Ushijima Kuniharu 牛島邦晴

… Alternative Names

USHIJIMA Kuniharu 牛島邦晴

Less

Researcher Number	00349838
Other IDs
Affiliation (Current)	2025: 東京理科大学, 工学部機械工学科, 教授
Affiliation (based on the past Project Information) *help	2023 – 2024: 東京理科大学, 工学部機械工学科, 教授 2016 – 2018: 東京理科大学, 工学部機械工学科, 准教授 2015: 東京理科大学, 工学部, 准教授
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials Except Principal Investigator Sections That Are Subject to Joint Review: Basic Section18030:Design engineering-related , Basic Section18040:Machine elements and tribology-related / Basic Section 18040:Machine elements and tribology-related / Basic Section 18030:Design engineering-related / Design engineering/Machine functional elements/Tribology
Keywords	Principal Investigator 座屈 / 強度 / 剛性 / FEM / 造形品質 / 曲げ剛性 / additive manufacturing / 熱伝導特性 / 衝撃圧潰特性 / ラティス構造 … More / 最適化設計 / 吸音特性 / 衝撃吸収特性 / 振動特性 / 曲げ崩壊強度 / 有限要素法 / 積層造形 / ポーラス構造 … More Except Principal Investigator 積層造形 / マルチフィデリティ設計 / 熱交換器 / トポロジー最適化 / 3次元プリンター / 表面・界面物性 / 摩擦シミュレーション / Additive manufacturing / Aditive Manufacturing / Aditive manufacturing / 能動制御 / 3次元微細構造 / 表面テクスチャ / アーキテクチャ / 3次元プリンタ / 自己応答 / 摩擦 / 機能性表面 / トライボロジー / 付加製造技術 / バイオミメティックス Less

Multifidelity topology optimization method for heat transfer equipment fabricated via additive manufacturing
- Principal Investigator
  
  矢地謙太郎
- Project Period (FY)
  2023 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18030:Design engineering-related
  Basic Section 18040:Machine elements and tribology-related
  Sections That Are Subject to Joint Review: Basic Section18030:Design engineering-related , Basic Section18040:Machine elements and tribology-related
- Research Institution
  Osaka University
Biomimetic Surface Architecture for tribology
- Principal Investigator
  
  SASAKI Shinya
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Tokyo University of Science
Evaluation of performance of micro-lattice panel and its optimization designPrincipal Investigator
- Principal Investigator
  
  USHIJIMA Kuniharu
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science

All 2019 2018 2017 2016 2015

All Journal Article Presentation

[Journal Article] The effect of micro-architecture on the failure response of multi-layered lattice sandwich panels under three-point loading2019
- Author(s)
  Omachi Ayumi、Ushijima Kuniharu、Nagakura Yuta、Cantwell Wesley J
- Journal Title
  
  Journal of Sandwich Structures & Materials
  
  Volume: 12 Issue: 2 Pages: 1984216-1984216
- DOI
  10.1177/1099636219842163
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H02310
[Journal Article] Study on Optimal Design for Sandwich Beams Based on the Ground Structure Method2019
- Author(s)
  小池雄介、牛島邦晴、加藤準治
- Journal Title
  
  Transactions of the Japan Society for Computational Engineering and Science
  
  Volume: 2019 Issue: 0 Pages: 20190006-20190006
- DOI
  10.11421/jsces.2019.20190006
- NAID
  130007636373
- ISSN
  1347-8826
- Year and Date
  2019-04-24
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H02310, KAKENHI-PROJECT-19H00781
[Journal Article] Prediction of failure modes and peak loads in lattice sandwich panels under three-point loading2018
- Author(s)
  Ayumi Omachi, Kuniharu Ushijima, Dai-Heng Chen, Wesley J. Cantwell
- Journal Title
  
  Journal of Sandwich Structures and Materials
  
  Volume: 印刷中
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Journal Article] Evaluation of heat dissipation and structural response of a cellular panel as a heat exchanger2018
- Author(s)
  , Kuniharu Ushijima, Masahiro Motosuke, Wesley J Cantwell
- Journal Title
  
  Journal of Sandwich Structures and Materials
  
  Volume: - Issue: 7 Pages: 2289-2312
- DOI
  10.1177/1099636217749274
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Journal Article] ラティス構造を利用した材料の機能化2016
- Author(s)
  牛島邦晴
- Journal Title
  
