• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Kanai Satoshi  金井 理

ORCIDConnect your ORCID iD *help
… Alternative Names

KANAI Satoshi  金井 理

SANAI S  金井 理

Less
Researcher Number 90194878
Other IDs
External Links
Affiliation (Current) 2020: 北海道大学, 情報科学研究院, 教授
Affiliation (based on the past Project Information) *help 2011 – 2019: 北海道大学, 情報科学研究科, 教授
2007 – 2012: Hokkaido University, 大学院・情報科学研究科, 教授
2006: Hokkaido Univ., Grad. School of Info. Sci. and Tech., Asso.Prof.,, 大学院情報科学研究科, 助教授
2004 – 2005: Hokkaido Univ., Grad.School of Info.Sci.and Tech., Asso.Prof., 大学院・情報科学研究科, 助教授
1997 – 2003: University of Hokkaido, Graduate School of Engineering, Assistant Professor, 大学院・工学研究科, 助教授 … More
1998: 北海道大学, 大学院工学研究科, 助教授
1996: 北海道大学, 大学院工学研究科, 助教授
1995: 北海道大学, 工学部, 助教授
1993 – 1994: 東京工業大学, 工学部, 助教授
1989 – 1991: 東京工業大学, 工学部, 助教授
1988: 北海道大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
機械工作・生産工学 / Design engineering/Machine functional elements/Tribology / Production engineering/Processing studies / Perception information processing/Intelligent robotics / Social systems engineering/Safety system / 機械工作
Except Principal Investigator
機械工作 / 機械工作・生産工学 / Civil engineering project/Traffic engineering / Design engineering/Machine functional elements/Tribology / 情報システム学(含情報図書館学) / Fundamental nursing / Basic Section 18030:Design engineering-related
Keywords
Principal Investigator
CAD / リバースエンジニアリング / メッシュモデル / FEM / CAE / 形状モデリング / ソリッドモデル / デジタルヒューマンモデル / CAM / 3次元CAD … More / 人間工学 / 工程設計 / レーザスキャン / 組立 / Assembly / 形状モデル / コンピュータグラフィックス / シミュレーション / HLA / Fieldbus / 人工現実感 / 自由曲面 / 意匠設計 / NCプログラミング / X線CTスキャン / 高速プロトタイピング / 延命化 / 機械工作・生産工学 / 設計工学 / X線CT計測 / ユークリッド対称性 / 規則性 / スイープ型Feature / デジタルハンド / 情報機器 / ユーザビリティ / デジタルヒューマンモデリング / デジタルエンジニアリング / 接触変形 / MEMS, 工程設計 / MEMS / 安心・安全設計 / 建設マネジメント / 維持管理工学 / MLS / CAD/CAE / 物体認識 / CAD・CAE / 安全・安心設計 / 点群 / 安心の社会技術 / アクセシビリティ / 安全システム / 拘束条件 / 組立手順生成 / CASE / 組立機械機構モデリング / セル制御 / 組立状態モデル / 自動組立 / 作業設計 / 運動拘束 / 組立設備 / Process Planning / Constratint condition / Solid Medel / Modeling of Assembly Machine / Assembly Sequence Planning / Cell Control / Computer Aided Software Engineering / 位置調整 / 圧電素子 / ボルト締結 / 公差配分 / 公差解析 / 組立誤差 / 3次元測定器 / マイクロインパクトハンマー / Positional Adjustment / Piezoelectric Actuator / Bolt Fastening / Tolerance Synthesis / Tolerance Analysis / Assembling Deviation / リサイクル / 分解 / 破棄 / 環境性設計 / 環境問題 / エコデザイン / 破砕 / 分解・破砕・選別 / 組立モデル / RECYCLE / DISASSEMBLY / DISPOSAL / DESIGN FOR ENVIRONMENT / ENVIRONMENTAL ISSUES / ECODESIGN / SHREDDING / 電子透かし / 情報セキュリティ / ポリゴンモデル / ウエーブレット / DIGITAL WATERMARKING / GEOMETRIC MODEL / INFORMATION SEQUIRITY / POLYGONAL MODEL / COMPUTER GRAPHICS / WAVELET TRANSFORM / ファクトリーオートメーション / ネットワーク / 分散制御システム / オブジェクト指向 / StateChart / デザインパターン / ソフトウエアテスト / 自動化 / UML / FACTORY AUTOMATION / NETWORK / DISTRIBUTED CONTROL SYSYTEM / OBJECT ORIENTATION / Statecharts / SIMULATION / DESIGN PATTERN / SOFTWARE TESTING / 多重解像度 / LOD制御 / 干渉チェック / テクスチャマッピング / ウエーブレット変換 / Mesh Model / Multi-resolution / Level-Of-Detail / Collision Check / Reverse Engineering / 包装機械 / Time Warp / メッシュ生成 / 自動機械 / FA / simulation / packaging machine / time warp / mesh generation / 解析 / mesh model / analysis / reverse engineering … More
Except Principal Investigator
CAD / CAM / EXPRESS / 点群 / 3次元計測 / 大規模環境 / 製品モデル / 形状認識 / CAD@CAM / 金型 / エキスパートシステム / 形状創成関数 / 加工プロセスモデル / プロセスモデル / 工程設計 / IDEFO / Machining Feature Model / Process Model / Process Planning / 動作解析 / 路面評価 / 生理信号 / ヒューマンファクタ / 感性評価 / 交通工学・国土計画 / バーチャルリアリティ / 路面特性 / 生体計測 / ドライビングシミュレータ / 気象環境 / メンタルストレス / レーザ計測 / Structure from Motion / メッシュ / 位置合せ / 最適計測方式 / レーザ計測点群 / SfMメッシュ / 最適計測位置推定 / 領域抽出 / 特徴抽出 / レジストレーション / 最適計測 / 特徴量 / 自律分散生産システム / コミニュケーション / 計算機モデル / ファクトリモデル / 加工環境認識 / 生産プロセス / 自律分散 生産システム / 生産情報の誘発機構 / セル・コントロ-ラ / 知的モデル / 加工環境の認識 / 生産プロセスの分散管理 / 生産情報のコミニュケ-ション / 生産情報のコミュニケ-ション / Distributed automated manufacturing / Product model / Cominucation / Computer model / Factory model / Recongnition / Geometric model / manufacturing process / 仕上加工 / 技能 / 熟練工 / 仕上げ面粗さ / 表面傷 / 生産情報 / 自由曲面 / エキスパ-トシステム / 金型仕上熟練工 / 知識工学 / Die and mold / Finishing / Automatic polishing / Skill machinist / Surface roughness / Scratch flaw / Productive data / Expert system / 人工現実感 / 仮想世界 / 多面形立体映像 / 力覚ディスプレイ / 画像データベース / 遠隔地間コミュニケーションシステム / 拡張現実感技術 / 遠隔地間コニュニケーションシステム / 力覚提示 / 空間オブジェクト / 画像補完 / マルチメディアネットワーク / 都市景観 / 仮想倣いシステム / 空間特性 / 3次元画像通信 / インターネット空間 / メディア空間 / Virtual Reality / Virtual World / Multi Screen 3D Display / Force Display / Image Data Base / Remote Communication System / Augmented Reality / 加工特徴モデル / 作業設計 / IDEF0 / Form Shaping Function / Machining Process Model / Operation Planning / 生産設計 / 情報モデル化 / 工作機械モデル / 工具モデル / 加工フィーチャ / 生産資源 / Manufacturing Design / Information Modeling / Machine Tools Model / Cutting Tool Model / Form-Shaping Function / Form Feature / Manufacturing Resource / デジタルセマンテックモデル / 加工フィーチャモデル / CNC加工プロセスモデル / 品質検証モデル / 5軸フライス加工 / メッシュモデル / デジタルセマンテック製品モデル / XML / Functional Model / コミュニケーション / 工具情報モデル / デザインパターン / コミュニケーションシステム / Digital Semantic Model / Product Model / CNC machining process model / Data Quality Assurance Model / 5-axis Milling / Mesh Modeling / 加工シュミレ-タ / Voxel表現 / 干渉チェック / CAD・CAM / 加工シミュレータ / Machining Simulation / Voxel Representation / Cutter collision / Cutter path verification / Machining operation / Set operation of Solid model / Offset operation / エキスパ-ト / 知識獲得 / 研磨加工 / 磨きロボット / 金型磨き作業 / 磨きの自動化 / Expert / Knowledge acquisition / Polishing operation / Polishing robot / Mold and die / レンジファインダ- / レ-ザ測定 / 形状測定 / 素材形状と製品形状の相対位置決定法 / 計測 / レンジファインダー / レーザ測定 / Range Finder / Laser Distance Measuring / Shape Measurement / Recognition of Shape / Forging / Casting / Automatic Set-up / 気管内吸引 / 気道粘膜モデル / プロジェクションマッピング / 視線計測 / シミュレーション / 動作分析 / 3次元レーザ計測 / 画像計測 / 計測品質 / 位置合わせ / 点品質最適化 / 計測データ処理 Less
  • Research Projects

    (28 results)
  • Research Products

    (188 results)
  • Co-Researchers

    (52 People)
  •  点品質最適化に基づく環境3次元計測点群データ処理手法の開発Ongoing

    • Principal Investigator
      伊達 宏昭
    • Project Period (FY)
      2018 – 2020
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18030:Design engineering-related
    • Research Institution
      Hokkaido University
  •  Development of three-dementional simulation to improve instant judgement and technical elaboratenessOngoing

