FURUKAWA Yuji 古川勇二

… Alternative Names

Furukawa Yuji 古川勇二

Less

Researcher Number	10087190
External Links
Affiliation (Current)	2025: 独立行政法人高齢・障害・求職者雇用支援機構職業能力開発総合大学校(能力開発院、基盤整備センター), 能力開発院, 名誉教授
Affiliation (based on the past Project Information) *help	2015: 独立行政法人高齢・障害・求職者雇用支援機構職業能力開発総合大学校(能力開発院、基, 能力開発院, 教授 2013 – 2015: 独立行政法人高齢・障害・求職者雇用支援機構職業能力開発総合大学校(能力開発院、基, その他部局等, 教授 2007 – 2008: Tokyo University of Agriculture and Technology, Master of Technology Management, Professor 2006: Tokyo University of Agriculture and Technology, Graduate School of Technology Management, Professor, 大学院技術経営研究科, 教授 2005: 東京農工大学, 大学院・技術経営研究科, 教授 … More 2004: 国立大学法人東京農工大学, 大学院・共生科学技術研究部, 教授 2003: TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY, FACULTY OF TECHNOLOGY, PROFESSER, 工学部, 教授 2002: 東京都立大学, 工学研究科, 教授 1997 – 2001: 東京都立大学, 大学院・工学研究科, 教授 1997 – 1999: 東京都立大学, 工学研究科, 教授 1986 – 1998: Professor, Faculty of Engineering, University of Tokyo Prefecture, 工学部, 教授 1986: 都立大, 工学部, 教授 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 / 機械工作 / Science and Engineering Except Principal Investigator 機械工作 / 機械工作・生産工学 / Intelligent mechanics/Mechanical systems / Production engineering/Processing studies
Keywords	Principal Investigator 分子線エピタキシ / 超精密加工 / MEMS / MBE / 仕上がり形状 / 異方性エッチング / 筋肉細胞 / SiC / シリコン / computer simulation … More / finished accuracy / micro maching / etching / コンピュータシミュレーション / 異方性 / コンピュ-タシミュレ-ション / 仕上り精度 / 微細加工 / エッチング / sintered nylon / piezo-electric actuater / linear motor / resin concrete / ceramics / new material / 送り機構 / セラミクス / ナイロン焼接体 / 超精密 / 電歪素子 / リニアモータ / レジンコンクリート / セラミックス / 新素材 / YAG laser / indentation / epitaxy / nano structure / surface integrity / thin layer / Silicon Carbonate (SiC) / Sic / サーフェスインテグリティー / YAGレーザ / インデンテーション / エピタキシ / ナノ構造 / サーフェスインテグリティ / 薄膜層 / Single crystal silicon / Ablation / In-situ measurement / Eximer Laser / フォトン / エネルギ分布 / 単結晶シリコン / アブレーション / インプロセス計測 / エキシマレーザ / atomically smooth surface / molecular beam epitaxy / silicon carbide / 平滑面 / 単結晶炭化シリコン / 超平滑面 / 炭化シリコン / Silicon / ultra precision / Micro-machining / Electron Beam Drawing / 電子線描画 / マイクロマシ-ニング / 電子線描画加工 / Ultra Precision Machining / Molecular Beam Epitaxy / Linear Motion / Bearing / Motion Accuracy / Tribology / Friction / Vacuum / トライボロジ / 直線運動 / ベアリング / 運動精度 / トロイボロジ / 摩擦 / 真空 / モデル化 / 認知科学 / 教育工学 / 機械工作・生産工学 / 感性情報学 / 視線解析 / 動作分析 / 神経系 / 暗黙知 / フライス盤 / 技能習得 / 技能伝承 / 身体性認知科学 / 細胞シート / 細胞剥離試験 / 細胞接着力 / 生体機能利用 / 生体材料 / マイクロ・ナノデバイス / マイクロ加工 / ナノ / 駆動原理 / 振動計測 / マイクロモータ / 超音波 / 電気刺激 / 昆虫細胞 / バイオアクチュエータ / カンチレバー / 溝加工 / ナノプロセス / 偏光 / AFM / レーザ … More Except Principal Investigator FMS / CIM / 生産システム / フレキシブル生産システム / DNA / シリコン / 異方性エッチング / 真実接触面積 / Economical Evaluation / Software / Flexibility / Quantitative Evaluation / Evaluation Method / Flexibility of System / Manufacturing System / 評価方法 / システムの柔軟性 / ソフトウェア / フレキシビリティ / 経済性評価 / 定量的評価方法 / システムのフレキシビリティ / フレキシビル生産システム / Knowledge Representation / Knowledge Acqisition / Manufacturing Systems / 知識ベース生産システム / 組立工程 / 金型加工 / ノウハウ / 経験則 / 知識ベース / エキスパートシステム / 知識表現 / 知識獲得 / Productivity / FMS simulation / FMS modeling / FMS model / Simulation / Flexible manufacturing system / 経済性 / 生産性 / FMSシミュレータ / FMSモデリング / FMSモデル / シミュレーション / Bioreactor / Micromachine / Bacteria / Fuel cell / バイオリアクター / マイクロマシン / 細菌 / 燃料電池 / Glass / Brittle materials / Ultrasonic vibration / Micromachining / Textured surface / Multi-axes vibration / Vibration machining / ぜい性材料 / ガラス / 脆性材料 / 超音波 / 微細加工 / テクスチャ / 多軸振動 / 振動加工 / nano-texture / molecular beam epitaxy / mono crystal silicon / 単結晶シリコン / ナノテクスチャ / 分子線エピタキシ / Adhesion force / Contact / Friction / Tribology / Micromechamism / Silicon / 表面粗土 / 表面吸着力 / 接触面積 / 摩擦力 / トライボロジ / マイクロメカニズム / Single crystal / Geometrical accuracy / silicon / Anisotropic etching / Precise machining / 直角度 / エッチング / 結晶面 / 形状精度 / 高精度加工 / anisotropic etching / ruling engine / single crystal silicon / prism / diffraction grating / infrared spectroscopy / grism / ルークングエンジン / 回折格子 / ルーリングエンジン / シリコン単結晶 / プリズム / 回析格子 / 赤外線分光 / グリズム / vacuum environment / tribology / real area of contact / contact surface / contact pressure distribution / vacuum ultra-violet laser / oxygen absorption process / exoelectron / 接触剛性 / 光励起 / 機械的接触現象 / 極限環境 / 真空環境 / トライボロジー / 結合面 / 接触圧力分布 / 真空紫外レーザ光 / 酸素吸着過程 / エキソ電子 / Compensation Control / Thermal Deformation / Estimation of Deformation / Disturbance in Environment / Ultra Precision Feed Mechanism / Ultra Precision Spindle / Ultra Precision Machine Tool / Ultra Precision Machining / 変形制御 / シミュレ-ション / 加工精度 / 微小変形 / 補正制御 / 熱変形 / 変形の予測 / 微小環境変化 / 精密送り機構 / 超精密主軸 / 超精密工作機械 / 超精密加工 / Intelligent CIM / modelling / knowledge-base / 生産モデル / 知的統合生産システム / モデルング / 知的統合生産 / モデリング / 知識ベ-ス / manufacturing process / Geometric model / Recongnition / Factory model / Computer model / Cominucation / Product model / Distributed automated manufacturing / 生産情報のコミュニケ-ション / CAD@CAM / 生産情報のコミニュケ-ション / 生産プロセスの分散管理 / 加工環境の認識 / CAM / CAD / 知的モデル / セル・コントロ-ラ / 生産情報の誘発機構 / 自律分散生産システム / 生産プロセス / 形状認識 / 加工環境認識 / ファクトリモデル / 計算機モデル / コミニュケーション / 製品モデル / 自律分散生産システム Less

