバインダと脱脂挙動観察
- Author(s)
  長田稔子
- Organizer
  第25回射出成形技術・評価研究会
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-24760079
[Presentation] Numerical Analysis for Heterogeneous Microstructure of Fe-Ni Low Alloy Steels by Metal Injection Molding
- Author(s)
  H. Miura, W.S.W. Harun, T. Osada, Y. Xu, H.G. Kang, F. Tsumori
- Organizer
  MAPT2013（International Conference on Materials Processing Technology 2013)
- Place of Presentation
  Bangkok（Thailand）
- Invited
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] ヘテロ組織を利用したMIM超強靭焼結低合金鋼の動的破壊特性
- Author(s)
  宋子奇、長田稔子、津守不二夫、三浦秀士
- Organizer
  （一社）粉体粉末冶金協会，平成26年度秋季大会
- Place of Presentation
  大阪大学コンベンションセンター
- Year and Date
  2015-10-29 – 2015-10-30
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] Fine Heterogeneou Microstructure and Mechanical Properties of MIM Fe-Ni Alloy Steels
- Author(s)
  H. Miura, W. S. W Harun, T. Osada, H. K. Kang, F. Tsumori
- Organizer
  Powder Meta 2013(2013 International Conference on powder Metallurgy & Particulate Materials)
- Place of Presentation
  Chicago（U.S.A.）
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] MIMによる超強靭焼結低合金鋼のメゾヘテロ組織解析
- Author(s)
  三浦秀士，長田稔子，徐楊，津守不二夫，W. S. W. Harun
- Organizer
  （社）日本金属学会，2013年秋期講演大会
- Place of Presentation
  金沢大学（石川県金沢市）
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] 3D Modeling of Heterogeneous Microstructure for Super-high Strengthened Low Alloy Steels by MIM Process
- Author(s)
  Yang Xu, Hideshi Miura, Fujio Tsumori, Toshiko Osada, W.S.W. Harun
- Organizer
  PM2014
- Place of Presentation
  Orlando(U.S.A)
- Year and Date
  2014-05-18 – 2014-05-22
- Data Source
  KAKENHI-PROJECT-24246123

1. Miura Hideshi (30117254)

# of Collaborated Projects: 3 results

# of Collaborated Products: 17 results
2. TSUMORI FUJIO (10343237)

# of Collaborated Projects: 2 results

# of Collaborated Products: 17 results
3. KANG Hyongoo (30599981)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
4. 徐楊 (60648559)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 品川一成 (30215983)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
6. 小林訓史 (80326016)

# of Collaborated Projects: 1 results

# of Collaborated Products: 10 results

Osada Toshiko 長田 稔子

OSADA Toshiko 長田 稔子

Research Projects

Research Products

Co-Researchers

Innovative process for high aspect ratio structure of metal injection molded productsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Challenge for development of advanced 4D processing technique

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of innovative debinding system for micro metal injection moldingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ultrahigh strengthening sintered low alloy steels by advanced powder processing for heterogeneous microstructural control

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Challenge to More Complicated and Large Sized Components Using Next Generation Ti Alloys Trough MIM process.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of an innovative binder system for high quality and functional micro metal injection molding productsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Anisotropic Mechanical Properties of Ni-base Superalloy Compacts by Direct Laser Forming Technology2016

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Control the distortion of large and complex shaped parts by metal injection molding process2016

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 3D Modeling of Heterogeneous Microstructure for Super-high Strengthened Low Alloy Steels by MIM Process2014

Author(s)

Journal Title

Data Source

[Journal Article] Evaluation of Heterogeneous Microstructure for Ultrahigh Strengthening MIM Sintered Low Alloy Steels2013

Author(s)

Journal Title

Data Source

[Journal Article] Numerical Analysis for Heterogeneous Microstructure of Fe-Ni Low Alloy Steels by Metal Injection Molding2013

Author(s)

Journal Title

Data Source

[Presentation] DEFORMATION OF INJECTION MOLDED CARBON FIBER AND COPPER COMPOSITES2023

Author(s)

Organizer

Data Source

[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の変形挙動2021

Author(s)

Organizer

Data Source

[Presentation] Development of Powder Injection Molded Carbon Fiber Reinforced Composites2021

Author(s)

Organizer

Data Source

[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の力学的特性2020

Author(s)

Organizer

Data Source

[Presentation] 金属粉末射出成形による炭素繊維/銅複合材料の開発2020

Osada Toshiko 長田稔子

OSADA Toshiko 長田稔子