    • Principal Investigator
      コリー 紀代 (伊藤紀代)
    • Project Period (FY)
      2017 – 2019
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Fundamental nursing
    • Research Institution
      Hokkaido University
  •  Creation of hyperrealistic VR environment based on MMS measurement point cloud data and evaluation of traveling road surface by the Kansei information

    • Principal Investigator
      KAWAMURA AKIRA
    • Project Period (FY)
      2014 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Civil engineering project/Traffic engineering
    • Research Institution
      Kitami Institute of Technology
  •  High quality point cloud generation of large-scale environments using various 3D scanners

    • Principal Investigator
      Date Hiroaki
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Hokkaido University
  •  Accessibility evaluation of large-scale as-built environment by the integration of laser-scanning and digital human modelPrincipal Investigator

    • Principal Investigator
      Kanai Satoshi
    • Project Period (FY)
      2014 – 2015
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Social systems engineering/Safety system
    • Research Institution
      Hokkaido University
  •  Fully-automatic build and update technology of 3D as-built equipment model by laser scanningPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Hokkaido University
  •  Accurate process planning of MEMS devices using multi-resolution mesh modelsPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2011 – 2012
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Hokkaido University
  •  Development of a practical virtual ergonomic assessment system using Digital HandPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2009 – 2011
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Hokkaido University
  •  A study on automatic high-quality 3D geometric model generation A study on automatic high-quality 3D geometric model generationA study on automatic high-quality 3D geometric model generation methods from X-ray CT scan dataPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Hokkaido University
  •  デジタルハンドを用いた情報機器の意匠・エルゴノミクス両立デザイン支援の研究Principal Investigator

    • Principal Investigator
      金井 理
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Perception information processing/Intelligent robotics
    • Research Institution
      Hokkaido University
  •  A research on integrated process of solid-model-less styling design and analysis using advanced mesh modeling operationsPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  Advanced Functional Evaluation System for Automatic Machinery enabling to combine Multi-disciplinary SimulationsPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  Research on Digital semantic product model for product life cycle support

    • Principal Investigator
      KISHINAMI Takeshi
    • Project Period (FY)
      2002 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (S)
    • Research Field
      情報システム学(含情報図書館学)
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  Unified 3D Design Environment using Multi-resolution Mesh ModelingPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Hokkaido University
  •  A study of representation of a machining knowledge and a manufacturing resource model for an integrated manufacturing design system

    • Principal Investigator
      KISHINAMI Takeshi
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  A Seamless Environment for developing Massively Distributed Control Software of Factory AutomationPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  A study on the Digital Watermarking and Copyright Protection Method for 3D Geometric ModelsPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  Formal Representation of Machining Process and Systematizing of Machining Feature Model

    • Principal Investigator
      KISHINAMI Takeshi
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  A study on the optimal disassembly process planning for the consumer products based on the evaluation of recyclability and disposabilityPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  人工現実感を応用した自由曲面CAD/CAMシステムの開発Principal Investigator

    • Principal Investigator
      金井 理
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Hokkaido University
  •  A Method of Construction on Virtual World

    • Principal Investigator
      HIROSE Michitaka
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Research Institution
      University of Tokyo
  •  Research on the Flexible Adjustment Cell for Mechanical AssemblyPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Institute of Technology
  •  Research on Integrated Process Planning System for AssemblyPrincipal Investigator

    • Principal Investigator
      KANAI Satoshi
    • Project Period (FY)
      1990 – 1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Institute of Technology
  •  Intelligent Model and Communication for Distributed Automated Manufacturing System

    • Principal Investigator
      KISHINAMI Takeshi
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      機械工作
    • Research Institution
      Hokkaido University
  •  Development and Construction of the Expert System for Finishing Operation of dies and Molds.

    • Principal Investigator
      SAITO Katsumasa
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      機械工作
    • Research Institution
      Hokkaido University
  •  A Study of Geometra Machining Simulator

    • Principal Investigator
      KISHINAMI T.
    • Project Period (FY)
      1988 – 1989
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Hokkaido University
  •  Analysis and Automation of Polishing Motion of a Skilled Machinist by Handwork for Mold and Die

    • Principal Investigator
      MIYOSHI Takashi
    • Project Period (FY)
      1988 – 1989
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Hokkaido University
  •  Development of Automatic Set-Up Equipment for Large Forging and Casting

    • Principal Investigator
      KISHINAMI T
    • Project Period (FY)
      1988 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B).
    • Research Field
      機械工作
    • Research Institution
      Hokkaido University

All 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 Other

All Journal Article Presentation Book Patent

  • [Book] デジタルスタイルデザイン(共著)2008

    • Author(s)
      金井理
    • Publisher
      海文堂
    • Data Source
      KAKENHI-PROJECT-19650043
  • [Book] Chapter 8 : Object-oriented Design Pattern Approach to Seamless Modeling, Simulation and Implementation of Distributed Control Systems Knowledge and Skill Chains in Engineering and Manufacturing2005

    • Author(s)
      Satoshi Kanai et al.
    • Total Pages
      377
    • Publisher
      Springer
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Book] Knowledge and Skill Chains in Engineering and Manufacturing, 第8章"Object-oriented Design Pattern Approach to Seamless Modeling, Simulation and Implementation of Distributed Control Systems"部分を執筆2005

    • Author(s)
      Satoshi Kanai
    • Total Pages
      377
    • Publisher
      Springer
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Book] Knowledge and Skill Chains in Engineering and Manufacturing,第8章"Object-oriented Design Pattern Approach to Seamless Modeling"部分を執筆2005

    • Author(s)
      Satoshi Kanai, Toyoaki Tomura, Kiyoshi Uehiro, Susumu Yamamoto
    • Total Pages
      377
    • Publisher
      Springer
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Tripping risk evaluation system based on human behavior simulation in laser-scanned 3D as-is environments2018

    • Author(s)
      Maruyama Tsubasa、Kanai Satoshi、Date Hiroaki
    • Journal Title

      Automation in Construction

      Volume: 85 Pages: 193-208

    • DOI

      10.1016/j.autcon.2017.10.011

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26289167
  • [Journal Article] Automatic registration of MLS point clouds and SfM meshes of urban area2016

    • Author(s)
      Reiji Yoshimura, Hiroaki Date, Satoshi Kanai, Ryohei Honma, Kazuo Oda, Tatsuya Ikeda
    • Journal Title

      Geo-spatial Information Science

      Volume: 19(3) Pages: 171-181

    • DOI

      10.1080/10095020.2016.1212517

    • NAID

      120006360095

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Journal Article] Vision-based Wayfinding Simulation of Digital Human Model in Three Dimensional As-Is Environment Models and Its Application to Accessibility Evaluation2016

    • Author(s)
      Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date
    • Journal Title

      Proc. of ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences

      Volume: 印刷中

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Journal Article] Motion-capture-based Walking Simulation of Digital Human Adapted to Laser-scanned 3D As-is Environments for Accessibility Evaluation2016

    • Author(s)
      Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date, Mitsunori Tada
    • Journal Title

      Journal of Computational Design and Engineering

      Volume: 未定

    • DOI

      10.1016/j.jcde.2016.03.001

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15J01552, KAKENHI-PROJECT-26560168
  • [Journal Article] OPTIMAL SETUP OF A TERRESTRIAL LASER SCANNER FOR CAPTURING PIPING OBJECTS IN PLANTS2015

    • Author(s)
      Satoshi Kanai, Shin-ya Yamanishi, Hiroaki Date
    • Journal Title

      Proceeding of the 2nd International Conference on Civil and Building Engineering Informatics

      Volume: なし

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] MoCap-Based Adaptive Human-Like Walking Simulation in Laser-Scanned Large-Scale as-Built Environments2015

    • Author(s)
      Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date
    • Journal Title

      Lecture Notes in Computer Science

      Volume: 9185 Pages: 193-204

    • DOI

      10.1007/978-3-319-21070-4_20

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Journal Article] Improvement of 3D Monte-Carlo localization using a depth camera and terrestrial laser scanner2015

    • Author(s)
      Satoshi Kanai, Ryu Hatakeyama, Hiroaki Date
    • Journal Title

      Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci.

      Volume: XL-4/W5 Pages: 61-66

    • DOI

      10.5194/isprsarchives-xl-4-w5-61-2015

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Journal Article] IMPROVEMENT OF 3D MONTE CARLO LOCALIZATION USING A DEPTH CAMERA AND TERRESTRIAL LASER SCANNER2015

    • Author(s)
      Satoshi Kanai, Ryu Hatakeyama, Hiroaki Date
    • Journal Title

      Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci.