Construction of data acquisition and transfer model for milling machine technology.Principal Investigator
- Principal Investigator
  
  Furukawa Yuji
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  独立行政法人高齢・障害・求職者雇用支援機構職業能力開発総合大学校(能力開発院、基盤整備センター)
薄膜コイル型マイクロモータの駆動原理と試作、性能評価Principal Investigator
- Principal Investigator
  
  古川勇二
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Tokyo University of Agriculture and Technology
Study on Understanding of Micro Adhesion Mechanism at InterfacialAdhesion Layer Between Biological Cells and Solid SurfacePrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
骨格筋細胞によるマイクロ駆動源の創成Principal Investigator
- Principal Investigator
  
  古川勇二
- Project Period (FY)
  2006
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Study on Mechanism of a Direct Photosynthetic/Metabolic Bio-Fuel Cell (DPBFC) using Gene manipulated Bacteria and Prototyping of Flexible DPBFC
- Principal Investigator
  
  MORISHIMA Keisuke
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Tokyo University of Agriculture and Technology
偏光レーザ励振マイクロプローブによる分子再配列加工の原理解明Principal Investigator
- Principal Investigator
  
  古川勇二
- Project Period (FY)
  2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Effect of Single Crystal Nano-Structured Thin Layer on Nano-Surface IntegrityPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Production of three-dimensional and free-form texture with synchronous multi-axes vibration tool
- Principal Investigator
  
  MORONUKI Nobuyuki
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Metropolitan University
GENERATING AND ITS EVALUATION OF NANO-TEXTURE ON THE BASIS OF SELF-ORGANIZATION OF ATOMS AND PRE-PATTERNED NUCLEIPrincipal Investigator
- Principal Investigator
  
  KAKUTA Akira, 古川勇二
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METLOPOLITAN UNIVERSITY
GENERATING AND OBSERBATING OF SiC SUPPER LATTICE AND EXTRA SMOOTH SURFACEPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
STABILIZATION ON PROCESS OF EXIMER LASER BY IN SITU MEASUREMENT OF ENERGYPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
Tribological properties of Micro-Sliding Mechanism Made of Silicon
- Principal Investigator
  
  MORONUKI Nobuyuki
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
Study on mechanism of generating an ultra flat surface by MBEPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
Fabrication of high quality grisms for infrared observation
- Principal Investigator
  
  HARADA Tatsuo
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
Large Scale Anisotropic Etching Combined with Mechanical Machining
- Principal Investigator
  
  MORONUKI Nobuyuki
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
Research on Tribology Evaluation of Mechanical Contact Phenomena in Extreme Environment
- Principal Investigator
  
  YOSHIDA Yoshitaro
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Chiba University
分子伝熱解析による分子線エピタキシ(MBE)超精密加工メカニズムの解明Principal Investigator
- Principal Investigator
  
  古川勇二
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Metropolitan University
Estimation of Final Shape and Accuracy of the Electron Beam Drawing ProcessPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
分子線エピタキシ(MBE)における分子伝熱機構の解明Principal Investigator
- Principal Investigator
  
  古川勇二
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Metropolitan University
Study on generating a flat for Molecular Beam EpitaxyPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuuji
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Metropolitan University
A Study on Models and Knowledge-Base for Intelligent Computer-Integrated Manufacturing Systems
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Osaka University
Simulation and Control of Deformations for Next Generation of Ultra Precision Machine Tools
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
On the Design of Precise Linear Motion Bearing Mechanism in VacuumPrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Metropolitan University
Intelligent Model and Communication for Distributed Automated Manufacturing System
- Principal Investigator
  
  KISHINAMI Takeshi
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Hokkaido University
Systematization of Evaluating FMS and Quantitative Evaluation of Its Flexibility
- Principal Investigator
  
  ITO Yoshimi
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Institute of Technology
An Analysis of Anisotropic Etching Process and Prediction of Finished ProfilePrincipal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  TOKYO METROPOLITAN UNIVERSITY
A Study on Knowledge Acquisition and Knowledge Representation in Manufacturing
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Kobe Univ., Faculty of Engg.
Application of New Materials to Designing of "Nano-mechanism"Principal Investigator
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Metropolitan University
Research on Design Concept and Simulation for Flexible Manufacturing System
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Kobe University

All 2016 2015 2014 2009 2008 2007 2006 2005 2004 Other

All Journal Article Presentation Patent

[Journal Article] Long-term and room temperature operable bio-actuator powered by insect dorsal vessel tissue2009
- Author(s)
  Y. Akiyama, K. Iwabuchi, Y. Furukawa, and K. Morishima
- Journal Title
  
  Lab Chip 9
  
  Pages: 140-144
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Long-term and room temperature operable bio-actuator powered by insect dorsal vessel tissue2009
- Author(s)
  Y. Akiyama, K. Iwabuchi, Y. Furukawa, K. Morishima
- Journal Title
  
  Lab Chip 9
  
  Pages: 140144-140144
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Improved Power Capability with Pyrolyzed Carbon Electrodes in Micro Direct Photosynthetic/Metabolic Bio-fuel Cell2008
- Author(s)
  Takeyuki, Moriuchi, Keisuke, Morishima, Yuii, Furukawa
- Journal Title
  
  International Journal Of Precision Engineering And Manufacturing, Korean Society For Precision Engineering Vol. 9, No.2
  
  Pages: 23-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Culture of Insect Cells Contracting Spontaneously toward an Environmentally Robust Hybrid Robotic System2008
- Author(s)
  Y. Akiyama, K. Iwabuchi, Y. Furukawa, and K. Morishima
- Journal Title
  