  機能材料
  
  Volume: 36-12 Pages: 35-39
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] オープンセル構造体の伝熱特性および圧力損失に関する研究2018
- Author(s)
  寶澤駿，牛島邦晴，元祐昌廣
- Organizer
  日本機械学会第31回計算力学講演会
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] 積層造形下での制約を考慮したラティス構造の最適化設計2018
- Author(s)
  小池雄介，牛島邦晴，加藤準治
- Organizer
  日本機械学会第31回計算力学講演会
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] SIMPLE ESTIMATION TECHNIQUE OF MECHANICAL PROPERTIES OF INHOMOGENEOUS POROUS STRUCTURES2018
- Author(s)
  Kuniharu Ushijima, Dai-Heng Chen, Wesley J. Cantwell
- Organizer
  ECCM -ECFD 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] SYSWELDを用いたマイクロラティス構造の積層造形シミュレーション2018
- Author(s)
  牛島邦晴，大島悠暉，両角克之
- Organizer
  PUCA 2018-ESI Users' Forum Japan
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] 選択的レーザ溶融法で造形したマイクロラティス構造の衝撃圧潰特性評価2018
- Author(s)
  牛島邦晴
- Organizer
  公益社団法人日本材料学会　衝撃部門委員会　講演会
- Invited
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] 選択的レーザ溶融法で造形したマイクロラティス構造の特性評価2018
- Author(s)
  牛島邦晴，長倉祐太，佐々木信也，向後保雄, 井上遼
- Organizer
  第26回機械材料・材料加工技術講演会(M&P2018)
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] 金属3Dプリンタで造形した軽量lattice構造の機械的特性に関する研究2018
- Author(s)
  長倉祐太，牛島邦晴, 佐々木信也, 向後保雄, 井上遼，山田浩之
- Organizer
  日本自動車技術会　2018秋季大会
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] Failure behavior of micro-lattice sandwich panel subjected to three-point bending2018
- Author(s)
  牛島邦晴
- Organizer
  International Conference on Structural Fatigue and Fracture Theory and Experimental Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] LS-DYNAを用いた軽量ラティス構造の機械的特性評価2018
- Author(s)
  牛島邦晴
- Organizer
  LS-DYNA & JSTAMP フォーラム2018
- Invited
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] Ground Structure Based Robust Design: The Effect of Geometrical Imperfections and Constraints on the Optimal Shape of Metallic Lattice Structures Manufactured via Selective Laser Melting2018
- Author(s)
  Yusuke Koike, Kuniharu Ushijima, Junji Kato
- Organizer
  13th World Congress on Computational Mechanics
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] 3領域からなる複合構造体の弾性係数評価2017
- Author(s)
  鈴田照平，牛島邦晴
- Organizer
  日本機械学会 M&M2017材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] Evaluation of heat dissipation and structural response of cellular panel as heat exchanger2017
- Author(s)
  Shohei Higashiyama, Kuniharu Ushijima, Masahiro Motosuke, Wesley J Cantwell
- Organizer
  3rd International Conference on Mechanics of Composites
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] 選択的レーザ溶融法で作製したマイクロラティス構造の機械的特性2017
- Author(s)
  長倉祐太，牛島邦晴
- Organizer
  日本機械学会関東支部第23期総会・講演会
- Place of Presentation
  東京理科大学葛飾キャンパス
- Year and Date
  2017-03-16
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] latticeをコアとするサンドイッチ梁の振動特性に関する研究2017
- Author(s)
  毛利宣裕，牛島邦晴
- Organizer
  日本設計工学会2017年度春季大会研究発表講演会
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] 選択的レーザ溶融法で造形したマイクロラティス構造の衝撃圧潰特性評価2017
- Author(s)
  長倉祐太，牛島邦晴，山田浩之，立山耕平
- Organizer
  日本材料学会主催　第12回材料の衝撃問題シンポジウム
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] latticeをコアとするサンドイッチ梁の振動特性に関する研究2017
- Author(s)
  毛利宣裕，牛島邦晴
- Organizer
  MSCSoftware 2017 Users Conference
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] 軽量構造の創成と数値シミュレーション解析の役割2017
- Author(s)
  牛島邦晴
- Organizer
  MSCSoftware 2017 Users Conference
- Invited
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] ラティス構造の衝撃吸収特性評価2017
- Author(s)
  半沢光利，牛島邦晴
- Organizer
  日本機械学会 M&M2017材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] Prediction of failure modes and peak loads in micro-lattice sandwich panels under three-point loading2017
- Author(s)
  Ayumi Omachi, Kuniharu Ushijima, Dai-Heng Chen, Wesley J Cantwell
- Organizer
  3rd International Conference on Mechanics of Composites
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] 選択的レーザ溶融法で作製したマイクロラティス構造の機械的特性とその評価2017
- Author(s)
  牛島邦晴
- Organizer
  2017年度日本機械学会年次大会
- Invited
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] 3点曲げ荷重を受けるマイクロラティスサンドイッチパネルの強度評価2017
- Author(s)
  大町あゆみ，牛島邦晴
- Organizer
  日本機械学会関東支部第23期総会・講演会
- Place of Presentation
  東京理科大学葛飾キャンパス
- Year and Date
  2017-03-16
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] Effect of Missing Cells on the Initial Stiffness and Plastic Yielding Surface of Three-Dimensional Micro-Lattice Structures2016
- Author(s)
  Kuniharu Ushijima
- Organizer
  Global Congress and Expo on Materials Science and Nanoscience
- Place of Presentation
  ドバイ（ＵＡＥ）
- Year and Date
  2016-10-24
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] Estimation of Effective Elastic Modulus of Structures Composed of Three Parts2016
- Author(s)
  牛島邦晴
- Organizer
  Global Congress and Expo on Materials Science and Nanoscience
- Place of Presentation
  Dubai, UAE
- Year and Date
  2016-10-24
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02310
[Presentation] Estimation of Mechanical Properties of Micro-Lattice Panel with Irregular Cells2015
- Author(s)
  牛島邦晴
- Organizer
  2nd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines
- Place of Presentation
  ウィーン工科大学
- Year and Date
  2015-09-20
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690
[Presentation] Effect of Missing Cells on the Initial Stiffness and Plastic Yielding Surface of Three-Dimensional Micro-Lattice Structures2015
- Author(s)
  牛島邦晴
- Organizer
  12th International Conference on the Mechanical Behavior of Materials
- Place of Presentation
  カールスルーエ
- Year and Date
  2015-05-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05690