      Volume: 未定

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Efficient Large-Scale as-Built Environment Modeling Based on 3D Laser-Scanning for Human Walking Simulation2014

    • Author(s)
      Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date
    • Journal Title

      Proc. of Digital Human Modeling Symposium 2014

      Volume: なし Pages: 38-38

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Journal Article] A Development of a Basic Walking Simulation in As-built Environments by Combining Digital Human Model with Large-scale 3-Dimensional Laser scan2014

    • Author(s)
      丸山翼,金井理,伊達宏昭
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 80 Issue: 8 Pages: 755-762

    • DOI

      10.2493/jjspe.80.755

    • NAID

      130004679117

    • ISSN
      0912-0289, 1882-675X
    • Language
      Japanese
    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Journal Article] A Rendering Method of Laser Scanned Point Clouds of Large Scale Environments by Adaptive Graphic Primitive Selection2014

    • Author(s)
      Hiroaki Date, Takashi Maeno, Satoshi Kanai
    • Journal Title

      Computer-Aided Design and Applications

      Volume: 11 Pages: 685-693

    • DOI

      10.1080/16864360.2014.914386

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] As-built modeling of piping system from terrestrial laser-scanned point clouds using normal-based region growing2014

    • Author(s)
      Kazuaki Kawashima, Satoshi Kanai, Hiroaki Date
    • Journal Title

      Journal of Computational Design and Engineering

      Volume: 1 Pages: 13-26

    • DOI

      10.7315/jcde.2014.002

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] 大規模三次元環境の認識・モデル化技術2014

    • Author(s)
      金井 理
    • Journal Title

      光アライアンス

      Volume: 25 Pages: 48-52

    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Finding the next-best scanner position for as-built modeling of piping systems2014

    • Author(s)
      Kazuaki Kawashima, Shin-ya Yamanishi, Satoshi Kanai, Hiroaki Date
    • Journal Title

      ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences

      Volume: XL-5 Pages: 313-320

    • DOI

      10.5194/isprsarchives-xl-5-313-2014

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-24360057, KAKENHI-PROJECT-26420073
  • [Journal Article] Registration of Point Clouds of Large-Scale Environments using Point Projection Images2014

    • Author(s)
      Hiroaki Date, Yusuke Matsuyama, Satoshi Kanai
    • Journal Title

      Proceedings of The 15th International Conference on Precision Engineering

      Volume: なし Pages: 562-563

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Decomposing Scanned Assembly Meshes based on Periodicity Recognition and Its Application to Kinematic Simulation Modeling2013

    • Author(s)
      Tomohiro Mizoguchi
    • Journal Title

      Computer-aided Design

      Volume: (印刷中) Pages: 829-842

    • DOI

      10.1016/j.cad.2011.02.001

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067, KAKENHI-PROJECT-23656112, KAKENHI-PROJECT-24360057
  • [Journal Article] 大規模環境の3次元計測と認識・モデル化技術の現状2013

    • Author(s)
      金井 理
    • Journal Title

      精密工学会誌

      Volume: 79

    • NAID

      130003384972

    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] 大規模環境のレーザ計測に基づくas-built BIM 生成技術の動向2013

    • Author(s)
      金井 理
    • Journal Title

      光技術コンタクト

      Volume: 51 Pages: 3-9

    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Detection and Classification of Pole-like Objects from Mobile laser Scanning Data of Urban Environments2013

    • Author(s)
      Hiroki Yokoyama, Hiroaki Date, Satoshi kanai, Hiroshi Takeda
    • Journal Title

      International Journal of CAD/CAM

      Volume: 13 Pages: 31-40

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Simulating a Walk of Digital Human Model Directly in Massive 3D Laser-Scanned Point Cloud of Indoor Environments2013

    • Author(s)
      Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date
    • Journal Title

      Lecture Notes in Computer Science

      Volume: 8026 Pages: 366-375

    • DOI

      10.1007/978-3-642-39182-8_43

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Automatic recognition of piping system from laser scanned point clouds using normal-based region growing2013

    • Author(s)
      Kazuaki Kawashima, Satoshi Kanai, Hiroaki Date
    • Journal Title

      ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci.

      Volume: II-5/W2 Pages: 121-126

    • DOI

      10.5194/isprsannals-ii-5-w2-121-2013

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Accurate registration of MMS point clouds of urban areas using trajectory2013

    • Author(s)
      Shungo Takai, Hiroaki Date, Satoshi Kanai, Yasuhito Niina, Kazuo Oda, Tatsuya Ikeda
    • Journal Title

      ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci.

      Volume: II-5/W2 Pages: 277-282

    • DOI

      10.5194/isprsannals-ii-5-w2-277-2013

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Robust and Exhaustive Method for Symmetry Detection from Scanned Meshes2013

    • Author(s)
      Tomohiro Mizoguchi,Satoshi Kanai, Hiroaki Date, Hiroyuki Tanaka
    • Journal Title

      Journal of Advanced Mechanical Design, Systems, and Manufacturing

      Volume: 7 Issue: 5 Pages: 862-875

    • DOI

      10.1299/jamdsm.7.862

    • NAID

      130003384455

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Journal Article] Appearance preserving simplification of 3D CAD model with large-scale assembly structures2012

    • Author(s)
      Satoshi Kanai
    • Journal Title

      International Journal on Interactive Design and Manufacturing

      Volume: (印刷中) Pages: 139-154

    • DOI

      10.1007/s12008-012-0145-0

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067, KAKENHI-PROJECT-23656112, KAKENHI-PROJECT-24360057
  • [Journal Article] Feature-based 3D Process Planning for MEMS Fabrication2012

    • Author(s)
      Satoshi Kanai, Takayuki Shibata and Takahiro Kawashima
    • Journal Title

      Proceedings of 2012 Asian Conference on Design and Digital Engineering

    • NAID

      130007673959

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Journal Article] Constructing a Finger Biomechanical Model for Virtual Ergonomic Assessment in Digital Hand2011

    • Author(s)
      Yasutomo Shimizu, Hiroaki Date and Satoshi Kanai
    • Journal Title

      Proceedings of 2011 Asian Conference on Design and Digital Engineering 2011

      Volume: Vol.1 Pages: 543-547

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] Estimating ease of single-fingered operations of hand-held appliances with digital hand2011

    • Author(s)
      Satoshi Kanai and Seiya Suzuki
    • Journal Title

      Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] Estimating ease of single-fingered operations of hand-held appliances with digital hand2011

    • Author(s)
      Satoshi Kanai
    • Journal Title

      Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference

      Volume: (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] 3次元CADを活用した情報機器ユーザインタフェースのプロトタイピングとユーザビリティ評価2010

    • Author(s)
      金井理
    • Journal Title

      設計工学

      Volume: 45 Pages: 319-326

    • NAID

      10026793296

    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] Database-Driven Grasp Synthesis and Ergonomic Assessment for Handheld Product Design2009

    • Author(s)
      Keisuke Kawaguchi, Yui Endo and Satoshi Kanai
    • Journal Title

      Lecture Notes in Computer Science

      Volume: Vol.5620/2009 Pages: 642-652

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] Region Growing/ Merging を用いた効率的なセグメンテーション2009

    • Author(s)
      溝口知広, 伊達宏昭, 金井理
    • Journal Title

      精密工学会誌 Vol.74, No.7

      Pages: 752-759

    • URL

      http://ci.nii.ac.jp/naid/110006827298

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Journal Article] デジタルハンドとプロダクトモデルとの統合によるエルゴノミック評価システムの開発(第2報)-把持容易性評価機能および把持姿勢の最適化手法-2009

    • Author(s)
      遠藤維, 金井理, 岸浪建史, 宮田なつき, 河内まき子, 持丸正明
    • Journal Title

      精密工学会誌

      Volume: Vol.75 No.4 Pages: 548-553

    • NAID

      130000421635

    • URL

      http://ci.nii.acjp/naid/110006613732.

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] 3D digital prototyping and usability enhancement of information appliances based on UsiXML2009

    • Author(s)
      Satoshi Kanai
    • Journal Title

      International Journal on Interactive Design and Manufacturing Vol.3

      Pages: 201-222

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] ICPとリージョングローイングを組み合わせた機械部品計測メッシュのユークリッド対称性認識手法2009

    • Author(s)
      溝口知広, 金井理
    • Journal Title

      精密工学会誌 Vol.75, No.4

      Pages: 545-556

    • NAID

      130000421636

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Journal Article] Optimization-Based Grasp Posture Generation Method of Digital Hand for Virtual Ergonomic Assessment2009

    • Author(s)
      Yui Endo(1番目), Satoshi Kanai (2番目), Masaaki Mochimaru(5番目), 他3名
    • Journal Title

      SAE International Journal of Passenger Cars-Electronic and Electrical Systems

      Volume: Vol.1 No.1 Pages: 590-598

    • DOI

      10.4271/2008-01-1902

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Journal Article] Flexible Control of Multimaterial Tetrahedral Mesh Propertiesby Using Multiresolution Techniques2009

    • Author(s)
      Hiroaki Date, So Noguchi, Masahiko Onosato, Satoshi Kanai
    • Journal Title

      IEEETransactions on Magnetics Vol.45, No.3

      Pages: 1352-1355

    • URL

      http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?isnumber=4787272&arnumber=4787349&count=238&index=105

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Journal Article] Euclidean Symmetry Detection from Scanned Meshes based on a Combination of ICP and Region Growing Algorithm2008

    • Author(s)
      Tomohiro Mizoguchi and Satoshi Kanai
    • Journal Title

      Proc. of ASME/DETC (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Journal Article] デジタルプロトタイピングを活用した情報機器の操作シミュレーションとユーザビリティ評価2008

    • Author(s)
      金井理
    • Journal Title

      精密工学会誌 74

      Pages: 131-134

    • NAID

      110006613720

    • Data Source
      KAKENHI-PROJECT-19650043
  • [Journal Article] Recognizing Periodicities on 3D Scanned Meshes Based on Indexed-ICPAlgorithm,2008

    • Author(s)
      Daisuke Kondo, Tomohiro Mizoguchi and Satoshi Kanai
    • Journal Title

      Proc. of Virtual Concept(CD-ROM), IDMME_35

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Journal Article] デジタルハンドを用いた仮想エルゴノミック評価2008

    • Author(s)
      金井理
    • Journal Title

      機械設計 52

      Pages: 59-64

    • NAID

      40015898790

    • Data Source
      KAKENHI-PROJECT-19650043
  • [Journal Article] Quasi-optimal mesh segmentation via region growing/merging2007