  Journal of Biotechnology 133
  
  Pages: 261-266
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] 昆虫背脈管を用いた長期間室温で駆動するバイオアクチュエータの創製2008
- Author(s)
  秋山佳丈, 寺田玲子, 岩淵喜久男, 古川勇二, 森島圭祐
- Journal Title
  
  日本ロボット学会誌 Vol.26, No.6
  
  Pages: 667-6731
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Evaluation of Bacteria Compatible Microporous Surfaces for Biofuel Cells2008
- Author(s)
  Takeyuki, Moriuchi, Keisuke, Morishima, Yuji, Furukawa
- Journal Title
  
  CIRP Annals - Manufacturing Technology Volume 57, Issue 1
  
  Pages: 571-574
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Improved Power Capability with Pyrolyzed Carbon Electrodes in Micro Direct Photosynthetic/Metabolic Bio-fuel Cell2008
- Author(s)
  Takeyuki Moriuchi, Keisuke Morishim and Yuji Furukawa
- Journal Title
  
  International Journal Of Precision Engineering And Manufacturing, Korean Society For Precision Engineering Vol.9, No.2
  
  Pages: 23-27
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] 昆虫背脈管を用いた長期間室温で駆動するバイオアクチュエータの創製2008
- Author(s)
  秋山佳丈, 寺田玲子, 岩淵喜久男, 古川勇二, 森島圭祐
- Journal Title
  
  日本ロボット学会誌 Vol. 26 No. 6
  
  Pages: 667673-667673
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Evaluation of Bacteria Compatible Microporous Surfaces for Biofuel Cells2008
- Author(s)
  Takeyuki Moriuchi, Yuji Furukawa 他1名
- Journal Title
  
  The International Academy for Production Engineering 58-1(未定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Evaluation of Bacteria Compatible Microporous Surfaces for Biofuel Cells2008
- Author(s)
  Takeyuki Moriuchi, Keisuke Morishima and Yuji Furukawa
- Journal Title
  
  The International Academy for Production Engineering Accepted
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Evaluation of Bacteria Compatible Microporous Surfaces for Biofuel Cells2008
- Author(s)
  Takeyuki Moriuchi, Keisuke Morishima and Yuji Furukawa
- Journal Title
  
  CIRP Annals-Manufacturing Technology Vol.57, Issue1
  
  Pages: 571-574
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Culture of Insect Cells Contracting Spontaneously toward an Environmentally Robust Hybrid Robotic System2008
- Author(s)
  Y. Akiyama, K. Iwabuchi, Y. Furukawa, K. Morishima
- Journal Title
  
  Journal of Biotechnology 133
  
  Pages: 261266-261266
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Development of a Mechanical Scanning-type IVUS System Using a Miniature Ultrasound Motor2008
- Author(s)
  Masayuki Tanabe, Shangping Xie, Norio Tagawa, Tadashi Moriya, Yuji Furukawa
- Journal Title
  
  Jap. Soc. of Applied Physics 47-5
  
  Pages: 4262-4264
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19016009
[Journal Article] Improving performance of a direct photosynthetic/metabolic bio-fuel cell (DPBFC) using gene manipulated bacteria2007
- Author(s)
  Keisuke Morishima, Yuji Furukawa 他4名
- Journal Title
  
  Journal Of Micromechanics And Microengineering 17-9
  
  Pages: 274-279
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360061
[Journal Article] Improving performance of a direct photosynthetic/metabolic bio-fuel cell (DPBFC) using gene manipulated bacteria2007
- Author(s)
  Keisuke, Morishima, Makoto, Yoshida, Akihiro, Furuya, Takeyuki, Moriuchi, Masahiro, Ota, Yuji, Furukawa
- Journal Title
  
  Journal Of Micromechanics And Microengineering, Institute Of Physics Publishing Volume 17, No.9
  
  Pages: 274-279
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] 「直径0.95mm」世界最小級の超音波モータ血管内医療機器への応用を期待!2007
- Author(s)
  古川勇二, 廣田輝直, 和田哲郎, 牧田賢治, 守屋正, 篠原潤, 鈴木誠, 春日政雄
- Journal Title
  
  機械設計2007 Vol.51 No.12 8 8
  
  Pages: 87-91
- NAID
  40015555152
- Data Source
  KAKENHI-PROJECT-19016009
[Journal Article] Improving the performance of a direct photosynthetic/metabolic bio-fuel cell (DPBFC) using gene manipulated bacteria2007
- Author(s)
  Keisuke Morishima, Makoto Yoshida, Akihiro Furuya, Takeyuki Moriuchi, Masahiro Ota and Yuji Furukawa,
- Journal Title
  
  Journal Of Micromechanics And Microengineering, Institute Of Physics Publishing 17
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Improving the performance of a direct photosynthetic/metabolic bio-fuel cell(DPBFC)using gene manipulated bacteria2007
- Author(s)
  Keisuke Morishima, Makoto Yoshida, Akihiro Furuya, Takeyuki Moriuchi, Masahiro Ota and Yuji Furukawa
- Journal Title
  
  Journal of Micromechanics And Microengineering, Institute of Physics Publishing Vol.17, No.9
  
  Pages: 274-279
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] 355UVレーザによるSiC薄膜層のマイクロチャンネル創成2006
- Author(s)
  中馬健一朗, 角田陽, 笹原弘之, 古川勇二
- Journal Title
  
  2006年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 1221-1222
- NAID
  130005027199
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Genetic Conversion of Bacteria and its Application to Micro Direct Photosynthetic/Metabolic Bio-Fuel Cell(DPMFC)2006
- Author(s)
  Akihiro Furuya, Takeyuki Moriuchi, Makoto Yoshida, Masahiro Ota, Keisuke Morishima, Yuji Furukawa
- Journal Title
  
  Proceedings of the 10^th International Conference on Miniaturized Systems for Chemistry and Life Sciences (μTAS), Tokyo, Japan, November,(2006) Volume 1
  
  Pages: 482-484
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Design principle and prototyping of a direct photosynthetic/metabolic biofuel cell (DPMFC)2006
- Author(s)
  Yuji, Furukawa, Takeyuki, Moriuchi, Keisuke, Morishima
- Journal Title
  
  Journal Of Micromechanics And Microengineering, Institute Of Physics Publishing Vol. 16, No. 9
  
  Pages: 220-225
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Controllable Bio-Microactuator Powered by Muscle Cells.2006
- Author(s)
  Y.Akiyama, Y.Furukawa, K.Morishima
- Journal Title
  