1. MOTOSUKE Masahiro (80434033)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
2. YAMAGUCHI Takao (90323328)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. ASAKURA Takumi (60778207)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. SASAKI Shinya (40357124)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
5. 田所千治 (00736770)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 宮武正明 (70434032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 酒井秀樹 (80277285)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 野口昭治 (80349836)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 坪井涼 (90548158)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 矢地謙太郎 (90779373)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. CHEN Dai-Heng

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
12. Sakai Kenichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. Kawada Syouhei

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. Cantwell Wesley

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results

Ushijima Kuniharu 牛島 邦晴

USHIJIMA Kuniharu 牛島 邦晴

Research Projects

Research Products

Co-Researchers

Multifidelity topology optimization method for heat transfer equipment fabricated via additive manufacturing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Biomimetic Surface Architecture for tribology

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation of performance of micro-lattice panel and its optimization designPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] The effect of micro-architecture on the failure response of multi-layered lattice sandwich panels under three-point loading2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Study on Optimal Design for Sandwich Beams Based on the Ground Structure Method2019

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Prediction of failure modes and peak loads in lattice sandwich panels under three-point loading2018

Author(s)

Journal Title

Data Source

[Journal Article] Evaluation of heat dissipation and structural response of a cellular panel as a heat exchanger2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] ラティス構造を利用した材料の機能化2016

Author(s)

Journal Title

Data Source

[Presentation] オープンセル構造体の伝熱特性および圧力損失に関する研究2018

Author(s)

Organizer

Data Source

[Presentation] 積層造形下での制約を考慮したラティス構造の最適化設計2018

Author(s)

Organizer

Data Source

[Presentation] SIMPLE ESTIMATION TECHNIQUE OF MECHANICAL PROPERTIES OF INHOMOGENEOUS POROUS STRUCTURES2018

Author(s)

Organizer

Data Source

[Presentation] SYSWELDを用いたマイクロラティス構造の積層造形シミュレーション2018

Author(s)

Organizer

Data Source

[Presentation] 選択的レーザ溶融法で造形したマイクロラティス構造の衝撃圧潰特性評価2018

Author(s)

Organizer

Data Source

[Presentation] 選択的レーザ溶融法で造形した マイクロラティス構造の特性評価2018

Author(s)

Organizer

Data Source

[Presentation] 金属3Dプリンタで造形した軽量lattice構造の機械的特性に関する研究2018

Author(s)

Organizer

Data Source

[Presentation] Failure behavior of micro-lattice sandwich panel subjected to three-point bending2018

Author(s)

Ushijima Kuniharu 牛島邦晴

USHIJIMA Kuniharu 牛島邦晴

[Presentation] 選択的レーザ溶融法で造形したマイクロラティス構造の特性評価2018