    • Author(s)
      Tomohiro Mizoguchi, Hiroaki Date, and Satoshi Kanai
    • Journal Title

      Proc. of ASME/DETC (CD-ROM) DETC-2007-35157

    • URL

      http://store.asme.org/product.asp?catalog%5Fname=Conference+Papers&category%5Fname=&product%5Fid=DETC2007%2D35171

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Journal Article] Content-based 3D Mesh Model Retrieval from Hand-written Sketch2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design Vol. 2(CD-ROM)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A multi-disciplinary distributed simulation environment for mechatronic system design enabling Hardware-in-the-Loop Simulation based on HLA2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design Vol.2(CD-ROM)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Content-based 3D Mesh Model Retrieval from Hand-written Sketch,2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design Vol.2(CD-ROM)

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A multi-disciplinary distributed simulation environment for mechatronic system design enabling Hardware-in-the-Loop Simulation based on HLA2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design Vol. 2(CD-ROM)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Digital Usability Assessment for Information Appliances using User-Interface operable 3D Digital Mock-up2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design Vol. 2(CD-ROM)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Digital Usability Assessment for Information Appliances using User-Interface operable 3D Digital Mock-up2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design Vol.2(CD-ROM)

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A Multiresolution Mesh Processing System for Efficient CAE2006

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      Proc. SICE-ICCAS2006

      Pages: 5550-5554

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Digital Usability Assessment for Information Appliances using User-Interface operable 3D Digital Mock-up2006

    • Author(s)
      Satoshi Kanai
    • Journal Title

      Research in Interactive Design Vol.2(CD-ROM)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A Parametric Deformation Method for Mesh Models based on Barycentric Coordinates2006

    • Author(s)
      Gaku Mizuno, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proceedings of VIIP2006

      Pages: 359-364

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Flexible Feature and Resolution Control of Triangular Meshes2006

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      Proceedings of VIIP2006

      Pages: 319-324

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Parametric Deformation of Mesh Models for Efficient CAE2006

    • Author(s)
      Gaku Mizuno, Hiroaki Date, Satoshi Kanai, Masahiko Onosato
    • Journal Title

      Proc. SICE-ICCAS2006

      Pages: 5562-5566

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Content-based 3D Mesh Model Retrieval from Hand-written Sketch2006

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Research in Interactive Design VoI.2(CD-ROM)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Segmentation of Scanned Mesh into Analytic Surfaces Based on Robust Curvature Estimation and Region Growing2006

    • Author(s)
      Tomohiro Mizoguchi, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Lecture Notes in Computer Science, Springer Berlin/Heidelberg 4077

      Pages: 644-654

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Segmentation of Scanned Mesh into Analytic Surfaces Based on Robust Curvature Estimation and Region Growing Lecture Notes in Computer Science2006

    • Author(s)
      Tomohiro Mizoguchi, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Springer Berlin/Heidelberg 4077/2006

      Pages: 44-654

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Mesh Simplification and Adaptive LOD for Finite Element mesh Generation2006

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      International Journal of CAD/CAM 6(1)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] High-Quality and Property Controlled Finite Element Mesh Generation from Triangular Meshes using Multiresolution Technique2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      ASME Transactions, Journal of Computing & Information Science in Engineering Vol.5 No.2(掲載決定済)

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] 分散制御システムの動的挙動モデリングのためのオブジェクト指向デザインパターンに関する研究2005

    • Author(s)
      戸村豊明, 金井理, 岸浪建史, 上広 清, 山元 進
    • Journal Title

      精密工学会誌 71巻,2号

      Pages: 379-383

    • NAID

      110001824138

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Feature Edge Extraction from Mesh Model based on Wide Range Normal Evaluation and Modified Watershed Method2005

    • Author(s)
      Tomohiro Mizoguchi, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc.of 1st International Conference on Geometric Modeling, Visualization and Graphics

      Pages: 1610-1613

    • NAID

      110002973611

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] A Robust and Accurate Fitting Algorithm of a Loop Subdivision Surface for a Complex and High-Density Point Cloud2005

    • Author(s)
      Yuri Endo, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proceedings of Digital Engineering Workshop,

      Pages: 156-163

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] BehaveView プラネットフォームへのユーザインターフェース挙動検証機能の統合2005

    • Author(s)
      菊地慶仁, 金井 理, 岸浪建史, 坂田豊, 菊地幸明
    • Journal Title

      ヒューマンインターフェースシンポジウム2005論文集

      Pages: 281-286

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A New Bilateral Mesh Smoothing Method by Recognizing Features2005

    • Author(s)
      Takafumi Shimizu, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc. Ninth International Conference on Computer Aided Design and Computer Graphics

      Pages: 281-286

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] 分散制御システムの動的挙動モデリングのためのオブジェクト指向デザインパターンに関する研究2005

    • Author(s)
      戸村豊明, 金井理, 岸浪建史, 上広清, 山元進
    • Journal Title

      精密工学会誌 71(3)

      Pages: 379-383

    • NAID

      110001824138

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Mesh Simplification and Adaptive LOD for Finite Element Mesh Generation2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      Proc. Ninth International Conference on Computer Aided Design and Computer Graphics

      Pages: 339-344

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Mesh Simplification and Adaptive LOD for Finite Element Mesh Generation2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      Proc.Ninth International Conference on Computer Aided Design and Computer Graphics

      Pages: 339-344

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] 細分化と簡略化に基づく三角形メッシュの品質改善2005

    • Author(s)
      伊達宏昭, 金井 理, 岸浪建史, 西垣一朗, 土肥高幸
    • Journal Title

      精密工学会誌 71巻,3号

      Pages: 223-227

    • NAID

      10014382617

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Mesh Simplification and Adaptive LOD for Finite Element Mesh Generation2005

    • Author(s)
      HiroakiDate, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki
    • Journal Title

      Proc.9th International Conference on Computer Aided Design and Computer Graphics

      Pages: 339-344

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A New Bilateral Mesh Smoothing Method by Recognizing Features,2005

    • Author(s)
      Takafumi Shimizu, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc.Ninth International Conference on Computer Aided Design and Computer Graphics

      Pages: 281-286

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Low-cost and rapid prototyping of UI-embedded mock-ups using RFID and its application to usability testing2005

    • Author(s)
      S.Horiuchi, S.Kanai, T.Kishinami, S.Hosoda, Y.Ohshima, Y.Shiroma
    • Journal Title

      Proceedings of HII International 2005 (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Textured Shape Design using Detail extraction based on Mesh Smoothing and Flattening2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc. of 6th International Conference on Computer-aided Industrial Design and Conceptual Design

      Pages: 146-151

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] 広域的法線評価と改良Watershed法に基づくメッシュモデルの特徴稜線抽出手法2005

    • Author(s)
      溝口知弘, 伊達宏昭, 金井理, 岸浪建史
    • Journal Title

      情報処理学会論文誌 46(12)

      Pages: 3175-3187

    • NAID

      110002973611

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A New Bilateral Mesh Smoothing Method by Recognizing Features2005

    • Author(s)
      Takafumi Shimizu, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc.9th International Conference on Computer Aided Design and Computer Graphics

      Pages: 281-286

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Feature Edge Extraction from Mesh Model based on Wide Range Normal Evaluation and Modified Watershed Method2005

    • Author(s)
      Tomohiro Mizoguchi, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc. of 1st International Conference on Geometric Modeling, Visualization and Graphics

      Pages: 1610-1613

    • NAID

      110002973611

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] 細分化と簡略化に基づく三角形メッシュの品質改善2005

    • Author(s)
      伊達宏昭, 金井 理, 岸浪建史, 西垣一朗, 土肥高幸
    • Journal Title

      精密工学会誌 71(2)

      Pages: 223-227

    • NAID

      10014382617

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] High-Quality and Property Controlled Finite Element Mesh Generation from Triangular Meshes using the Multiresolution Technique2005

    • Author(s)
      Hiroaki Date, SatoshiKANAI, Takeshi Kishinami, IchiroNishigaki, Takayuki Dohi
    • Journal Title

      Trans. of the ASME Journal of Computing and Information Science in Engineering Vol.5

      Pages: 266-276

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Textured Shaped Design using Detail extraction based on Mesh Smoothing and Flattening2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takashi Kishinami
    • Journal Title

      Pro. of 6th International Conference on Computer-aided Industrial Design and Conceptual Design

      Pages: 146-151

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] A New Virtual Design Mockup for Digital Devices with Operable GUI using an RFID chip and Mixed Reality2005

    • Author(s)
      Soh Horiuchi, Satoshi Kanai, Takeshi Kishinami, Shoichi Hosoda, Yasuaki Ohshima, Yoshiyuki Shiroma
    • Journal Title

      Proceeding of Virtual Concept 2005, VC2005154 (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Feature Edge Extraction from Mesh Model based on Wide Range Normal Evaluation and Modified Watershed Method2005

    • Author(s)
      Tomohiro Mizoguchi, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc.of 1st International Conference on Geometric Modeling, Visualization and Graphics

      Pages: 1610-1613

    • NAID

      110002973611

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Textured Shape Design using Detail extraction based on Mesh Smoothing and Flattening2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proc.of 6th International Conference on Computer-aided Industrial Design and Conceptual Design

      Pages: 146-151

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] 細分化と簡略化に基づく三角形メッシュの品質改善2005

    • Author(s)
      伊達宏昭, 金井 理, 岸浪建史, 西垣一朗, 土肥高幸
    • Journal Title

      精密工学会誌 71(2)