  International Conference of the IEEE Engineering in Medicine and Biology Society
  
  Pages: 6685-6688
- Data Source
  KAKENHI-PROJECT-18656042
[Journal Article] Reconstruction of Biomechanical Component Using Insect Tissue for a Quasi-Living Actuator2006
- Author(s)
  Y.Akiyama, K.Iwabuchi, Y.Furukawa, K.Morishima
- Journal Title
  
  East Asian Biophysics Symposium ＆ Annual Meeting of the Biophysical Society of Japan
- Data Source
  KAKENHI-PROJECT-18656042
[Journal Article] Nanometer Deflection Control of AFM Probe Irradiating Polarized Laser and its Application to Nano-Structuring Process2006
- Author(s)
  Daisuke MEZAKI, Ken-ichiro CHUMA, Akira KAKUTA, Yuji FURUKAWA
- Journal Title
  
  ICPE2006(International Conference on Precision Engineering) Vol.1(未定)
- Data Source
  KAKENHI-PROJECT-17656049
[Journal Article] 355 UVレーザによるSiC薄膜層のマイクロチャンネル創成2006
- Author(s)
  中馬健一朗, 角田陽, 笹原弘之, 古川勇二
- Journal Title
  
  2006年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 1221-1222
- NAID
  130005027199
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] 微小生命機械システムを目指した昆虫細胞再構築法の開発2006
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Journal Title
  
  第24回日本ロポット学会学術講演会
- Data Source
  KAKENHI-PROJECT-18656042
[Journal Article] Improving Performance of Direct Photosynthetic/Metabolic Bio-Fuel Cell(DPBFC) Using Gene Manipulated Bacteria2006
- Author(s)
  Keisuke Morishima, Akihiro Furuya, Takeyuki Moriuchi, Makoto Yoshida, Masahiro Ota, Yuji Furukawa
- Journal Title
  
  Proceedings of the 6^th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Application (PowerMEMS 2006), UC Berkeley, USA, November,(2006)
  
  Pages: 101-104
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] UVレーザによる石英ガラスの加工2006
- Author(s)
  古市卓也, 笹原弘之, 古川勇二
- Journal Title
  
  精密工学会春季大会学術講演会講演論文集 2006-3
  
  Pages: 1223-1224
- NAID
  130005027200
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Generation of micro channels onto SiC thin layer assisted by 355 nm UV laser2006
- Author(s)
  K.Chuma, A.Kakuta, H.Sasahara, Y.Furukawa
- Journal Title
  
  Proc.Jap.Soc.Prec.Eng.2006(Spring)
  
  Pages: 1221-1222
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] UVレーザによる石英ガラスの加工2006
- Author(s)
  古市卓也, 笹原弘之, 古川勇二
- Journal Title
  
  2006年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 1223-1224
- NAID
  130005027200
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Nanometer Deflection Control of AFM Probe by Irradiating Polarized Laser and its Application to Nano-Structuring Process2006
- Author(s)
  D.Mezaki, K.Chuma, A.Kakukta, Y.Furukawa
- Journal Title
  
  Int.Conf.Precision Engineering Vol.11
  
  Pages: 203-207
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] 量産型バイオマイクロアクチュエータを目指した骨格筋細胞収縮の制御法の開発2006
- Author(s)
  秋山佳丈, 古川勇二, 森島圭祐
- Journal Title
  
  第24回日本ロポット学会学術講演会
- Data Source
  KAKENHI-PROJECT-18656042
[Journal Article] Nanometer Deflection Control of AFM Probe by Irradiating Polarized Laser and its Application to Nano-Structuring Process2006
- Author(s)
  D.Mezaki, K.Chuma, A.Kakuta, Y.Furukawa
- Journal Title
  
  Int. Conf. Precision Engineering Vol.11
  
  Pages: 203-207
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Improving Performance of Direct Photosynthetic/Metabolic Micro Bio Fuel Cell(DPBFC) by Gene Manipulation of Bacteria2006
- Author(s)
  Akihiro Furuya, Takeyuki Moriuchi, Makoto Yoshida, Masahiro Ota, Keisuke Morishima, Yuji Furukawa
- Journal Title
  
  Proceedings of the 11^th International Conference on Precision Engineering (ICPE), Tokyo, Japan, August, (2006)
  
  Pages: 197-207
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Principle Factors Affecting on Sub Micro Grooving Mechanism of SiC Thin Layer by 355 nm UV Laser2006
- Author(s)
  Y.Furukawa, H.Sasahara, A.Kakuta, K.Chuma
- Journal Title
  
  Annals of the CIRP 54, No. 1
  
  Pages: 537-576
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Nanometer Deflection Control of AFM Probe by Irradiating Polarized Laser and its Application to Nano-Structuring Process2006
- Author(s)
  D.Mezaki, K.Chuma, A.Kakuta, Y.Furukawa
- Journal Title
  
  Int. Conf. Precision Engineering Vol. 11
  
  Pages: 203-207
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Design prisnciple and prototyping of a direct photosynthetic/metabolic biofuel cell(DPMFC)2006
- Author(s)
  Yuji Furukawa, Takeyuki Moriuchi and Keisuke Morishima
- Journal Title
  
  Journal Of Micromechanics And Microengineering, Institute Of Physics Publishing, Vol.16, No.9
  
  Pages: 220-225
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Design princicple and protoyping of a direct photosynthetic/metabolic biofuel cell(DPMFC)2006
- Author(s)
  Yuji Furukawa, Takeyuki Moriuchi, Keisuke Morishima
- Journal Title
  
  Journal of Micromechanics and Microengineering Volume16 Number9
  
  Pages: 220-225
- Data Source
  KAKENHI-PROJECT-18360122
[Journal Article] Principle Factors Affecting on Sub Micro Grooving Mechanism of SiC Thin Layer by 355 nm UV Laser2006
- Author(s)
  Y.Furukawa, H.Sasahara, A.Kakuta, K.Chuma
- Journal Title
  
  Annals of the CIRP 54, No.1
  
  Pages: 537-576
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Construction of Regenerative Mechanical Systems of Insect Cells for a Quasi-Living Machine.2006
- Author(s)
  Y.Akiyama, K.Iwabuchi, Y.Furukawa, K.Morishima
- Journal Title
  
  International Symposium on Micro-NanoMechatronics and Human Science
  
  Pages: 1-5
- Data Source
  KAKENHI-PROJECT-18656042
[Journal Article] エピタキシャル成長における3次元島形成を利用したナノテクスチャ創成に関する研究2005
- Author(s)
  金子新, 藤山孝太郎, 角田陽, 諸貫信行, 古川勇二
- Journal Title
  