      Pages: 223-227

    • NAID

      10014382617

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Mesh Quality Improvement based on Subdivision and simplification2005

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki, Takayuki Dohi
    • Journal Title

      Journal of the Japan Society for Precision Engineering 71(2)

      Pages: 223-227

    • NAID

      10014382617

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] 特徴稜線部への高精度フィッティングが可能な細分割曲面リバースエンジニアリング2005

    • Author(s)
      遠藤 維, 伊達宏昭, 金井 理, 岸浪建史
    • Journal Title

      精密工学会誌 71(9)

      Pages: 1168-1172

    • NAID

      110001794647

    • Data Source
      KAKENHI-PROJECT-17360056
  • [Journal Article] Multi-disciplinary Distributed Simulation for designing IT Devices by Integrating off-the-shelf CAX systems based on HLA2004

    • Author(s)
      Satoshi KANAI, Takeshi Kishinami, Tasumi Tada
    • Journal Title

      Proceedings of Fall 2004 Simulation Interoperability Workshop 04F-SIW

      Pages: 315-325

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Multi-disciplinary Distributed Simulation for designing IT Devices by Integrating off-the-shelf CAX systems based on HLA2004

    • Author(s)
      Satoshi KANAI
    • Journal Title

      Proceedings of Fall 2004 Simulation Interoperability Workshop 04F-SIW

      Pages: 315-325

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] MULTIRESOLUTION FINITE ELEMENT MESH GENERATION2004

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki, Takayuki Dohi
    • Journal Title

      Proceedings of DETC' 04 ASME 2004 Design Engineering Technical Conferences and Computers and Information in Engineering Conference DETC2004-57663

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Multiresolution Finite Element Mesh Generation2004

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki, Takayuki Dohi
    • Journal Title

      Proceedings of 2004 ASME International Design Engineering Technical

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] A Prototyping System for Surface Textured Shapes using Triangular Mesh Modeling and Stereo Lithography2004

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Masayoshi
    • Journal Title

      Proceedings of 2004 Japan-USA Symposium on Flexible Automation

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Mesh Quality Improvement based on Mesh Subdivision and Simplification2004

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proceedings of 3D Modelling 2004

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Multi-disciplinary Distributed Simulation for Designing IT Devices by Integrating off-the-shelf CAX Systems based on HLA2004

    • Author(s)
      Satoshi Kanai
    • Journal Title

      Proceedings of Fall 2004 Simulation Interoperability Workshop

      Pages: 315-325

    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Multi-disciplinary Distributed Simulation for designing IT Devices by Integrating off-the-shelf CAX systems based on HLA2004

    • Author(s)
      Satoshi KANAI et al.
    • Journal Title

      Proc.of Fall 2004 Simulation Interoperability Workshop 04F-SIW

      Pages: 315-325

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Tetrahedral Mesh Generation Method for Finite Element Analysis and Finite Element Analysis System using its Method.2004

    • Author(s)
      Satoshi Kanai et al.
    • Journal Title

      Japanese Patent Application No.2004-252933

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] A PARALLEL DISCRETE EVENT SIMULATION METHODOLOGY OF DISTRIBUTED CONTROL SYSTEMS USING OBJECT-ORIENTED PROTOCOL MODEL AND TIME WARP MECHANISM2004

    • Author(s)
      Tokyoaki Tomura, Satoshi KANAI, Takeshi Kisinami
    • Journal Title

      Proceedings of 2004 Japan-USA Symposium on Flexible Automation

    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] A Robust and Accurate Fitting Algorithm of a loop Subdivision Surface for a Complex and High-Density Point Cloud2004

    • Author(s)
      Yui Endo, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proceedings of Design Engineering Workshop2005/5th Japan-Korea CAD.CAM Workshop

      Pages: 156-163

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] Tetrahedral Mesh Generation and its Program2004

    • Author(s)
      Satoshi Kanai et al.
    • Journal Title

      Japanese Patent Application No.2004-252444

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] A Robust, Accurate and Flexible Fitting Algorithms of Subdivision Surface for Point Cloud in Industrial Design Use2004

    • Author(s)
      Yui Endo, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Proceedings of 3D Modelling 2004

    • NAID

      130004655549

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] メッシュモデルのLOD制御技術とそのデジタルエンジニアリングへの応用2003

    • Author(s)
      金井 理
    • Journal Title

      精密工学会誌 69巻・4号

      Pages: 83-86

    • NAID

      110001373519

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] HLA/RTI-based Scalable Distributed Virtual Prototyping Environment for Embedded System Design2003

    • Author(s)
      Satoshi Kanai
    • Journal Title

      Proceedings of Virtual Concept 2003

      Pages: 100-107

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] HLA/RTI-based Scalable Distributed Virtual Prototyping Environment for Embedded System Design2003

    • Author(s)
      Satoshi Kanai et al.
    • Journal Title

      Proc.of Virtual Concept 2003

      Pages: 100-107

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] Triangular Mesh Modeling of Surface-detail-integrated shape using parameterization2003

    • Author(s)
      Hiroaki Date, Satoshi Kanai, Takeshi Kishinami
    • Journal Title

      Journal of the Japan Society for Precision Engineering 69(4)

      Pages: 581-585

    • NAID

      110001373537

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Journal Article] LOD Control for Mesh Models and its Application to Digital Engineering (Survey)2003

    • Author(s)
      Satoshi Kanai et al.
    • Journal Title

      Journal of JSPE (in Japanese) Vol.69, No.4

      Pages: 83-86

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Journal Article] A Rendering Method of Laser Scanned Point Clouds of Large Scale Environments by Adaptive Graphic Primitive Selection

    • Author(s)
      Hiroaki Date, Takashi Maehama, Satoshi Kanai
    • Journal Title

      Computer Aided Design and Applications

      Volume: (掲載決定済み,掲載号未定)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Journal Article] Quality Improvement of Deformed Mesh Models for FEA by Density and Geometry-recovering Phased ODT Smoothing

    • Author(s)
      Hiroki Maehama, Hiroaki Date and Satoshi Kanai
    • Journal Title

      Computer Aided Design and Applications

      Volume: (掲載決定済み,掲載号未定)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Patent] 柱状物体抽出方法、柱状物体抽出プログラム、および柱状物体抽出装置2012

    • Inventor(s)
      金井理, 伊達宏昭, 横山博貴, 森哲平, 武田浩志
    • Industrial Property Rights Holder
      国際航業株式会社,北海道大学
    • Industrial Property Number
      2012-186830
    • Filing Date
      2012-08-27
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Patent] 電子情報データ埋め込み方法及び抽出方法並びに電子情報データ埋め込み装置及び抽出装置,並びに前記方法のプログラムを記録した記録媒体2008

    • Inventor(s)
      金井理, 伊達宏昭, 青木潔, 遠藤明彦
    • Industrial Property Rights Holder
      金井理, (株)エクサ
    • Filing Date
      2008-09-26
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] 電子情報埋め込み方法およびその抽出方法, 電子情報埋め込み装置およびその抽出装置, 並びにそのプログラム2008

    • Inventor(s)
      金井理中, 根達英
    • Industrial Property Rights Holder
      国際航業
    • Filing Date
      2008-08-29
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] 電子情報データ埋め込み方法及び抽出方法並びに電子情報データ埋め込み装置及び抽出装置,並びに前記方法のプログラムを記録した記録媒体2008

    • Inventor(s)
      金井理, 伊達宏昭, 青木潔, 遠藤明彦
    • Industrial Property Rights Holder
      金井理, (株)エクサ
    • Acquisition Date
      2008-09-26
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] ユークリッド対称性認識システム, 方法及びプログラム2008

    • Inventor(s)
      金井理, 溝口知広
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2008-000017
    • Filing Date
      2008-07-03
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] ユークリッド対称性認識システム, 方法及びプログラム2008

    • Inventor(s)
      金井理, 溝口知広
    • Industrial Property Rights Holder
      北海道大学
    • Filing Date
      2008-07-03
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] 電子情報埋め込み方法およびその抽出方法,電子情報埋め込み装置およびその抽出装置,並びにそのプログラム2008

    • Inventor(s)
      金井理, 中根達英
    • Industrial Property Rights Holder
      国際航業(株)
    • Acquisition Date
      2008-08-29
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] Electronic information embedding method and extracting method, electronic information burying apparatus and extracting apparatus, and programs therefor2008

    • Inventor(s)
      Kanai Satoshi, Nakane Tatsuhide, Kurisaki Naoko, Kitamura Ikuhiro
    • Industrial Property Rights Holder
      Kokusai Kogyo Co., Ltd.
    • Acquisition Date
      2008-05-06
    • Overseas
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Patent] 解析曲面セグメンテーション装置,方法,プログラム及び記録媒体2007

    • Inventor(s)
      金井 理, 岸浪建史, 溝口知広, 伊達宏昭
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2007-015473
    • Filing Date
      2007-01-19
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Patent] 凸多面体に対する重心座標を用いた自由形状変形システム2007

    • Inventor(s)
      金井 理, 岸浪建史, 伊達宏昭, 小野里雅彦, 水野 学
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2007-017599
    • Filing Date
      2007-01-29
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Patent] 凸多面体に対する重心座標を用いた自由形状変形システム2006

    • Inventor(s)
      金井 理, 岸浪 建史, 伊達 宏昭, 水野 学
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2006-053163
    • Filing Date
      2006-02-28
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Patent] メッシュモデル・ソリッドモデル変換装置、方法及びプログラム2006