  精密工学会誌 Vol.71,No.6
  
  Pages: 744-749
- NAID
  110001824179
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] A Study of Surface Integrity of SiC/Si Hybrid Nano-Structured Surfaces2005
- Author(s)
  Kenichiro CHUMA, Yuji FURUKAWA, Yujie HAN. Akira KAKUTA
- Journal Title
  
  Int.Conf.on Leading Edge Manufacturing in 21^<st> century vol.1
  
  Pages: 1199-1204
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Nanopillar formation via defect activation and Coulomb explosion initiated by a 355 nm Nd:YAG laser beam2005
- Author(s)
  Yujie Han, Yuji Furukawa
- Journal Title
  
  The Annals for Micro and Nano System 2005-6(未定)
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Nano texturing process assisted by 3 dimensional growth of micro island in Epitaxy growth2005
- Author(s)
  S.Kaneko, K.Fujiyama, A.Kakuta, N.Moronuki, Y.Furukawa
- Journal Title
  
  Trans.Jap.Soc.Prec.Eng. Vol.71, No.6
  
  Pages: 744-749
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] A Study on Surface Integrity of SiC/Si Hybrid Nano-Structured Surfaces2005
- Author(s)
  Kenichiro CHUMA, Yuji FURUKAWA, Yujie HAN, Akira KAKUTA
- Journal Title
  
  Int.Conf.on Leading Edge Manufacturing in 21^<st> century Vol.1
  
  Pages: 1199-1204
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] A Study on Surface Integrity ofSiC/Si Hybrid Nano-Structured Surfaces2005
- Author(s)
  Kenichiro CHUMA, Yuji FURUKAWA, Yujie HAN, Akira KAKUTA
- Journal Title
  
  Int. Conf. on Leading Edge Manufacturing in 21^<St> century Vol. 1
  
  Pages: 1199-1204
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] エピタキシャル成長における3次元島形成を利用したナノテクスチャ創成に関する研究2005
- Author(s)
  金子新, 藤山孝太郎, 角田陽, 諸貫信行, 古川勇二
- Journal Title
  
  精密工学会誌 Vol. 71, No. 6
  
  Pages: 744-749
- NAID
  110001824179
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Nanopillar formation via defect activation and Coulomb explosion initiated by a 355 nm Nd : YAG laser beam2005
- Author(s)
  Yujie Han, Yuji Furukawa
- Journal Title
  
  The Annals for Micro and Nano Systems 2005-6
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Effect of Chemical Composition upon Mechanical Properties of Thin Layered Mono-Crystal SiC2004
- Author(s)
  A.KAKUTA, Y.FURUKAWA
- Journal Title
  
  Annals of the CIRP 53, No. 1
  
  Pages: 467-470
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Effect of Chemical Composition upon Mechanical Properties of Thin Layered Mono-Crystal SiC2004
- Author(s)
  A.KAKUTA, Y.FURUKAWA
- Journal Title
  
  Annals of the CIRP 53, No.1
  
  Pages: 467-470
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Journal Article] Effect of Chemical Composition upon Mechanical Properties of Thin Layered Mono-Crystal SiC2004
- Author(s)
  A.KAKUTA, Y.FURUKAWA
- Journal Title
  
  Annals of the CIRP 53,No.1
  
  Pages: 467-470
- Data Source
  KAKENHI-PROJECT-16206015
[Patent] バイオ燃料電池用電極およびバイオ燃料電池2006
- Inventor(s)
  古川勇二, 森島圭祐, 古谷昭博, 森内健行, 吉田真, 大田正廣
- Filing Date
  2006-06-01
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Patent] マイクロアクチュエーターシステム2006
- Inventor(s)
  古川勇二, 中馬健一郎, 目崎大輔
- Industrial Property Rights Holder
  東京農工大学
- Industrial Property Number
  2006-220513
- Filing Date
  2006-08-11
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16206015
[Presentation] 身体性認知科学に基づくフライス加工技能の修得・伝承モデルの構築　第3報　身体動作と視線動向の計測2016
- Author(s)
  池田知純、二宮敬一、岡部眞幸、管野恒雄、寺内美奈、繁昌孝二、不破輝彦、和田正穀、古川勇二
- Organizer
  2016年度精密工学会春季大会学術講演会
- Place of Presentation
  千葉県野田市
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25289018
[Presentation] フライス加工中の自律神経及び中枢神経活動評価と技能レベルとの関係2015
- Author(s)
  福原健司、古川眞規、細野雄治、二宮敬一、和田正毅、不破輝彦
- Organizer
  第22回精密工学会学生会員卒業研究発表講演会
- Place of Presentation
  東洋大学白山キャンパス
- Year and Date
  2015-03-17
- Data Source
  KAKENHI-PROJECT-25289018
[Presentation] 身体性認知科学に基づくフライス加工技能のユーザモデルと生体計測との関係2015
- Author(s)
  不破輝彦、菅野恒雄、和田正毅、岡部眞幸、池田知純、二宮敬一、寺内美奈、竹下浩、新目真紀、小山田孝輔、小林優介、西ノ園太一、山田駿太、山本尚明、古川勇二
- Organizer
  ヒューマンインタフェースシンポジウム2015
- Place of Presentation
  北海道函館市
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-25289018
[Presentation] 身体性認知科学に基づくフライス加工技能の修得・伝承モデルの構築　第１報　全体構想と予想される効果2014
- Author(s)
  古川勇二、池田知純、岡部眞幸、菅野恒雄、寺内美奈、二宮敬一、繁昌孝二、不破輝彦、和田正穀
- Organizer
  2014年度精密工学会春季大会学術講演会
- Place of Presentation
  東京大学本郷キャンパス
- Data Source
  KAKENHI-PROJECT-25289018
[Presentation] 超音波マイクロモータの駆動源とステータ部の一体化-圧電ステータコイルの研削システムの開発-2009
- Author(s)
  戸邊哲尋、加賀智之、古川勇二
- Organizer
  精密工学会2009年講演発表会
- Place of Presentation
  中央大学
- Year and Date
  2009-03-11
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] コイル型超音波マイクロモータの小型化に関する研究2009
- Author(s)
  加賀智之、戸選哲尋、古川勇二
- Organizer
  精密工学会2009年講演発表会
- Place of Presentation
  中央大学
- Year and Date
  2009-03-11
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] マイクロ流体デバイスへの応用を目指した長期間室温で自律拍動する昆虫心臓組織の制御法検討2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  第17回化学とマイクロ・ナノシステム研究会
- Place of Presentation
  福岡
- Year and Date
  2008-05-20
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 細胞シート接着力測定システムの開発2008
- Author(s)
  上杉薫, 秋山佳丈, 星野隆行, 古川勇二, 森島圭祐
- Organizer
  第26 回日本ロボット学会学術講演会
- Place of Presentation
  神戸
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Fabrication and Evaluation of Temperature-Tolerant Bioatuator Driven by Insect Heart Cells2008
- Author(s)
  Yoshitake Akiyama, Kikuo Iwabuchi, Yuji Furukawa, Keisuke Morishima
- Organizer
  The Proceedings of Micro TAS 2008 Conference (Micro TAS 2008)
- Place of Presentation
  California, U. S. A
- Year and Date
  2008-10-12
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 細胞シート接着力測定システムの開発2008
- Author(s)
  上杉薫, 秋山佳丈, 星野隆行古川勇二, 森島圭祐
- Organizer
  第26回日本ロボット学会学術講演会, RSJ2008AC1G3-04
- Place of Presentation
  神戸
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 昆虫背脈管組織を用いたバイオアクチュエータの温度依存性の評価, Evaluationof temperature influence on a bioactuator usinginsect dorsal vessel tissue2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会2008(ROBOMEC2008)
- Place of Presentation
  長野
- Year and Date
  2008-06-05
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Development of Ultrasonic Micro Motor with a Foil Type Sator2008
- Author(s)
  Terunao Hirota, Kenji Makita, Tomoyuki Kaga, Tadashi Moriya, Yuji Furukawa
- Organizer
  テクノフロンティア「ブレイクスルーを生み出す次世代アクチュエータ研究」科研アクチュエータ・国際シンポジウム
- Place of Presentation
  幕張メッセ
- Year and Date
  2008-04-17
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] 光合成型バイオフューエルセルの性能向上-吸水性ポリマーを用いた培地還流システムの開発2008
- Author(s)
  古谷昭博, 森内健行, 森島圭祐, 古川勇二
- Organizer
  2008年度精密工学会春季大会
- Place of Presentation
  神奈川
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 光合成型バイオフューエルセルの出力性能に及ぼす電極構造の影響評価2008
- Author(s)
  森内健行, 森島圭祐, 古川勇二
- Organizer
  2008年度精密工学会春季大会
- Place of Presentation
  神奈川
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 昆虫背脈管組織を用いた自律移動型マイクロロボットの実証2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  第26回日本ロボット学会学術講演会, RSJ2008AC1A3-01
- Place of Presentation
  神戸
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Biological Contractile Regulation of Micropillar Actuator Driven by Insect Dorsal Vessel Tissue2008
- Author(s)
  Yoshitake Akiyama, Kikuo Iwabuchi, Yuji Furukawa, and Keisuke Morishima
- Organizer
  The Proceedingsof The second IEEE/RAS-EMBSInternational Conference onBiomedical Robotics andBiomechatronics
- Place of Presentation
  Arizona, U.S.A
- Year and Date
  2008-10-19
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] フォイル型ステータを用いた超音波マイクロモータの駆動原理2008
- Author(s)
  廣田輝直, 牧田賢治, 守屋正, 古川勇二
- Organizer
  精密工学会(2008)
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] 昆虫背脈管組織を用いた自律移動型マイクロロボットの実証2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  第26回日本ロボット学会学術講演会
- Place of Presentation
  神戸
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Biological Contractile Regulation of Micropillar Actuator Driven by Insect Dorsal Vessel Tissue2008
- Author(s)
  Yoshitake Akiyama, Kikuo Iwabuchi, Yuji Furukawa, Keisuke Morishima
- Organizer
  The Proceedings of The second IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics 2008 (BioRob 2008)
- Place of Presentation
  Arizona, U. S. A
- Year and Date
  2008-10-19
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 背脈管組織の自律的収縮を利用した独立移動型マイクロデバイスの実証2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  日本比較生理生化学会, 第30回大会予稿集
- Place of Presentation
  北海道大学, 日本
- Year and Date
  2008-07-12
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 光合成細菌を用いたバイオフューエルセルのフレキシブル構造化2008
- Author(s)
  森内健行, 角田史郎, 森島圭祐, 古川勇二
- Organizer
  2008年度精密工学会春季大会
- Place of Presentation
  神奈川
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] マイクロ流体デバイスへの応用を目指した長期間室温で自律拍動する昆虫心臓一組織の制御法検討2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  第17回化学とマイクロ・ナノシステム研究会
- Place of Presentation
  福岡
- Year and Date
  2008-05-20
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Development of Ultrasonic Micro Motor with a Foil Type Stator2008
- Author(s)
  Terunao Hirota, Kenji Makita, Tomoyuki Kaga, Tadashi Moriya, Yuji Furukawa
- Organizer
  テクノフロンティア「ブレイクスルーを生み出す次世代アクチュエータ研究」科研アクチュエータ・国際シンポジウム
- Place of Presentation
  幕張メッセ
- Year and Date
  2008-04-17
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] 背脈管組織の自律的収縮を利用した独立移動型マイクロデバイスの実証2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  日本比較生理生化学会, 第30回大会予稿集
- Place of Presentation
  北海道大学, 北海道
- Year and Date
  2008-07-12
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 昆虫背脈管組織を用いたバイオアクチュエータの温度依存性の評価", "Evaluation of temperature influence on a bioactuator using insect dorsal vessel tissue2008
- Author(s)
  秋山佳丈, 岩淵喜久男, 古川勇二, 森島圭祐
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会2008(ROBOMEC2008)
- Place of Presentation
  長野, 日本
- Year and Date
  2008-06-05
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 生体筋肉の特性分類とバイオアクチュエータへの適用性2008
- Author(s)
  秋山佳丈、古川勇二, 他2名
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] 薄型コイル型マイクロモーターの駆動原理と試作, 性能評価2008
- Author(s)
  古川勇二、廣田輝直、加賀智之
- Organizer
  「ブレイクスルーを生み出す次世代アクチュエータ研究」第5回科研アクチュエータシンポジウム
- Place of Presentation
  東大武田先端ビル
- Year and Date
  2008-12-09
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] Fabrication and Evaluation of Temperature-Tolerant Bioatuator Driven by Insect Heart Cells2008
- Author(s)
  Yoshitake Akiyama, Kikuo Iwabuchi, Yuji Furukawa and Keisuke Morishima
- Organizer
  The Proceedings of Micro TAS 2008 Conference(MicroTAS 2008)
- Place of Presentation
  California,U.S.A
- Year and Date
  2008-10-12
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Development of Flexible Direct Photosynthetic/metabolic Bio-fuel Cell (DPBFC) for Mobile Use2007
- Author(s)
  Takeyuki Moriuchi, Shiro Sumida, Akihiro Furuya, Keisuke Morishima and Yuji Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology 2007,
- Place of Presentation
  GIST, Korea,
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 0.95mm超小型超音波マイクロモータの開発2007