    • Inventor(s)
      金井 理, 岸浪 建史, 溝口 知弘, 伊達 宏昭
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2006-035719
    • Filing Date
      2006-02-13
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Patent] メッシュモデル生成方法2006

    • Inventor(s)
      金井 理, 伊達 宏昭, 西垣 一朗
    • Industrial Property Rights Holder
      北海道大学, (株)日立製作所
    • Industrial Property Number
      2006-052670
    • Filing Date
      2006-02-28
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Patent] 形状特徴を認識・保存するメッシュの測定ノイズ除去アルゴリズム及びノイズ除去装置2005

    • Inventor(s)
      金井 理, 伊達 宏昭, 清水 貴文
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2005-322853
    • Filing Date
      2005-11-07
    • Data Source
      KAKENHI-PROJECT-17360056
  • [Patent] 有限要素解析用の四面体メッシュの生成方法及びその方法を用いた有限要素解析システム2004

    • Inventor(s)
      金井 理, 伊達 宏昭, 岸浪 建史, 西垣 一朗
    • Industrial Property Rights Holder
      北海道大学, 日立製作所
    • Industrial Property Number
      2004-252933
    • Filing Date
      2004-08-31
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Patent] 四面体メッシュ生成方法及びプログラム2004

    • Inventor(s)
      金井 理, 伊達 宏昭, 岸浪 建史, 西垣 一朗
    • Industrial Property Rights Holder
      北海道大学, 日立製作所
    • Industrial Property Number
      2004-252444
    • Filing Date
      2004-08-31
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Patent] 四面体メッシュ生成方法及びプログラム2004

    • Inventor(s)
      金井 理, 伊達 宏昭, 岸浪 建史
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2004-252444
    • Filing Date
      2004
    • Acquisition Date
      2004-08-31
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Patent] 四面体メッシュ生成方法及びプログラム2004

    • Inventor(s)
      金井 理, 伊達 宏昭, 岸浪 建史
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2004-252444
    • Filing Date
      2004-08-31
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Patent] GUIプログラミングインターフェース2004

    • Inventor(s)
      岸浪 建史, 金井 理, 漆原 映彦
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2004-052471
    • Filing Date
      2004-01-25
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Patent] 有限要素解析用の四面体メッシュの生成方法及びその方法を用いた有限要素解析システム2004

    • Inventor(s)
      金井 理, 伊達 宏昭, 岸浪 建史
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2004-252933
    • Filing Date
      2004-08-31
    • Data Source
      KAKENHI-PROJECT-15560089
  • [Patent] 有限要素解析用の四面体メッシュの生成方法及びその方法を用いた有限要素解析システム2004

    • Inventor(s)
      金井 理, 伊達 宏昭, 岸浪 建史
    • Industrial Property Rights Holder
      北海道大学
    • Industrial Property Number
      2004-252933
    • Filing Date
      2004
    • Acquisition Date
      2004-08-31
    • Data Source
      KAKENHI-PROJECT-14102032
  • [Presentation] Quality Prediction of Dense Points Generated by Structure from Motion for High-Quality and Efficient As-Is Model Reconstruction2019

    • Author(s)
      Ryota Moritani, Satoshi Kanai, Hiroaki Date, Yasuhito Niina, Ryohei Honma
    • Organizer
      ISPRS Geospatial Week 2019
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18K03896
  • [Presentation] TLS Point Cloud Registration Based on ICP Algorithm Using Point Quality2019

    • Author(s)
      Hiroaki Date, Eisuke Wakisaka, Yoshinori Moribe, Satoshi Kanai
    • Organizer
      ISPRS Geospatial Week 2019
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18K03896
  • [Presentation] SfM-MVSによる効率的で高品質なas-isモデル生成のための最適撮影計画 - 貪欲法による低品質領域の推定手法の開発 -2019

    • Author(s)
      森谷亮太,金井理,伊達宏昭,新名恭仁,本間亮平
    • Organizer
      日本写真測量学会北海道支部第37回学術講演会
    • Data Source
      KAKENHI-PROJECT-18K03896
  • [Presentation] Structure from Motionによる効率的で高品質なas-isモデル生成のための最適撮影計画(第2報) ―近似物体表面モデルの生成と品質予測指標の推定―2018

    • Author(s)
      森谷亮太,金井理,伊達宏昭
    • Organizer
      2018年度精密工学会北海道支部学術講演会
    • Data Source
      KAKENHI-PROJECT-18K03896
  • [Presentation] 鋳造品の迅速リバースエンジニアリングに関する研究-計測シミュレーションに基づく鋳造品の最適計測姿勢推定手法の有用性評価-2018

    • Author(s)
      浦田昇尚,伊達宏昭,金井理,後藤孝行,安田星季
    • Organizer
      2018年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18K03896
  • [Presentation] OPTIMUM LASER SCAN PLANNING FOR AS-BUILT 3D MODELING OF HVAC SYSTEM WITH DIFFICULT-TO-MEASURE REGIONS2017

    • Author(s)
      Eisuke Wakisaka, Satoshi Kanai, Hiroaki Date
    • Organizer
      the 3rd International Conference on Civil and Building Engineering Informatics
    • Place of Presentation
      Taipei (Taiwan)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 点群投影画像に基づく大規模環境レーザ計測点群の自動位置合わせ - グラフ表現を用いた複数点群のロバスト・高精度位置合わせ -2017

    • Author(s)
      角 太樹,伊達 宏昭,金井 理
    • Organizer
      2017年度精密工学会春季大会学術講演会
    • Place of Presentation
      慶應義塾大学矢上キャンパス(神奈川県・横浜市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 難計測部をもつ空調設備as-built3次元モデル構築のための最適スキャナ配置計画(第2報)- 計測重要度を考慮したスキャナ配置位置の推定と効果検証 -2017

    • Author(s)
      脇坂 英佑,金井 理,伊達 宏昭
    • Organizer
      2017年度精密工学会春季大会学術講演会
    • Place of Presentation
      慶應義塾大学矢上キャンパス(神奈川県・横浜市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 円筒オブジェクト一致制約を利用したプラント配管系統レーザスキャン点群データの高精度レジストレーション2017

    • Author(s)
      森谷 亮太,金井 理,伊達 宏昭, 渡辺 正浩,中野 隆宏,山内 雄太
    • Organizer
      2017年度精密工学会春季大会学術講演会
    • Place of Presentation
      慶應義塾大学矢上キャンパス(神奈川県・横浜市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] レーザ計測点群に対する局所形状特徴量の抽出とその応用 - 各局所形状特徴量の比較と特徴線生成への応用 -2017

    • Author(s)
      加藤 雅志,伊達 宏昭,金井 理
    • Organizer
      2017年度精密工学会春季大会学術講演会
    • Place of Presentation
      慶應義塾大学矢上キャンパス(神奈川県・横浜市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 配管系統のレーザ計測とモデル化のための最適スキャナ位置推定(第2報)- 認識率検証の高精度化と効率化2016

    • Author(s)
      山西伸哉,金井理,伊達宏昭
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学野田キャンパス
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 航空写真計測メッシュとMMS計測点群を用いた高品質市街地モデル生成 - MMS計測点群による航空写真計測メッシュの改善2016

    • Author(s)
      吉村玲二,伊達宏昭,金井理,本間亮平,織田和夫,池田辰也
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学野田キャンパス
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] Automatic Registration of Laser-Scanned Point Clouds of Bridges using Linear Features2016

    • Author(s)
      Hiroaki Date, Takahito Yokoyama, Satoshi Kanai, Yoshiro Hada, Manabu Nakao, and Toshiya Sugawara
    • Organizer
      Asian Conference on Design and Digital Engineering
    • Place of Presentation
      Jeju (Republic of Korea)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 点群投影画像に基づく複数大規模環境レーザ計測点群の自動レジストレーション - 空間分類に基づくレジストレーション妥当性評価を用いた手法性能改善2016

    • Author(s)
      角太樹,伊達宏昭,金井理
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学野田キャンパス
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 難計測部をもつ空調設備as-built3次元モデル構築のための最適スキャナ配置計画(第1報) - 不完全なSfMモデルに基づいた計測対象空間の空間占有状態分類手法 -2016

    • Author(s)
      脇坂 英佑,金井 理,伊達 宏昭
    • Organizer
      2016年度精密工学会秋季大会学術講演会
    • Place of Presentation
      茨城大学水戸キャンパス(茨城県・水戸市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 点群投影画像に基づく大規模環境レーザ計測点群の自動位置合わせ ―高さ情報と遮蔽情報を用いた画像の拡張による効率化と検証―2016

    • Author(s)
      角 太樹,伊達 宏昭,金井 理
    • Organizer
      2016年度精密工学会北海道支部学術講演会
    • Place of Presentation
      旭川市大雪クリスタルホール(北海道・旭川市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 点群投影画像に基づく大規模環境レーザ計測点群の自動位置合わせ - 点群特徴を用いた画像の拡張による効率化 -2016

    • Author(s)
      角 太樹,伊達 宏昭,金井 理
    • Organizer
      2016年度精密工学会秋季大会学術講演会
    • Place of Presentation
      茨城大学水戸キャンパス(茨城県・水戸市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 市街地環境MMS計測点群のマルチスケール特徴抽出に関する研究2016

    • Author(s)
      加藤 雅志,伊達 宏昭,金井 理
    • Organizer
      2016年度精密工学会北海道支部学術講演会
    • Place of Presentation
      旭川市大雪クリスタルホール(北海道・旭川市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 円筒オブジェクト一致制約を利用したプラント配管系統レーザスキャンデータの高精度レジストレーション2016

    • Author(s)
      森谷 亮太,金井 理,伊達 宏昭, 渡辺 正浩,中野 隆宏,山内 雄太
    • Organizer
      2016年度精密工学会北海道支部学術講演会
    • Place of Presentation
      旭川市大雪クリスタルホール(北海道・旭川市)
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] Automatic Registration of MLS Point Clouds and SfM Meshes of Urban Area2015

    • Author(s)
      R. Yoshimura, H. Date, S. Kanai, R. Honma, K. Oda, and T. Ikeda
    • Organizer
      The 9th International Symposium on Mobile Mapping Technology
    • Place of Presentation
      The University of New South Wales
    • Year and Date
      2015-12-09
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] Automatic Robust Registration of MLS Point Clouds of Urban Area2015

    • Author(s)
      H. Date, S. Takai, S. Kanai, R. Honma, K. Oda, and T. Ikeda
    • Organizer
      The 9th International Symposium on Mobile Mapping Technology
    • Place of Presentation
      The University of New South Wales
    • Year and Date
      2015-12-09
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 大規模環境のレーザスキャンに基づいた人間行動シミュレーション技術2015

    • Author(s)
      金井 理
    • Organizer
      3D レーザスキャニング&イメージングシンポジウム2015
    • Place of Presentation
      東京大学(東京都・文京区)
    • Year and Date
      2015-11-20
    • Invited
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Presentation] OPTIMAL SETUP OF A TERRESTRIAL LASER SCANNER FOR CAPTURING PIPING OBJECTS IN PLANTS2015

    • Author(s)
      Satoshi Kanai, Shin-ya Yamanishi and Hiroaki Date
    • Organizer
      2nd International Conference on Civil and Building Engineering Informatics
    • Place of Presentation
      東京コンベンションホール
    • Year and Date
      2015-04-22
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 光産業・社会インフラを対象とした大規模レーザスキャニングとその応用2015

    • Author(s)
      金井 理
    • Organizer
      レーザー学会東京支部セミナー
    • Place of Presentation
      慶応大学理工学部(横浜市・日吉区)
    • Year and Date
      2015-07-24
    • Invited
    • Data Source
      KAKENHI-PROJECT-26560168
  • [Presentation] デプスカメラを用いたTLS点群内未計測領域の点群補完手法の開発2015

    • Author(s)
      角太樹,伊達宏昭,金井理
    • Organizer
      2015年度精密工学会北海道支部学術講演会
    • Place of Presentation
      千歳科学技術大学
    • Year and Date
      2015-08-29
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 道路面と道路周辺物体を用いた市街地SfMメッシュとMMS点群のスケール・位置合せ2015

    • Author(s)
      吉村玲二,伊達宏昭,金井理,本間亮平,織田和夫,池田辰也
    • Organizer
      2015年度精密工学会北海道支部学術講演会
    • Place of Presentation
      千歳科学技術大学
    • Year and Date
      2015-08-29
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 未計測領域補完のためのTLSとデプスカメラ計測点群の自動レジストレーション2015

    • Author(s)
      角太樹,伊達宏昭,金井理
    • Organizer
      2015年度精密工学会秋季大会学術講演会
    • Place of Presentation
      東北大学
    • Year and Date
      2015-09-04
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 市街地MMS 計測点群のロバスト位置合わせのためのラフ位置合わせとずれ算出用点群評価2014

    • Author(s)
      高井俊吾,伊達宏昭,金井 理,本間亮平,織田和夫,池田辰也
    • Organizer
      2014年度精密工学会北海道支部学術講演会
    • Place of Presentation
      札幌市立大学
    • Year and Date
      2014-08-30
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 3次元幾何公差検証のための計測点群への形体フィッティングアルゴリズムライブラリの提案2014

    • Author(s)
      金井 理
    • Organizer
      2014年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京大学本郷キャンパス(東京都文京区)
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Presentation] 段階的ODTスムージングを用いた寸法駆動変形四面体メッシュの品質改善-局所的位相変更による要素ひずみと裏返りの修正-2013

    • Author(s)
      前濱宏樹,伊達宏昭,金井理
    • Organizer
      2013年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京工業大学,東京都
    • Year and Date
      2013-03-13
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Presentation] 点群の構造化と近傍探索2013

    • Author(s)
      金井 理
    • Organizer
      精密工学会「点群処理基礎技術」講習会
    • Place of Presentation
      東京大学山上会館(東京都文京区)
    • Invited
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Presentation] X線CT計測メッシュからのボイドを含む製品の四面体メッシュ生成-適応的メッシュ細分化によるボイドの位相・幾何の高精度再現-2013

    • Author(s)
      東翔也,伊達宏昭,金井理
    • Organizer
      2013年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京工業大学,東京都
    • Year and Date
      2013-03-13
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Presentation] Making a Digital Human Walk Directly in the 3D Laser-scanned Point Clouds of Indoor Environments2013

    • Author(s)
      Satoshi Kanai
    • Organizer
      International Conference on Civil and Building Engineering Informatics 2013
    • Place of Presentation
      東京国際交流会館(東京都江東区)
    • Data Source
      KAKENHI-PROJECT-24360057
  • [Presentation] Feature-based 3D Process Planning for MEMS Fabrication2012

    • Author(s)
      Satoshi Kanai
    • Organizer
      2012 Asian Conference on Design and Digital Engineering
    • Place of Presentation
      ヒルトンニセコビレッジホテル(北海道)
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Presentation] An efficient skin deformation based on modified Boussinesq approximation for Digital Hand2012

    • Author(s)
      Yulai Xie, Hiroaki Date, Satoshi Kanai
    • Organizer
      2012年度精密工学会春季大会学術講演会講演会
    • URL

      https://www.jstage.jst.go.jp/browse/pscjspe/-char/ja/

    • Place of Presentation
      首都大学東京,東京都
    • Year and Date
      2012-03-14
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Presentation] 段階的 ODTスムージングによる寸法駆動変形メッシ ュの品質改善2012

    • Author(s)
      前濱宏樹,伊達宏昭,金井理
    • Organizer
      2012年度精密工学会秋季大会学術講演会
    • URL

      https://www.jstage.jst.go.jp/article/pscjspe/

    • Place of Presentation
      九州工業大学,福岡県
    • Year and Date
      2012-09-15
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Presentation] ボイドを含む製品の X 線 CT 計測表面メッシュからの解析四面体メッシュ生成-メッシュ適合を用いた高精度・高品質メッシュ生成-2012

    • Author(s)
      東翔也,伊達宏昭,金井理,田中大之
    • Organizer
      2012年度精密工学会 春季大会学術講演会
    • URL

      https://www.jstage.jst.go.jp/article/pscjspe/2012S/0/2012S_563/_article/-char/ja/

    • Place of Presentation
      首都大学東京, 東京都
    • Year and Date
      2012-03-15
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Presentation] Feature-based 3D Process Planning for MEMS Fabrication2012

    • Author(s)
      Satoshi Kanai, Takayuki Shibata and Takahiro Kawashima
    • Organizer
      2012 Asian Conference on Design and Digital Engineering
    • URL

      http://www.sdm.ssi.ist.hokudai.ac.jp/publications.html

    • Place of Presentation
      Hilton Niseko Village Hotel, Hokkaido, Japan
    • Year and Date
      2012-12-07
    • Data Source
      KAKENHI-PROJECT-23656112
  • [Presentation] 3D human hand modeling and its application to virtual ergonomic assessments2011

    • Author(s)
      Satoshi Kanai
    • Organizer
      CAD 2011 Conference and Exhibition
    • Place of Presentation
      The Grand Hotel, (Taipei, Taiwan)(招待講演)
    • Year and Date
      2011-06-30
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Presentation] 3D Digital Prototyping of Information Appliances based on Mixed Reality with Markerless Tracking2011

    • Author(s)
      Satoshi Kanai
    • Organizer
      Asian Conference on Design and Digital Eneineering
    • Place of Presentation
      Hua Ting Hotel Towers, (Shanghai,中国)
    • Year and Date
      2011-08-27
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Presentation] 3D human hand modeling and its application to virtual ergonomic assessments2011

    • Author(s)
      Satoshi Kanai
    • Organizer
      CAD 2011 Conference and Exhibition
    • Place of Presentation
      Taipei, ROC
    • Year and Date
      2011-06-30
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Presentation] MRI-based 3D precise human hand modeling and its application to the ergonomic assessments2010

    • Author(s)
      Satoshi KANAI
    • Organizer
      2010 SNU-HU GCOE Collaborative Workshop on Advanced 3D Modeling and Sensing for Complex Objects and Environments
    • Place of Presentation
      北海道大学(札幌)(招待)
    • Year and Date
      2010-11-26
    • Data Source
      KAKENHI-PROJECT-21360067
  • [Presentation] 三次元規則パターン認識手法の研究(第1報)-平行移動・回転組み合わせ型パターンの認識-2009

    • Author(s)
      近藤大輔, 溝口知広, 金井理
    • Organizer
      2009 年度精密工学会春季大会学術講演会
    • URL

      http://jglobal.jst.go.jp/detail.php?JGLOBAL_ID=200902252148683604

    • Place of Presentation
      中央大学, 東京都
    • Year and Date
      2009-03-11
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] 規則性認識に基づく組立品計測メッシュの部品別分解と運動シミュレーションへの応用2009