- Author(s)
  篠原、鈴木、春日、古川、廣田、他
- Organizer
  日本時計学会マイクロメカトロニクス講演会
- Place of Presentation
  中央大学
- Year and Date
  2007-09-07
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] Improvement of power capability applying pyrolyzed carbon photoresistelectrode for Micro Direct Photosynthetic/metabolic Bio-Fuel Cell (DPBFC)2007
- Author(s)
  Takeyuki Moriuchi, Keisuke Morishima and Yuji Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology 2007
- Place of Presentation
  GIST, Korea
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Novel Ultrasonic Micro motor with Coiled Stator and its Application to IVUS2007
- Author(s)
  Terunao Hirota, Kenji Makita, Tadashi Moriya, Yuji Furukawa
- Organizer
  Next-Generation Actuators Leading Breakthroughs
- Place of Presentation
  沖縄宜野湾市沖縄コンベンションセンター
- Year and Date
  2007-11-20
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] Porous Carbon Electrode To Improve Power Of Photosynthetic Bacteria Fuel Cell2007
- Author(s)
  Takeyuki, Moriuchi, Keisuke, Morishima, Yuji, Furukawa
- Organizer
  owerMEMS 2007, Congress and Convention Center
- Place of Presentation
  Germany
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 直接光合成/代謝型バイオ燃料電池に関する研究 -フレキシブル・モバイル形状の開発-2007
- Author(s)
  角田史郎, 古谷昭博, 森内健之, 吉田真, 森島圭祐, 古川勇二
- Organizer
  第15回化学とマイクロ・ナノシステム研究会,
- Place of Presentation
  仙台
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Novel Ultrasonic Micromotor with Foil-type Stator and its Application to IVUS2007
- Author(s)
  Terunao Hirota, Kenji Makita, Tetsuro Wada, Tadashi Moriya, Yuji Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology
- Place of Presentation
  Gwngju Institute of Science and Technology (Korea)
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-19016009
[Presentation] Improvement of power capability applying pyrolyzed carbon photoresist electrode for Micro Direct Photosynthetic/metabolic Bio-Fuel Cell(DPBFC)2007
- Author(s)
  Takeyuki Moriuchi, Keisuke Morishima and Yuji Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology2007
- Place of Presentation
  GIST, Korea
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 量産型バイオアクチュエータを目指した骨格筋細胞の3次元培養に関する検討2007
- Author(s)
  秋山佳丈、古川勇二, 他2名
- Organizer
  第25回日本ロボット学会学術講演会
- Place of Presentation
  千葉
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Improvement of power capability applying pyrolyzed carbon photoresist electrode for Micro Direct Photosynthetic/metabolic Bio-Fuel Cell (DPBFC)2007
- Author(s)
  Takeyuki Moriuchi, Yuji Furukawa 他1名
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology 2007
- Place of Presentation
  Korea
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Development of Flexible Direct Photosynthetic/metabolic Bio-fuel Cell(DPBFC)for Mobile Use2007
- Author(s)
  Takeyuki Moriuchi, Shiro Sumida, Akihiro Furuya, Keisuke Morishima and Yuji Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology 2007,
- Place of Presentation
  GIST, Korea,
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 直接光合成/代謝型バイオ燃料電池に関する研究-フレキシブル・モバイル形状の開発-2007
- Author(s)
  角田史郎, 古谷昭博, 森内健之, 吉田真, 森島圭祐, 古川勇二
- Organizer
  第15回化学とマイクロ・ナノシステム研究会,
- Place of Presentation
  仙台
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Development of Flexible Direct Photosynthetic/metabolic Bio-fuel Cell (DPBFC) for Mobile Use2007
- Author(s)
  Takeyuki, Moriuchi, Shiro, Sumida, Akihiro, Furuya, Keisuke, Morishima, Yuji, Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology 2007, GIST
- Place of Presentation
  Korea
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Porous Carbon Electrode To Improve Power Of Photosynthetic Bacteria Fuel Cell2007
- Author(s)
  Takeyuki Moriuchi, Yuji Furukawa 他1名
- Organizer
  Power MEMS 2007
- Place of Presentation
  Germany
- Data Source
  KAKENHI-PROJECT-19360061
[Presentation] Porous Carbon Electrode To Improve Power Of Photosynthetic Bacteria Fuel Cell2007
- Author(s)
  Takeyuki Moriuchi, Keisuke Morishima and Yuji Furukawa
- Organizer
  PowerMEMS 2007
- Place of Presentation
  Congress and Convention Center, Germany
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Improvement of power capability applying pyrolyzed carbon photoresist electrode for Micro Direct Photosynthetic/metabolic Bio-Fuel Cell(DPBFC)2007
- Author(s)
  Takeyuki, Moriuchi, Keisuke, Morishima, Yuji, Furukawa
- Organizer
  Asian Symposium for Precision Engineering and Nanotechnology 2007 GIST
- Place of Presentation
  Korea
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Improving Performance of Direct Photosynthetic/Metabolic Bio-Fuel Cell(DPBFC)Using Gene Manipulated Bacteria2006
- Author(s)
  Keisuke Morishima, Akihiro Furuya, Takeyuki Moriuchi, Makoto Yoshida, Masahiro Ota and Yuji Furukawa
- Organizer
  The sixth International Workshop on Micro and Nanote chnology for Power Generation and Energy Conversion Applications(PowerMEMS 2006),
- Place of Presentation
  UC Berkeley, USA
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Improving Performance of Direct Photosynthetic/Metabolic Micro Bio Fuel Cell (DPBFC) by Gene Manipulation of Bacteria2006
- Author(s)
  Akihiro, Furuya, Takeyuki, Moriuchi, Makoto, Yoshida, Masahiro, Ota, Keisuke, Morishima, Yuji, Furukawa
- Organizer
  11th International Conference on Precision Engineering (11th ICPE)
- Place of Presentation
  Tokyo, Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Improving Performance of Direct Photosynthetic/Metabolic Bio-Fuel Cell (DPBFC) Using Gene Manipulated Bacteria2006
- Author(s)
  Keisuke, Morishima, Akihiro, Furuya, Takeyuki, Moriuchi, Makoto, Yoshida, Masahiro, Ota, Yuji, Furukawa
- Organizer
  The sixth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications(PowerMEMS 2006)
- Place of Presentation
  UC Berkeley, USA
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Improving Performance of Direct Photosynthetic/Metabolic Micro Bio Fuel Cell(DPBFC)by Gene Manipulation of Bacteria2006
- Author(s)
  Akihiro Furuya, Takeyuki Moriuchi, Makoto Yoshida, Masahiro Ota, Keisuke Morishima and Yuji Furukawa
- Organizer
  11th International Conference on Precision Engineering(11th ICPE)
- Place of Presentation
  Tokyo
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Genetic Conversion of Bacteria and its Application to Micro Direct Photosynthetic/Metabolic Bio-Fuel Cell(DPMFC)2006
- Author(s)
  Akihiro Furuya, Takeyuki Moriuchi Makoto Yoshida, Masahiro Ota Keisuke Morishima and Yuji Furukawa
- Organizer
  The 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences(μTAS)
- Place of Presentation
  Tokyo
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 直接光合成・代謝型マイクロバイオフューエルセルの開発-遺伝子操作細菌と小型化による性能向上-2006
- Author(s)
  古谷昭博, 森内健行, 吉田真, 森島圭祐, 太田正廣, 古川勇二
- Organizer
  ロボティクス・メカトロニクス公演会2006
- Place of Presentation
  東京
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] Genetic Conversion of Bacteria and its Application to Micro Direct Photosynthetic/Metabolic Bio-Fuel Cell (DPMFC)2006
- Author(s)
  Akihiro, Furuya, Takeyuki, Moriuchi, Makoto, Yoshida, Masahiro, Ota, Keisuke, Morishima, Yuji, Furukawa
- Organizer
  The 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences(μTAS)
- Place of Presentation
  Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] 直接光合成/代謝方式によるマイクロバイオフューエルセルの発電原理と試作2006
- Author(s)
  森内健行, Yujie Han, 森島圭祐, 古川勇二
- Organizer
  2006年度精密工学会春季大会
- Place of Presentation
  東京
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360122
[Presentation] フライス加工中における自律神経活動の多面的評価に関する研究
- Author(s)
  福原健司、古川眞規、細野雄治、二宮敬一、和田正穀、不破輝彦
- Organizer
  第22回職業能力開発研究発表講演会
- Place of Presentation
  職業能力開発総合大学校
- Year and Date
  2014-10-17 – 2014-10-18
- Data Source
  KAKENHI-PROJECT-25289018
[Presentation] 身体性認知科学に基づくフライス加工技能の修得・伝承モデルの構築　第２報　自律神経および中枢神経活動の計測
- Author(s)
  不破輝彦、池田知純、岡部眞幸、管野恒雄、寺内美奈、二宮敬一、繁昌孝二、和田正穀、古川勇二
- Organizer
  2014年度精密工学会秋季大会学術講演会
- Place of Presentation
  鳥取大学鳥取キャンパス
- Year and Date
  2014-09-16 – 2014-09-18
- Data Source
  KAKENHI-PROJECT-25289018

1. KAKUTA A. (60224359)

# of Collaborated Projects: 14 results

# of Collaborated Products: 16 results
2. MORONUKI Nobuyuki (90166463)

# of Collaborated Projects: 12 results

# of Collaborated Products: 0 results
3. UCHIGAMA Kenji (90281691)

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
4. ITO Y (60016441)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
5. MORIWAKI T (00031104)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
6. SAKUMA Hideo (20128573)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
7. IWATA Kazuaki (30031066)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
8. OISHI Susumu (70094258)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
9. YOKOGAWA Munehiko (10191496)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
10. YANG Ming (90240142)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
11. MORISHIMA Keisuke (60359114)

# of Collaborated Projects: 3 results

# of Collaborated Products: 60 results
12. YOSHIDA Yoshitaro (80174960)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
13. OKUMURA T. (00117699)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
14. HIROTA Terunao (60372421)

# of Collaborated Projects: 2 results

# of Collaborated Products: 8 results
15. KISHINAMI Takeshi (30001796)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
16. OBA Fuminori (10081267)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
17. TANI Yasuhiro (80143527)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
18. TSUTSUMI Masaomi (90108217)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
19. SAKUMA Atsushi (60274180)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. KANNO Tsuneo (60648921)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
21. WADA Masaki (70648948)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
22. OKABE Masayuki (20152332)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
23. FUWA Teruhiko (70219137)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
24. TERAUCHI Mina (40648979)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
25. IKEDA Tomozumi (80648923)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
26. NINOMIYA Keiichi (20726335)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
27. SUZUKI H (40187761)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. SANAI S (90194878)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. TANAKA Katshimi (00127375)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. KIMURA Fumihiko (60133104)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. HIGUCHI Toshiro (10111569)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. YOSHIBA Masayuki (30094288)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. WATANABE Atsushi (70167104)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. SAKAMOTO Haruhisa (40276514)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. SHIMIZU Shinji (70146801)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. MORITA Noboru (30239660)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. HARADA Tatsuo (70244415)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
38. SHIBAI Hiroshi (70154234)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. MASUDA Hideki (90190363)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
40. YOSHIMURA Takuya (50220736)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
41. KANEKO Arata (30347273)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
42. SASAHARA Hiroyuki (00205882)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
43. YOSHIDA Makoto (60336518)

# of Collaborated Projects: 1 results

# of Collaborated Products: 15 results
44. FUJII Susumu (00031112)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
45. SAITO Katsumasa (40001169)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
46. SAITO Yoshio (00108218)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
47. INASAKI Ichiro (30051650)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
48. SAKAKI Yasuaki (50083332)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
49. 遠山茂樹 (20143381)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
50. 韓玉傑 (80372457)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

FURUKAWA Yuji 古川 勇二

Furukawa Yuji 古川 勇二

Research Projects

Research Products

Co-Researchers

Construction of data acquisition and transfer model for milling machine technology.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

薄膜コイル型マイクロモータの駆動原理と試作、性能評価Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Study on Understanding of Micro Adhesion Mechanism at InterfacialAdhesion Layer Between Biological Cells and Solid SurfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

骨格筋細胞によるマイクロ駆動源の創成Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

偏光レーザ励振マイクロプローブによる分子再配列加工の原理解明Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Effect of Single Crystal Nano-Structured Thin Layer on Nano-Surface IntegrityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

GENERATING AND ITS EVALUATION OF NANO-TEXTURE ON THE BASIS OF SELF-ORGANIZATION OF ATOMS AND PRE-PATTERNED NUCLEIPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

GENERATING AND OBSERBATING OF SiC SUPPER LATTICE AND EXTRA SMOOTH SURFACEPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STABILIZATION ON PROCESS OF EXIMER LASER BY IN SITU MEASUREMENT OF ENERGYPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on mechanism of generating an ultra flat surface by MBEPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

FURUKAWA Yuji 古川勇二

Furukawa Yuji 古川勇二