    • Author(s)
      溝口知広, 金井理
    • Organizer
      2009年度精密工学会春季大会学術講演会
    • URL

      http://jglobal.jst.go.jp/detail.php?JGLOBAL_ID=200902291925643617

    • Place of Presentation
      中央大学, 東京都
    • Year and Date
      2009-03-11
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] リバースエンジニアリングのためのユークリッド対称性認識手法(第2報)-ICP とregion growingの組み合わせによる対称性認識手法の開発-2008

    • Author(s)
      溝口知広, 金井理
    • Organizer
      2008年度精密工学会春季大会学術講演会
    • URL

      http://www.jstage.jst.go.jp/article/pscjspe/2008S/0/2008S_9/_article/-char/ja/

    • Place of Presentation
      明治大学, 川崎市
    • Year and Date
      2008-03-17
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] 高密度X線CT計測モデルからのユークリッド対称性認識2008

    • Author(s)
      溝口知広, 金井 理
    • Organizer
      2008年度機械学会生産システム部門研究発表講演会
    • Place of Presentation
      産業技術大学院大学, 東京都
    • Year and Date
      2008-07-04
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] スウィープ型フィーチャの認識に基づく測定メッシュからのCAD モデル自動生成(第2報)2008

    • Author(s)
      山下憲史, 溝口知広, 金井理
    • Organizer
      2008年度精密工学会春季大会学術講演会
    • URL

      http://www.jstage.jst.go.jp/article/pscjspe/2008S/0/2008S_17/_article/-char/ja/

    • Place of Presentation
      明治大学, 川崎市
    • Year and Date
      2008-03-17
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] 計測データからの三次元規則パターン認識手法の研究2008

    • Author(s)
      近藤大輔, 溝口知広, 金井理
    • Organizer
      2008年度精密工学会北海道支部学術講演会
    • Place of Presentation
      旭川高専, 旭川市
    • Year and Date
      2008-09-06
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] 計測データからの3次元規則形状認識手法の研究2008

    • Author(s)
      近藤大輔, 溝口知広, 金井理
    • Organizer
      2008年度精密工学会春季大会卒業研究発表会
    • Place of Presentation
      川崎市
    • Year and Date
      2008-03-17
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] Applying user interface-operable 3D digital prototypes to hum an-centered design of information appliances2008

    • Author(s)
      Satoshi Kanai
    • Organizer
      2008 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
    • Place of Presentation
      N.Y. Marriot at Brooklyn Bridge, New York City, U.S.A.
    • Year and Date
      2008-08-06
    • Data Source
      KAKENHI-PROJECT-19650043
  • [Presentation] リバースエンジニアリングのためのユークリッド対称性認識に関する研究(第4報)2008

    • Author(s)
      溝口知広, 金井理
    • Organizer
      2008年度精密工学会北海道支部学術講演会
    • Place of Presentation
      旭川高専, 旭川市
    • Year and Date
      2008-09-06
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] 3D digital prototyping and usability enhancement of information appliances based on UsiXML2008

    • Author(s)
      Satoshi Kanai
    • Organizer
      IDMME-Virtual Concept 2008
    • Place of Presentation
      Friendship Hotel, Beijing, China
    • Year and Date
      2008-10-10
    • Data Source
      KAKENHI-PROJECT-19650043
  • [Presentation] リバースエンジニアリングのためのユークリッド対称性認識に関する研究(第3報)-AND/ORグラフを利用した対称性の階層的表現生成~2008

    • Author(s)
      溝口知広, 金井理
    • Organizer
      2008年度精密工学会秋季大会学術講演会
    • Place of Presentation
      東北大学, 仙台市
    • Year and Date
      2008-09-17
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] リバースエンジニアリングのためのユークリッド対称性認識に関する研究2007

    • Author(s)
      溝口知広, 金井理
    • Organizer
      2007年度精密工学会秋季大会学術講演
    • URL

      http://www.jstage.jst.go.jp/article/pscjspe/2007A/0/2007A_325/_article/-char/ja/

    • Place of Presentation
      旭川ときわ市民ホール, 旭川市
    • Year and Date
      2007-09-12
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] リバースエンジニアリングのためのユークリッド対称性認識手法2007

    • Author(s)
      溝口知広, 金井 理
    • Organizer
      2007年度精密工学会北海道支部学術講演会
    • Place of Presentation
      苫小牧工業高専, 苫小牧市
    • Year and Date
      2007-08-25
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] スウィープ型フィーチャの認識に基づく測定メッシュからのCADモデル自動生成2007

    • Author(s)
      山下憲史, 溝口知広, 金井理
    • Organizer
      2007年度精密工学会北海道支部学術講演会
    • Place of Presentation
      苫小牧工業高専, 苫小牧市
    • Year and Date
      2007-08-25
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] スウィープ型フィーチャの認識に基づく測定メッシュからのCAD モデル自動生成2007

    • Author(s)
      山下憲史, 溝口知広, 金井理
    • Organizer
      2007年度精密工学会秋季大会学術講演会
    • URL

      http://www.jstage.jst.go.jp/article/pscjspe/2007A/0/2007A_319/_article/-char/ja/

    • Place of Presentation
      旭川ときわ市民ホール, 旭川市
    • Year and Date
      2007-09-12
    • Data Source
      KAKENHI-PROJECT-19360067
  • [Presentation] 航空写真計測メッシュとMMS計測点群を用いた高品質市街地モデル生成 - 計測データ間の位置合わせ -

    • Author(s)
      吉村玲二,伊達宏昭,金井 理,本間亮平,織田和夫,池田辰也
    • Organizer
      2015年度精密工学会春季大会学術講演会
    • Place of Presentation
      東洋大学 白山キャンパス
    • Year and Date
      2015-03-17 – 2015-03-19
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] Registration of Point Clouds of Large-Scale Environments using Point Projection Images

    • Author(s)
      Hiroaki DATE, Yusuke MATSUYAMA, Satoshi KANAI
    • Organizer
      The 15th International Conference on Precision Engineering
    • Place of Presentation
      金沢市
    • Year and Date
      2014-07-23 – 2014-07-25
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 走行軌跡を用いた市街地MMS計測点群の高精度レジストレーション - ラフレジストレーションとずれ算出用部分点群の適応的抽出 -

    • Author(s)
      高井俊吾,伊達宏昭,金井 理,本間亮平,織田和夫,池田辰也
    • Organizer
      2014年度精密工学会秋季大会学術講演会
    • Place of Presentation
      鳥取大学
    • Year and Date
      2014-09-16 – 2014-09-18
    • Data Source
      KAKENHI-PROJECT-26420073
  • [Presentation] 走行軌跡を用いた市街地MMS計測点群の高精度レジストレーション - GCPを参照した点群位置修正と大規模点群データへの適用 -

    • Author(s)
      高井俊吾,伊達宏昭,金井 理,本間亮平,織田和夫,池田辰也
    • Organizer
      2015年度精密工学会春季大会学術講演会
    • Place of Presentation
      東洋大学 白山キャンパス
    • Year and Date
      2015-03-17 – 2015-03-19
    • Data Source
      KAKENHI-PROJECT-26420073
  • 1.  KISHINAMI Takeshi (30001796)
    # of Collaborated Projects: 12 results
    # of Collaborated Products: 27 results
  • 2.  DATE Hiroaki (20374605)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 68 results
  • 3.  SAITO Katsumasa (40001169)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  TANAKA Fumiki (30207138)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 5.  TAKASHASHI Hidetomo (10216749)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 6.  MOCHIMARU Masaaki (90358169)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 2 results
  • 7.  SHIROMA Yoshiyuki (90113571)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  MIYOSHI Takashi (00002048)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  TOMURA Toyoaki (50300512)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 3 results
  • 10.  SASAKI Tetsuo
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 11.  SHIBATA Takayuki (10235575)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 12.  KAWASHIMA Takahiro (50378270)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 13.  MIZOGUCHI Tomohiro (30547831)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 14.  KAWAMURA AKIRA (30149893)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  MORIWAKI T (00031104)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  SUZUKI H (40187761)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  ITO Y (60016441)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  FURUKAWA F (10087190)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  NARAHARA Hiroyuki (80208082)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  HIROSE Michitaka (40156716)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  YOKOI Shigeki (20115744)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 22.  HARASHIMA Hiroshi (60011201)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 23.  KIRIYAMA Takashi (10234402)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  IKEI Yasushi (00202870)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 25.  YAMADA Makoto (20210479)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 26.  AKAMA Kiyoshi (50126265)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 27.  MISTUI Satoshi (00219669)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 28.  KONDO Tsukasa (40292049)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 29.  YOKOUCHI H (00001264)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 30.  亀田 貴雄 (00233974)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 31.  鈴木 聡一郎 (30250541)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 32.  亀山 修一 (30295894)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 33.  萩原 亨 (60172839)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 34.  山崎 元也 (70459709)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 35.  富山 和也 (70589580)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 36.  久保田 晃弘 (70192565)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 37.  コリー 紀代 (80431310)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 38.  近野 敦 (90250688)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 39.  二宮 伸治 (60237774)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 40.  中村 美鈴 (10320772)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 41.  浅賀 忠義 (60241387)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 42.  井上 創造 (90346825)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 43.  小水内 俊介 (40708004)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 44.  萬井 太規 (10765514)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 45.  村田 恵理 (70738476)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 46.  YAMAMOTO Susumu
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 47.  NAKAMURA Kohtaro
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 48.  HAYAKAWA T
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 49.  Rossi Riccardo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 50.  Kanitpong Kunnawee
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 51.  伯田 賢司
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 52.  HAKUTA K
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi